Why Drive In Grease Fitting Is Necessary?
Best drive in grease fitting is necessary to ensure that the grease is properly distributed to all the moving parts of the machinery. It also helps in extending the life of the machinery by preventing excessive wear and tear.
Our Top Picks For Best Drive In Grease Fitting
Best Drive In Grease Fitting Guidance
1/4″ Straight Head Angle, Drive (Push-In) Grease Fitting, Zinc-Plated Steel, 35/64″L, 5000 psi, PK10-1 Each
When it comes to grease fittings, there are a few things to consider – like what size, head angle, and drive you need. But don’t worry, we’re here to help! In this article, we’ll be discussing 1/4″ straight head angle, drive (push-in) grease fittings, made of zinc-plated steel.
First, let’s start with the basics. Grease fittings, also called lubrication fittings or Zerk fittings, are used to add grease to a bearing or other moving part. The purpose of grease is to reduce friction and wear on bearings, which can help extend their lifespan.
There are two main types of grease fittings: threaded and push-in. Threaded grease fittings have a male thread on the outside that screws into a female thread on the part to be lubricated. Push-in grease fittings have a small diameter that allows them to be pressed into a pre-drilled hole in the part.
Our 1/4″ straight head angle, drive (push-in) grease fittings are made of zinc-plated steel for strength and durability. The overall length is 35/64
Common Questions on 1/4″ Straight Head Angle, Drive (Push-In) Grease Fitting, Zinc-Plated Steel, 35/64″L, 5000 psi, PK10-1 Each
• What is the dimensions of 1/4″ Straight Head Angle, Drive (Push-In) Grease Fitting, Zinc-Plated Steel, 35/64″L, 5000 psi, PK10-1 Each?The dimensions of 1/4″ Straight Head Angle, Drive (Push-In) Grease Fitting, Zinc-Plated Steel, 35/64″L, 5000 psi, PK10-1 Each are: Length – 35/64″, Width – 1/4″, Height – 1/4″.
• What is the maximum pressure rating for 1/4″ Straight Head Angle, Drive (Push-In) Grease Fitting, Zinc-Plated Steel, 35/64″L, 5000 psi, PK10-1 Each?
The maximum pressure rating for 1/4″ Straight Head Angle, Drive (Push-In) Grease Fitting, Zinc-Plated Steel, 35/64″L, 5000 psi, PK10-1 Each is 5000 psi.
• What is the minimum order quantity for 1/4″ Straight Head Angle, Drive (Push-In) Grease Fitting, Zinc-Plated Steel, 35
Why We Like This
Zinc plated steel for durability and corrosion resistance
Push in grease fitting for easy installation
35/64″ overall length
5000 psi rating
Pack of 10
Additional Product Information
| Color | Steel |
| Height | 0.8 Inches |
| Length | 4.3 Inches |
| Weight | 0.1 Pounds |
LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool. for use to Install Straight Type Drive-in Fittings. High Strength Steel. 4-1/2” Long, ¾” Diameter.
The LUMX LX-1430 grease fitting tool is a high-strength steel tool that is zinc-plated for corrosion resistance. It is 4-1/2″ long and 3/4″ in diameter. The LX-1430 is used to install straight type drive-in fittings.
Common Questions on LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool. for use to Install Straight Type Drive-in Fittings. High Strength Steel. 4-1/2” Long, ¾” Diameter.
• What is the LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool used for?The LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool is used to install straight type drive-in fittings.
• What is the LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool made of?
The LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool is made of high strength steel.
• How long is the LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool?
The LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool is 4-1/2” long.
• How wide is the LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool?
The LUMAX LX-1430 Silver Straight Drive Grease Fitting Tool has a ¾” diameter.
Why We Like This
• 1. Zinc plated corrosion resistant finish.• 2. High strength steel.• 3. For use to install straight type drive in fittings.• 4. 4 1/2” long, 3/4” diameter.• 5. Silver color.
Additional Product Information
| Color | Silver |
| Weight | 0.55 Pounds |
LUMAX LX-3511-10 Gold/Silver Drive Type Straight 0.56″ Long Grease Fitting for 5/16″ Diameter Hole, (Pack of 10). Drive Fittings Avoid Tapping Costs.
Lubrication is one of the most important aspects of keeping machinery running smoothly and efficiently. LUMAX LX-3511-10 Gold/Silver Drive Type Straight 0.56″ Long Grease Fitting for 5/16″ Diameter Hole, (Pack of 10) are an easy and reliable way to make sure that your machines are adequately lubricated. Simply insert the grease fitting into the desired lubrication point and then use a grease gun to apply the grease.
Drive fittings are an easy and quick way to lubricate your machines without having to tap costs. The passivated finish on these grease fittings provides maximum protection against corrosion. The spring is made from stress relieved and tempered carbon steel for extra strength. The ball check in the head of the grease fitting prevents dirt and other contaminants from getting into the lubrication point.
Common Questions on LUMAX LX-3511-10 Gold/Silver Drive Type Straight 0.56″ Long Grease Fitting for 5/16″ Diameter Hole, (Pack of 10). Drive Fittings Avoid Tapping Costs.
• What is the price of the LUMAX LX-3511-10 Grease Fitting?The price of the LUMAX LX-3511-10 Grease Fitting is $7.99.
• What is the Drive Type of the LUMAX LX-3511-10 Grease Fitting?
The Drive Type of the LUMAX LX-3511-10 Grease Fitting is Straight.
• What is the Length of the LUMAX LX-3511-10 Grease Fitting?
The Length of the LUMAX LX-3511-10 Grease Fitting is 0.56″.
• What is the Diameter of the LUMAX LX-3511-10 Grease Fitting?
The Diameter of the LUMAX LX-3511-10 Grease Fitting is 5/16″.
• What is the Number of the LUMAX LX-3511-10 Grease Fitting?
The Number of the LUMAX LX-3511-10 Grease Fitting is 10.
Why We Like This
• 1. Drive fittings avoid tapping costs• 2. Passivated finish for maximum protection from corrosion• 3. Heavier wall thickness for extra strength• 4. Stress relieved and tempered carbon steel spring• 5. Ball check in head prevents dirt from getting in
Drive Fittings – 1/4″ drive type grease fitting [Set of 10]
If you’re looking for a quick and easy way to add grease fittings to your 1/4″ drive, look no further than this set of 10 fittings. These fittings are made of high quality brass and are designed to withstand the high pressures of greasing. With a wide variety of sizes and styles to choose from, these fittings will make it easy to get the grease where it needs to go.
Common Questions on Drive Fittings – 1/4″ drive type grease fitting [Set of 10]
• What are the dimensions of the product?The dimensions are as follows: Length – 1.062″, Diameter – .405″.
• What is the thread size of the product?
The thread size is 1/4”-28.
• What is the maximum operating pressure for this product?
The maximum operating pressure is 10,000 PSI.
• What is the temperature range for this product?
The temperature range is -40°F to 212°F.
• What is the material that this product is made of?
The material is steel.
Why We Like This
1/4″ drive type grease fitting
Made of high quality steel
Set of 10
Zinc plated for durability
Easy to install
LUMAX LX-3505-10 Gold/Silver Drive Type Straight 0.50″ Long Grease Fitting for 3/16″ Diameter Hole, (Pack of 10). Circumferential Serrated Shank Provides a Grease Tight Seal When Installed.
Lubrication is essential for many machines, and one of the most common ways to apply lubrication is with grease. Grease is a thick, oily substance that is used to keep moving parts in machines well-lubricated and running smoothly. Applying grease to a machine can be done in many ways, but one of the most common and most efficient methods is to use a grease fitting.
A grease fitting, also called a grease nipple, is a small metal fixture that is used to deliver grease to a machine. Grease fittings have a small hole in the center that is used to insert grease into the machine, and they are typically made of brass or stainless steel. Grease fittings are typically installed in areas where there is a lot of friction, such as bearings, gears, and other moving parts.
Grease fittings are available in various sizes and thread types. The most common size is 3/16-inch, but 1/8-inch and 1/4-inch sizes are also available. The type of thread will depend on the make and model of the machine. The most common thread types are NPT (National Pipe Thread) and BSPP (British Standard Pipe Parallel).
When selecting a grease fitting
Common Questions on LUMAX LX-3505-10 Gold/Silver Drive Type Straight 0.50″ Long Grease Fitting for 3/16″ Diameter Hole, (Pack of 10). Circumferential Serrated Shank Provides a Grease Tight Seal When Installed.
• What is the model number of this product?The model number is LX-3505-10.
• What is the size of this product?
This product is 0.50″ long.
• What is the drive type of this product?
The drive type is straight.
• What is the shank type of this product?
The shank type is circumferential serrated.
• What is the fit type of this product?
The fit type is for a 3/16″ diameter hole.
Why We Like This
1. Circumferential Serrated Shank Provides a Grease Tight Seal When Installed.
2. Drive fittings avoid tapping costs.
3. Passivated finish for maximum protection from corrosion.
4. Heavier wall thickness for extra strength.
5. Stress relieved and tempered carbon steel spring.
Additional Product Information
| Color | Gold/Silver |
| Weight | 0.07 Pounds |
Benefits of Drive In Grease Fitting
A grease fitting, also known as a grease nipple, is a self-sealing fitting used to lubricate bearings and other moving parts in mechanical systems. Grease fittings are usually found on motorized equipment such as cars, trucks, construction machinery and industrial machinery.
The purpose of using a grease fitting is to provide a way to introduce new lubricant into the system without having to disassemble the entire system. For example, if you wanted to add more grease to the bearings on your car’s wheels, you would simply locate the appropriate grease fittings and insert the tip of your greasing gun into each one.
Buying Guide for Best Drive In Grease Fitting
When looking for the best drive in grease fitting, you should consider the following:
-Type of bearing: The first thing to consider when choosing a grease fitting is the type of bearing that you have. There are three main types of bearings: ball, roller, and sleeve. Each type requires a different type of grease fitting. Ball bearings need a small, metal-tipped grease fitting; roller bearings require a large, plastic-tipped fitting; and sleeve bearings need either a small or large plastic-tipped fitting.
-Size of bearing: The second thing to consider is the size of your bearing. Grease fittings come in different sizes, so you’ll need to know the measurement of your bearing before you can purchase the correct size greasefitting.
-Material: The third thing to think about is what material the grease fitting is made out of. Metal greases tend to be more durable than plastic ones, but they can also be more expensive. It’s important to find a balance between cost and durability when selecting your material.
Frequently Asked Question
What is the best drive in grease fitting?
Some factors to consider when choosing a grease fitting include the size and type of the bearing, the operating environment, and the amount of grease required.
What are the benefits of a drive in grease fitting?
There are several benefits to using a drive in grease fitting: 1. Drive in grease fittings are easy to install and require no special tools or equipment. 2. They are less likely to leak than traditional grease fittings, and provide a tight seal that helps prevent contamination. 3. Drive in grease fittings are less likely to become damaged or dislodged, and can be used in a wide variety of applications. 4. They provide a quick and convenient way to lubricate bearings and other moving parts, and can help extend the life of your equipment.
How does a drive in grease fitting work?
A drive in grease fitting works by being inserted into a grease port. The tapered end of the fitting is driven into the port until the o-ring seals against the port wall. This creates a grease-tight seal.
What are the best practices for using a drive in grease fitting?
There are a few best practices to follow when using a drive in grease fitting: – Always use the correct size and type of grease fitting for the application. – Inspect the grease fitting before each use to ensure that it is not damaged and that the O-ring is in place and in good condition. – When attaching the grease fitting to the grease fitting port, be sure to hand-tighten only. Over-tightening can damage the threads or break the grease fitting. – Apply a small amount of grease to the tip of the grease gun before attaching it to the grease fitting. This will help to seal the connection and prevent grease from leaking out. – When grease is being dispensed, keep the grease gun at a consistent angle so that the grease is being pushed into the bearing and not forced out around the grease fitting.
What are some common problems with drive in grease fittings?
The most common problems with drive in grease fittings are that they can become clogged with grease and dirt, and that they can be difficult to remove once they are installed.
Conclusion
Thank you for your time. I know that you are very busy, so I’ll just get to the point. Our product is the best drive in grease fitting on the market and it will make your life so much easier. You won’t have to worry about grease fitting anymore. It’s easy to use and it’s very affordable. So please, take a chance on our product and you will be very happy that you did.
