The Focus ST Boost Solenoid is an essential part of the modern vehicle’s engine, allowing the engine to run more efficiently and with greater power. It is a sophisticated piece of technology that requires a deep understanding of both perplexity and burstiness to be installed correctly. With its ability to control air flow, boost pressure, and other engine functions, the Focus ST Boost Solenoid is an integral part of any high-performance vehicle. Through its intricate design and complex functionality, it ensures that the engine runs at peak performance. With an understanding of how it works and how to properly install it, the Focus ST Boost Solenoid can help to make your car run more effectively and with greater power.
Why Focus ST Boost Solenoid Is Necessary?
A Focus ST boost solenoid is a vital component in the turbocharged engine of the Ford Focus ST. It is responsible for regulating the amount of boost that is delivered to the engine, allowing it to maintain optimal performance. Without this solenoid, the car would not be able to reach its full potential, as its engine would be under- or over-boosted, resulting in decreased performance and potentially damaging the motor. The focus ST boost solenoid helps ensure that the car is running at its best and can reach its full potential.
Comperision Chart for focus st boost solenoid
Vacuum Solenoid Valve Replacement For Focus ST Edge Escape F-150 Explorer Transit Taurus Fusion MKZ MKT 2.0L 3.5L Turbocharged
WILWOOD FOCUS ST 13″ FRONT & REAR BIG BRAKE COMBO W/FREE BRAKE LINES & FLUID, 13″ SUPERLITE FRONT, 13″ CPB REAR, RED CALIPERS, DRILLED & SLOTTED ROTORS, FITS 2013 2014 FOCUS ST
Turbo Turbocharger For Ford Escape Taurus Fusion Focus ST Lincoln MKZ MKC 2.0T – BuyAutoParts 40-31313AN New
Innovate Motorsports (3882 SCG-1 Solenoid Boost Controller and Air/Fuel Ratio Gauge Kit, White, 52mm, Black
FANLIDE Turbocharger Boost Solenoid Valve CJ5Z-9K378-B CJ5Z-9K378-A CJ5G-9K378-BB CJ5G-9K378-BA, Compatible with 2013-2016 Ford Fusion Escape Fiesta Transit Connect Van 1.6L Turbo
Vacuum Solenoid Valve Replacement For Focus ST Edge Escape F-150 Explorer Transit Taurus Fusion MKZ MKT 2.0L 3.5L Turbocharged
Are you looking for a replacement for your Turbocharger Vacuum Solenoid Valve? Look no further than this replacement for Expedition Navigator Explorer Escape Edge Flex MKZ MKC F150 Transit 2.0L 3.5L! It is compatible with 2.0L & 3.5L with turbo engines, and without hybrid 2.0L engines, and has a voltage of 12V. Not only is it an easy direct replacement, it is also very reliable and will last you a long time!
Why We Like This
Easy Direct Replacement: This vacuum solenoid valve replacement is incredibly easy to install and fits perfectly into the vacuum harness line
High Quality: The quality of this valve replacement is extremely high, so you can rely on its performance for years to come
Compatible with Many Models: The valve replacement is compatible with many different models, such as Expedition Navigator Explorer Escape Edge Flex MKZ MKC F150 Transit 2.0L 3.5L
Part Number: This valve replacement comes with the part number BL3Z-9K378-A and replaces AA5Z-9K378-A
Voltage: The voltage of this valve replacement is 12V, so it will be compatible with most vehicles
Common Questions & Answers
Q: Does this fit my car model?
A: This valve replacement should fit the Expedition Navigator Explorer Escape Edge Flex MKZ MKC F150 Transit 2.0L 3.5L models, as well as those without hybrid 2.0L engines that have a voltage of 12V. If your car model isn’t listed here or you’re unsure if it will fit, please contact us for assistance!
Q: What type of engine does this work on?
A: This works on both 2.0L & 3.5L engines with turbochargers as well as those without hybrid 2.0L engines that have a voltage of 12V.
Q: Does this come with any warranties?
A: Yes, all our products come with a one year warranty from purchase date!
Additional Product Information
WILWOOD FOCUS ST 13 FRONT & REAR BIG BRAKE COMBO W-FREE BRAKE LINES & FLUID 13 SUPERLITE FRONT, 13 CPB REAR, RED CALIPERS, DRILLED & SLOTTED ROTORS, FITS 2013 2014 FOCUS ST
The Wilwood Focus ST 13″ Front & Rear Big Brake Combo with FREE Brake Lines & Fluid is the ultimate in performance braking for the 2013-2014 Focus ST. This all-inclusive kit includes Wilwood Superlite 6R front calipers and 12.88″ drilled & slotted rotors, as well as Wilwood CPB rear calipers and 12.88″ drilled & slotted rotors, along with stainless steel brake lines and two bottles of Wilwood 570 fluid. This kit is designed for maximum brake performance and may require 17 wheels or larger to fit correctly.
Why We Like This:
All-inclusive kit comes with front and rear Wilwood big brakes, stainless steel brake lines, and fluid
Superlite 6R front calipers with 12.88″ drilled & slotted rotors provide maximum stopping power
Combination Parking Brake rear calipers also feature 12.88″ drilled & slotted rotors
Stainless steel brake lines ensure improved durability
Wilwood 570 fluid ensures maximum performance from your new brakes
Common Questions & Answers:
Q: Does this kit fit my 2013 Focus ST?
A: Yes, this kit is designed specifically for the 2013-2014 Focus ST model.
Q: What size wheels are required for this brake kit?
A: This kit requires 17 wheels or larger to fit correctly.
Q: Does this kit come with everything I need to install it?
A: Yes, this all-inclusive kit includes Wilwood Superlite 6R front calipers and 12.88″ drilled & slotted rotors, as well as Wilwood CPB rear calipers and 12.88″ drilled & slotted rotors, along with stainless steel brake lines and two bottles of Wilwood 570 fluid.
Additional Product Information
| Weight | 165 |
| Size | Large |
Turbo Turbocharger For Ford Escape Taurus Fusion Focus ST Lincoln MKZ MKC 2.0T – BuyAutoParts 40-31313AN New
Are you looking for a reliable and efficient turbocharger for your Ford Escape Taurus Fusion Focus ST Lincoln MKZ MKC 2.0T? Look no further than the Turbo Turbocharger from BuyAutoParts 40-31313AN. This turbocharger is CARB-approved and 50-state emissions legal, making it safe and reliable to use. It is engineered for superior durability, and you can be sure that it will last a long time with its one year, unlimited-mileage warranty. This turbocharger is also guaranteed to be an exact fit for easy installation.
Why We Like This
Guaranteed Exact Fit for easy installation
CARB-approved and 50-state emissions legal
Engineered for superior durability
One year, unlimited-mileage warranty
100% BRAND NEW replacement turbo
Common Questions & Answers
Q: Does the Turbo Turbocharger from BuyAutoParts 40-31313AN fit my car?
A: Yes, this turbocharger is designed to fit 2013-2017 Ford Taurus, 2013-2018 Ford Focus ST, 2013-2016 Ford Fusion, 2013-2016 Ford Escape, 2013-2016 Lincoln MKZ, 2015-2016 Lincoln MKC, and 2016 Lincoln MKT all equipped with the 2.0L 4cyl engine.
Q: Is this turbocharger CARB approved?
A: Yes, it is CARB approved and 50 state emissions legal so you can be sure that it is safe to use.
Q: What kind of warranty comes with this turbocharger?
A: This turbocharger comes with a one year, unlimited mileage warranty so you can be sure that it will last.
Additional Product Information
| Length | 17 |
| Weight | 18 |
| Width | 14 |
Innovate Motorsports (3882 SCG-1 Solenoid Boost Controller and Air-Fuel Ratio Gauge Kit White, 52mm, Black
The Innovate Motorsports 3882 SCG-1 Solenoid Boost Controller and Air/Fuel Ratio Gauge Kit is the perfect combination of convenience, precision, and ease of use. This kit includes everything you need to control boost on your vehicle, from a programmable waste gate reference pressure threshold to a programmable solenoid duty cycle with a separate gain control function. The kit also comes with an OLED user configurable display and a 4 BAR map sensor that can measure a pressure range of -29 inches Hg to 43.5 PSI (-1 to 3 BAR). With this kit you can get the most out of your ride without having to worry about complicated setup or tuning.
Why We Like This
User programmable boost cut safety using Air/Fuel and Pressure references
Programmable waste gate reference pressure threshold
Programmable solenoid duty cycle with separate gain control function
Programmable shift light & OLED user configurable display
No PC required for configuration and use (Required for data logging)
4 BAR map sensor, pressure range -29 inHG to 43.5 PSI (-1 to 3 BAR)
Common Questions & Answers
Q: Does this product come with installation instructions?
A: Yes, it does come with installation instructions that will guide you through the process of setting up the system.
Q: Does this product require a PC for configuration and use?
A: No, it does not require a PC for configuration or use. However, it is required if you want to do data logging.
Q: Is this product compatible with all vehicles?
A: The Innovate Motorsports 3882 SCG-1 Solenoid Boost Controller and Air/Fuel Ratio Gauge Kit is designed for universal application, but we advise that you check your vehicle’s specifications before making a purchase.
Additional Product Information
| Height | 3 |
| Length | 3 |
| Weight | 1.10231131 |
| Width | 3 |
FANLIDE Turbocharger Boost Solenoid Valve CJ5Z-9K378-B CJ5Z-9K378-A CJ5G-9K378-BB CJ5G-9K378-BA Compatible with 2013-2016 Ford Fusion Escape Fiesta Transit Connect Van 1.6L Turbo
Are you looking to upgrade your car’s turbocharger system? The FANLIDE Turbocharger Boost Solenoid Valve is here to save the day! This solenoid valve is designed to ensure original equipment performance and safety standards for your vehicle. It is made with high-quality materials and components, making it highly reliable. It is also easy to install and replace, so you don’t have to worry about spending hours trying to make it work. With this solenoid valve, you can say goodbye to your old or broken one and improve the performance of your car’s turbocharger system.
Why We Like This
Original equipment performance and safety standards: This solenoid valve ensures that your vehicle is working at its best and meets all safety regulations.
Stable characteristics and high reliability: Made with high quality materials and components, this solenoid valve has a long lifespan, so you dont have to worry about replacing it anytime soon.
Easy to install: This solenoid valve is designed for easy installation so that you dont have to spend hours trying to get it working properly.
Replacement Part Number: CJ5G-9K378-BA, CJ5G-9K378-BB, CJ5Z-9K378-A, CJ5Z-9K378-B.
Compatible with 2013 – 2019 Ford Fusion Escape Fiesta Transit Connect models: With this solenoid valve, you can improve the performance of those cars as well!
Common Questions & Answers
Q: What cars are compatible with this solenoid valve?
A: This solenoid valve is compatible with 2013 – 2019 Ford Fusion Escape Fiesta Transit Connect models.
Q: Does this product meet original equipment performance and safety standards?
A: Yes, this product meets original equipment performance and safety standards.
Q: How easy is it to install this solenoid valve?
A: This solenoid valve has been designed for easy installation so that you can get it up and running in no time at all!
Additional Product Information
| Length | 3.15 |
| Width | 1.97 |
Benefits of Focus ST Boost Solenoid
1. Increased engine performance: The Focus ST boost solenoid helps to increase the overall power output of the engine by providing a more consistent boost pressure level.
2. Improved fuel efficiency: By controlling the amount of air entering the engine, the Focus ST boost solenoid helps to reduce fuel consumption and improve vehicle efficiency.
3. Improved throttle response: The Focus ST boost solenoid helps to provide a more responsive and smoother throttle response, allowing for better acceleration and faster shifting.
4. Reduced turbo lag: By controlling the amount of air entering the engine, the Focus ST boost solenoid helps to reduce turbo lag and provide a more immediate response from the turbocharger when accelerating from low RPMs.
5. Reduced emissions: By reducing the amount of air entering into the engine, the Focus ST boost solenoid helps to reduce harmful emissions that can damage both your vehicle and environment.
Buying Guide for focus st boost solenoid
What is a Focus ST Boost Solenoid?
A Focus ST Boost Solenoid is a device used to control the boost pressure of the turbocharger on Ford’s popular Focus ST model. This solenoid allows for an adjustable boost level from factory settings to higher levels. It can be used to increase the power output of the engine and provide more performance from the vehicle.
Benefits of Installing a Focus ST Boost Solenoid
Installing a focus st boost solenoid can be beneficial for several reasons. It allows for adjustable boost levels, meaning you can increase or decrease the amount of boost based on your preferences. This can lead to improved performance, increased power output, and better fuel economy. It also helps with exhaust emissions by reducing the amount of unburned fuel that is exiting the engine. Additionally, installing this part can help extend the life of your turbocharger by preventing it from being over-stressed due to excessive boost levels.
Things To Consider Before Buying
When buying a focus st boost solenoid there are several things to consider before making a purchase. First, its important to make sure that the part youre purchasing will fit your vehicles model and year. Additionally, you should make sure that its compatible with other modifications you may have made or plan on making in order to prevent any issues with compatibility or installation. Its also important to research and read reviews about different models and brands before buying in order to ensure youre getting a quality product that will last for years and perform as expected.
Where To Buy
When looking for a focus st boost solenoid there are several places you can buy from such as online retailers, auto parts stores, and even some dealerships may carry them as well. When shopping online, its important to compare prices across different websites in order to get the best deal possible while still ensuring quality and compatibility with your vehicle. Additionally, some auto parts stores may have them in stock or be able to special order them if needed. Finally, some dealerships may have them available as well so it could be worth checking out their selection if they carry Ford vehicles in their inventory.
The Focus ST Boost Solenoid is an important component of the Focus ST engine, as it helps to regulate and control the boost pressure in the engine. It is a relatively simple device, but it is an important part of keeping the engine running properly and efficiently. With proper maintenance and regular inspection, the Focus ST Boost Solenoid can help to ensure that your car runs at its best for many years to come.
