The 782 was succeeded by the 882 in 1981. The 882 had an updated chassis and an improved transmission. In 1983, the 982 was introduced. It featured a new V-twin engine and updated suspension. In 1985, the 1082 was introduced. It featured a larger V-twin engine and hydrostatic transmission. The 1182 was introduced in 1987, it featured an even larger V-twin engine and updated suspension.
In 1991, the 1282 was introduced. It featured a twin cylinder Kohler engine and hydrostatic transmission. The 1382 was introduced in 1993, it featured aUpdated styling and a twin cylinder Kohler engine with hydrostatic transmission. The 1450 was introduced in 1995, it featured a twin cylinder Kohler Magnum engine and hydrostatic transmission.
Why Cub Cadet Steering Gear Is Necessary?
Best cub cadet steering gear is necessary to ensure proper and efficient functioning of the steering system of a vehicle. It also helps in maintaining the longevity of the steering system by preventing premature wear and tear.
Our Top Picks For Best Cub Cadet Steering Gear
Best Cub Cadet Steering Gear Guidance
Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046 LT1050
The Cub Cadet LT1042 is a lawn tractor that was produced by Cub Cadet in 2003. The tractor has a 42″ cutting deck and is powered by a 20hp Kohler Courage engine. The LT1042 was replaced by the LT1045 in 2005.
The steering shaft pinion gear is a small gear that is mounted on the steering shaft. The pinion gear meshes with the steering gear, which is a larger gear located in the front of the tractor. The pinion gear is what turns the steering wheel when you turn the steering wheel. The pinion gear can become worn over time and will need to be replaced. The bushing is located under the pinion gear and is what the pinion gear sits on. The bushing can also become worn over time and will need to be replaced.
Replacing the steering shaft pinion gear and bushing is a fairly simple process. First, you will need to remove the old pinion gear and bushing. Next, you will need to install the new pinion gear and bushing. Finally, you will need to adjust the steering wheel so that it is centered.
Common Questions on Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046 LT1050
• What is the Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046 LT1050?The Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046 LT1050 is a device that helps to connect the steering wheel to the wheels of the car. It is located in between the two and works to convert the rotational motion of the steering wheel into the linear motion needed to turn the wheels.
• Where is the Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046 LT1050 located?
The Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046 LT1050 is located in between the steering wheel and the wheels of the car.
• How does the Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046 LT1050 work?
The Aaron Steering Shaft Pinion Gear & Bushing for Cub Cadet LT1042 LT1045 LT1046
Why We Like This
• Fits Cub Cadet 1170, 1180, 1212, 1515, 1517, 1525, 1527, 1529, 1600, 1800• Fits Cub Cadet LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1050, SLT1550, SLT1554, GT1222, GT1554• Fits Troy Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54• Fits Columbia CR30, White LT 5000, MTD Gold, Lawn Chief 46″ Deck, Yard Man, Yard Machines• Replaces MTD 717 1554 917 1554 941 0656A 741 0656A
Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050
The Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050 is a must-have for anyone with a Cub Cadet riding lawn mower. This part is used to replace the pinion gear and bushing on the steering shaft of your mower. It is an 11 tooth splined bore that fits onto the rotary 13229 bushing. The Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050 is made to fit the following Cub Cadet models: LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050, SLT1550, SLT1554, GT1222, and GT1554.
Common Questions on Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050
• What are the dimensions of the Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050?The dimensions of the Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050 are 3.54 x 2.36 x 0.39 inches.
• What is the weight of the Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear & Bushing for MTD Cub Cadet 717-1554 917-1554,Replace Toro 112-0863 & Cub Cadet LT1042 LT1045 LT1046 LT1050?
The weight of the Huthbrother Gear Bush 941-0656A 741-0656A Pinion Gear &
Why We Like This
• 1. Steering Shaft Pinion Gear & Bushing For MTD 741 0656 941 0656A 717 1554 Toro 112 0863• 2. Used on Riders since 1999 11 Tooth Splined Bore• 3. Cub Cadet LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050, SLT1550, SLT1554, GT1222, GT1554• 4. Fits: Troy Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54• 5. Replaces Part Numbers： For MTD 717 1554, Toro 112 0863, Cub Cadet LT1042 LT1045 LT1046 LT1050, Hex Steering Bushing Specs, ID: 5/8″ Ht: 1/4″
Steering Sector Gear Plate and Pinion Gear Replaces 717-1550F 7171550 7171554 for Mtd Cub Cadet LT1018 LT1022 LT1040 LT1042 LTX1040 LTX1042 LTX1046 LTX1050 for Mtd Troy Bilt
When it comes to repairing or maintaining your Cub Cadet or Troy-Bilt lawn tractor, one of the most important parts to keep an eye on is the steering sector gear plate and pinion gear. These two components work together to provide smooth and precise steering for your lawn tractor, and over time they can wear down and need to be replaced.
Luckily, we carry a steering sector gear plate and pinion gear replacement kit that fits a variety of Cub Cadet and Troy-Bilt lawn tractor models. This kit includes everything you need to replace your steering sector gear plate and pinion gear, and it’s an easy way to get your lawn tractor steering back in tip-top shape.
If you’re not sure if this kit will fit your lawn tractor, please contact us and we’ll be happy to help. And, as always, be sure to consult your lawn tractor’s owner’s manual before performing any maintenance or repairs.
Common Questions on Steering Sector Gear Plate and Pinion Gear Replaces 717-1550F 7171550 7171554 for Mtd Cub Cadet LT1018 LT1022 LT1040 LT1042 LTX1040 LTX1042 LTX1046 LTX1050 for Mtd Troy Bilt
• What are the dimensions of the Steering Sector Gear Plate and Pinion Gear?The Steering Sector Gear Plate and Pinion Gear measure 717-1550F 7171550 7171554.
• What is the weight of the Steering Sector Gear Plate and Pinion Gear?
The Steering Sector Gear Plate and Pinion Gear weigh 1.85 lbs.
• What is the part number for the Steering Sector Gear Plate and Pinion Gear?
The part number for the Steering Sector Gear Plate and Pinion Gear is 717-1550F 7171550 7171554.
• What is the material of the Steering Sector Gear Plate and Pinion Gear?
The Steering Sector Gear Plate and Pinion Gear are made of Plastic and Metal.
Why We Like This
• Steering sector gear plate and pinion gear replaces 717 1550F 7171550 7171554 for MTD Cub Cadet LT1018 LT1022 LT1040 LT1042 LTX1040 LTX1042 LTX1046 LTX1050 for MTD Troy Bilt• Fits for Cub Cadet LT1018, LT1022, LT1040, LT1042, LT1045, LT1046, LT 1050, LTX1040, LTX1042, LTX1046, LTX1050, LGT1050, LGT1054, LGTX1050, LGTX1054, GT1054, GT1554, GT1222, GTX1054, SLT1550, SLT1554, SLTX1050, SLTX1054. Also fits for Troy Bilt TB1942, TB2142, TB2246, TB2450, TB2654, GT2654, GTX2446, LTX1842• Replaces: 717 1550, 717 1550A, 717 1550B, 717 1550C, 717 1550D,
Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit Compatible with MTD 717-1554 941-0656A 741-0656 Fits Toro 112-0863 and Cub Cadet LT1042 LT1045 LT1046 LT1050
When it comes to lawn care, your riding mower or lawn tractor is a vital tool. But, like any machine with moving parts, it needs regular maintenance to keep it running at its best. One important factor in maintaining your riding mower or lawn tractor is the steering shaft pinion gear and bushing kit.
The steering shaft pinion gear is responsible for converting the steering wheel’s rotational motion into linear motion, which then turns the front wheels. The bushing kit helps to support and align the steering shaft, as well as reduce vibration.
Over time, the bushing can wear down, causing the steering shaft to become misaligned. This can lead to poor steering performance and uneven tire wear. Replacing the bushing kit and steering shaft pinion gear on a regular basis will help keep your riding mower or lawn tractor running smoothly.
Common Questions on Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit Compatible with MTD 717-1554 941-0656A 741-0656 Fits Toro 112-0863 and Cub Cadet LT1042 LT1045 LT1046 LT1050
• What is the part number for the Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit Compatible with MTD 717-1554 941-0656A 741-0656 Fits Toro 112-0863 and Cub Cadet LT1042 LT1045 LT1046 LT1050?The part number for the Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit is 717-1554.
• What are the dimensions of the Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit?
The dimensions of the Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit are 3.54 x 2.36 x 0.98 inches.
• What is the weight of the Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit?
The weight of the Ohoho 2 x Pack 717-1554 Steering Shaft Pinion Gear & Bushing Kit is 0.58 pounds.
•
Why We Like This
• Replacement part for MTD 717 1554, Toro 112 0863 941 0656A, 741 0656• Used on Riders since 1999• 11 tooth Splined bore• Hex Steering Bushing Specs, ID: 5/8″ Ht: 1/4″• Replacement Steering Shaft Pinion Gear Bushing for Troy Bilt Bronco Horse Big Red GT50 GT54
Pinion Gear&Bushing Kit Fit for Cub Cadet LT1040 LT1045 LT1050 Lawnmower – Bearing-Hex Flange&Steering Gear Fits Troy-Bilt Toro White Huskee Lawn Tractor, Replace 717-1554 Gear&941-0656A Hex Nut,2Pack
This bushing and pinion gear set is designed to fix lawn mower steering issues. The pinion gear replaces MTD 717-1554, and the bearing-hex flange replaces 941-0656A. The hex steering bushing has the following specs: ID: 5/8″ Ht: 1/4″. This kit is compatible with MTD Cub Cadet LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050,LT1054, LT1055, LT1550, SLT1550, SLT1554, GT1222, GT1554 lawn tractor. It also fits Troy-Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54 riding mower, Columbia CR30, White LT-5000, MTD Gold, Lawn Chief 46″ Deck, Yard-Man, Yard Machines, Huskee, White garden tractors.
Common Questions on Pinion Gear&Bushing Kit Fit for Cub Cadet LT1040 LT1045 LT1050 Lawnmower – Bearing-Hex Flange&Steering Gear Fits Troy-Bilt Toro White Huskee Lawn Tractor, Replace 717-1554 Gear&941-0656A Hex Nut,2Pack
• What is a pinion gear?A pinion gear is a small gear that meshes with a large gear to transfer motion.
• What is a bushing kit?
A bushing kit is a collection of small metal or plastic pieces that act as bearings to allow smooth movement between two surfaces.
• How does a pinion gear fit for Cub Cadet LT1040 LT1045 LT1050 Lawnmower?
The pinion gear fits into the lawnmower’s steering gear, and the bushing kit helps to allow smooth movement between the two surfaces.
• Why is it important to have a pinion gear?
The pinion gear is necessary to transfer motion from the lawnmower’s steering wheel to the lawnmower’s wheels.
• How often should I replace my pinion gear?
You should replace your pinion gear every few years, or as needed.
Why We Like This
• 1. Fixes lawn mower steering issues• 2. Compatible with MTD Cub Cadet LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050,LT1054, LT1055, LT1550, SLT1550, SLT1554, GT1222, GT1554 lawn tractor• 3. Also fits Troy Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54 riding mower, Columbia CR30, White LT 5000, MTD Gold, Lawn Chief 46″ Deck, Yard Man, Yard Machines, Huskee, White garden tractors• 4. Steering shaft pinion gear replaces MTD 717 1554 The bearing hex flange replaces 941 0656A• 5. Hex Steering Bushing Specs, ID: 5/8″ Ht: 1/4″
Additional Product Information
| Weight | 0.19 Pounds |
Benefits of Cub Cadet Steering Gear
There are many benefits of using the best Cub Cadet steering gear. One of the biggest benefits is that it gives your Cub Cadet zero-turn lawnmower superb maneuverability. TheCub Cadet steering gear also makes it easier to operate your lawnmower on hilly terrain and tight spaces. Additionally, theCub Cadet steering gearCreates a much smoother ride for you and your family while operator your lawn mower.
Buying Guide for Best Cub Cadet Steering Gear
When it comes to choosing the best Cub Cadet steering gear for your riding mower, there are a few things you need to take into consideration. First, you need to identify the problem that you’re having with your steering. Are you experiencing difficulty steering in a straight line? Are your wheels slipping when you turn? Is your mower vibrating excessively while you’re driving?
Once you’ve identified the problem, it’s time to start shopping around for the best Cub Cadet steering gear that will address your specific issue. You can find a variety of aftermarket Cub Cadet steering gears online and at most lawn and garden stores. Be sure to read the reviews before purchasing to ensure that you’re getting a quality product.
When installing your new Cub Cadet steering gear, be sure to follow the instructions carefully. If you have any questions, consult with a professional mechanic or lawn care specialist.
Frequently Asked Question
What are the best Cub Cadet steering gears for my lawn tractor?
There is no definitive answer to this question as it depends on personal preferences and opinions. Some people might say that the best Cub Cadet steering gears are those that provide the smoothest and most responsive steering, while others might prefer gears that are more durable and require less maintenance. Ultimately, it is up to the individual to decide which steering gears are best for their lawn tractor.
What is the difference between the various Cub Cadet steering gears?
There are three types of steering gears on Cub Cadet lawn tractors: manual, power, and zero-turn. Manual steering is the least expensive and most basic type. Power steering is more expensive but makes it easier to steer the tractor. Zero-turn steering is the most expensive but allows for the tightest turning radius.
Which Cub Cadet steering gear is right for me?
Some of the most popular Cub Cadet steering gears include the Cub Cadet Heavy-Duty Steering Gear, the Cub Cadet Deluxe Steering Gear, and the Cub Cadet Super Steering Gear.
How do I know if my Cub Cadet steering gear is compatible with my lawn tractor?
In general, it is advisable to consult the Cub Cadet website or a Cub Cadet dealer, as they will be able to provide specific compatibility information.
How do I install my Cub Cadet steering gear?
If your Cub Cadet lawn tractor is steering hard to one side, or if the steering wheel is hard to turn, the steering gear may need to be replaced. Replacing the steering gear is a fairly easy repair that can be done by most do-it-yourselfers. 1. Park the Cub Cadet on a level surface and turn off the engine. Remove the key from the ignition. 2. Raise the hood and disconnect the negative battery cable from the battery. 3. Place a drain pan under the steering gear and remove the two bolts that hold the gear in place. 4. Remove the old steering gear from the tractor. 5. Install the new steering gear in the same position as the old one. 6. Reattach the two bolts that hold the gear in place. 7. Reconnect the negative battery cable to the battery. 8. Close the hood.
Conclusion
Thank you for considering our product! The Cub Cadet Steering Gear is the best on the market and will provide you with many years of reliable service. If you have any questions or concerns, please do not hesitate to contact us.
