Most led tail light assemblies will come with one or two built in resistors for this purpose, but if your vehicle did not come equipped with them then you’ll need to purchase some separately and wire them in. The number and size of the resistors you’ll need will depend on the wattage of your particular LEDs and the desired brightness. For example, if you’re using 3 watt LEDs then you’ll generally need two 1 ohm resistors in parallel (per side).
If your goal is simply to make yourLEDs dimmer so they match the incandescent bulbs on the rest of your vehicle, then you can usually get away with using just one resistor per side.
Why Led Tail Light Resistor Is Necessary?
Best led tail light resistor is essential in ensuring that your car’s brake lights are working correctly. When you press the brakes, the resistor ensures that the current flowing to the bulb is regulated, so that the bulb doesn’t overheat and fail.
Our Top Picks For Best Led Tail Light Resistor
Best Led Tail Light Resistor Guidance
iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
If you’ve ever been driving and noticed that someone’s turn signal is blinking faster than normal, or if you’ve gotten a warning message on your dashboard telling you that there’s a problem with your turn signal, it might be because they’re using an LED bulb.
LED bulbs are becoming increasingly popular because they use less energy and last longer than traditional bulbs, but they can sometimes cause problems with turn signals and brake lights. That’s because they don’t have enough resistance, so they send too much power to the turn signal indicator or brake light.
That’s where iBrightstar’s 50W 6ohm Load Resistors come in. These resistors are designed to mimic the resistance of a traditional bulb, so they solve the problem of hyper flashing or malfunctioning turn signals and brake lights.
They’re easy to install, too. Just connect the wires with the splice taps provided, and you’re good to go. No wire cutting is necessary.
So if you’re looking for a way to keep your LED turn signals and brake lights from causing problems, iBrightstar’s 50W 6ohm Load Resistors are the perfect solution.
Common Questions on iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
• What is iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code?iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code are resistors that are used to fix LED bulbs that are flashing too fast.
• How do I install iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code?
Installation is easy, simply connect the resistor to the positive and negative wires of the LED bulb.
• What are the benefits of using iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code?
The benefits of using iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code are that they fix fast flashing LED bulbs and prevent error codes from being displayed.
Why We Like This
• Prevents hyper flashing or malfunctioning turn signals• Load resistors heat up like light bulbs• 4PCS quick wire clips included• One resistor required for each turn signal bulb• Easy installation with no wire cutting necessary
Additional Product Information
| Color | Gold |
| Height | 0.61 Inches |
| Length | 1.97 Inches |
| Weight | 0.05 Pounds |
Alla Lighting 3156 3157 Red LED Bulbs Super Bright 2835 39-SMD 12V Brake Stop Turn Signal Lights Taillights Replacement 3056 3057 4157 3047 4057 3457 for Cars, Trucks, Motorcycles
“Alla Lighting 3156 3157 Red LED Bulbs Super Bright 2835 39-SMD 12V Brake Stop Turn Signal Lights Taillights Replacement 3056 3057 4157 3047 4057 3457 for Cars, Trucks, Motorcycles. (Set of 2 W25x16q DF wedge base 3156/3157 red LED bulbs)
Alla Lighting improve your vehicle’s safety and style with our LED bulbs!Utilizing 39 pieces high quality,high power with high performance led chips per 3156 3157 LED bulb, Alla Lighting’s LED bulbs emit an extremely bright light output, 360 degree full angle illumination with projector lens design.
Compatible with both standard and CK / SRCK type, our LED bulbs are designed for easy plug-and-play installation – just twist to lock in place. No modifications or special wiring needed. And our LED bulbs have a lifespan of up to 50,000 hours.
3156 3157 led bulbs cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 30
Common Questions on Alla Lighting 3156 3157 Red LED Bulbs Super Bright 2835 39-SMD 12V Brake Stop Turn Signal Lights Taillights Replacement 3056 3057 4157 3047 4057 3457 for Cars, Trucks, Motorcycles
• What is the lumen output of the Alla Lighting 3156 3157 Red LED Bulbs?The lumen output of the Alla Lighting 3156 3157 Red LED Bulbs is 2500 lumens.
• What is the Wattage consumption of the Alla Lighting 3156 3157 Red LED Bulbs?
The wattage consumption of the Alla Lighting 3156 3157 Red LED Bulbs is 4 watts.
• What is the average life span of the Alla Lighting 3156 3157 Red LED Bulbs?
The average life span of the Alla Lighting 3156 3157 Red LED Bulbs is 50,000 hours.
• What is the beam angle of the Alla Lighting 3156 3157 Red LED Bulbs?
The beam angle of the Alla Lighting 3156 3157 Red LED Bulbs is 360 degrees.
• What is the color temperature of the Alla Lighting 3156 3157 Red LED Bulbs?
The color temperature of the Alla Lighting 3156 3157 Red LED Bulbs is 6000K.
Why We Like This
• 1. 39 pieces high quality, high power with high performance led chips per 3156 3157 LED bulb.• 2. 360 degree full angle illumination with projector lens design.• 3. Compatible with both standard and CK / SRCK type.• 4. 12V 148V, built in stable current IC driver for longer lifespan.• 5. Pure red. T25 base dual/single filament, non polarity.
Additional Product Information
| Color | Pure Red |
| Height | 0.3 Inches |
| Length | 2.1 Inches |
50W 6Ohm LED Load Resistors for 1157 BAY15D LED Turn Signal Lights (Fix Hyper Flash, Warning Cancellor) with 8pcs Quick Wire Clips, especially for 1157 White/Amber Switchback LED
If you’ve ever switched out your traditional incandescent bulbs for energy-saving LEDs, you may have noticed that your turn signal indicators start flashing faster than before – a phenomenon known as “hyper flashing” or “error code” messaging. This happens because LEDs use significantly less power than incandescents, and therefore trick your car’s flasher into thinking there’s a burned-out bulb somewhere in the system. The result is a rapid-fire blinking that’s not only annoying, but can also be confusing for other drivers on the road.
Fortunately, there’s an easy fix for this problem: LED load resistors. These little devices are designed to work with your LED turn signals, and simulate the power draw of a traditional incandescent bulb. This tricks your car’s flasher into thinking everything is normal, and the result is a steady, normal-speed blink.
Installing LED load resistors is a pretty simple process. First, use the included wire taps to splice the resistor leads onto the wires for your turn signal lights. You’ll need one resistor for each turn signal bulb. Once the wires are tapped, simply mount the resistors to a metal surface – they’ll get HOT when in use, so it’s important to
Common Questions on 50W 6Ohm LED Load Resistors for 1157 BAY15D LED Turn Signal Lights (Fix Hyper Flash, Warning Cancellor) with 8pcs Quick Wire Clips, especially for 1157 White/Amber Switchback LED
• What is the power rating of these load resistors?50W
• What is the resistance of these load resistors?
6 ohms
• What kind of LED lights are these load resistors compatible with?
1157 BAY15D LED turn signal lights
• What do these load resistors do?
They fix hyper flash and warning cancellor issues.
• How many load resistors are included?
8
Why We Like This
• Load Resistors for 1157(BAY15D) LED Turn Signal Light Fix• This will solve LED related turn signal lights problems, no flashing or burnt out bulb indications• Can work on any vehicle and can be connected across the turn signal bulbs to simulate the load of a regular filament bulb (2 Amp load)• With 13mm wire at each end of the resistor and T Taps• Just connect the wires with the Splice taps provided• No wire cutting is necessary• One LED resistor is required for each turn signal bulb• Load Resistors get really HOT when working• Mount it on metal surface, NOT plastic• Please don’t touch it when the LED light is on• We offer “2 Years” Warranty, replacement or refund• If you have any question about the Load Resistors, please feel free to contact us for help
Additional Product Information
| Color | golden |
| Height | 0.8661417314 Inches |
| Length | 1.968503935 Inches |
Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors
Hyper flash is a common problem with LED bulbs. It occurs when the bulb is not getting enough power from the vehicles electrical system. This can be caused by a number of things, but the most common cause is a bulb that is not getting enough power. The easiest way to fix this problem is to add a resistor to the circuit. This will increase the amount of power that the bulb gets, and will stop the hyper flashing.
Common Questions on Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors
• What are the dimensions of the Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors?The dimensions are 2.3 x 0.9 x 0.9 inches.
• What is the power output of the Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors?
The power output is 12 volts.
• What is the lifespan of the Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors?
The lifespan is 50,000 hours.
• What is the warranty of the Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors?
The warranty is 30 days.
• What is the price of the Syneticusa 3
Why We Like This
• 1. Error free• 2. Canbus ready• 3. No hyper flash• 4. Bright LED chips• 5. Full aluminum housing
Additional Product Information
| Color | red |
LivTee 4Pcs 50W 6ohm Load Resistors – Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
As all drivers know, it is important to keep your car in good working order. Part of that includes making sure your turn signals and brake lights are working properly. If you have ever added LED bulbs to your car, you may have noticed that they can sometimes cause the turn signals to hyper flash or trigger a warning message on the dashboard. This is due to the fact that LED bulbs use less power than traditional bulbs.
To fix this problem, you can install load resistors. These resistors mimic the power draw of a traditional bulb, tricking the car’s computer into thinking that the bulb is still there. This will stop the hyper flashing and allow your turn signals to work as normal.
Installation is easy – just connect the wires with the splice taps provided. No wire cutting is necessary. And with no more hyper flashing, you can drive with peace of mind knowing that your turn signals are working correctly.
Common Questions on LivTee 4Pcs 50W 6ohm Load Resistors – Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
• What are load resistors and what are they used for?Load resistors are devices that are used to connect in parallel with a circuit in order to provide a known resistance. This is often done to provide a current-limiting resistor for an LED circuit, or to provide a known resistance for a thermistor circuit.
• How do you connect load resistors in a circuit?
Load resistors are typically connected in parallel with the circuit that they are providing resistance for. This can be done by connecting the resistor leads to the positive and negative leads of the circuit, or by connecting the resistor across the circuit load (such as an LED).
• What value of resistor should be used in a given circuit?
The value of the resistor will depend on the desired resistance for the circuit. For example, if a 4kΩ resistor is desired, then a 4kΩ load resistor should be used.
• What are the consequences of using the wrong value load resistor in a circuit?
If the wrong value load resistor is used in a circuit, the circuit may not function as desired. For example, if a 4kΩ resistor is used in a
Why We Like This
• • Prevents LED turn signal lights or LED license plate lights from hyper flashing, malfunctioning, or trigger warning message on dashboard• Each package includes 4 load resistors and 4 quick wire clips• Load resistors heat up like light bulbs and get super HOT when working• Mount load resistors away from any wires or plastic• Easy installation with no wire cutting necessary
Benefits of Led Tail Light Resistor
Best led tail light resistor :
1. they are highly durable and last much longer than traditional bulbs.
2. they produce very little heat, so there is no risk of melting the plastic around them.
3. they use less energy, which means your battery willlast longer on each charge.
Buying Guide for Best Led Tail Light Resistor
When looking for the best led tail light resistor, there are a few things you will want to keep in mind. First, you need to find a resistor that is specifically designed for led lights. This will ensure that it can handle the high current that is required by led lights. Secondly, you want to find a resistor with a high wattage rating. This will help to prevent your lights from overheating and burning out. Finally, you want to find a resistor that is easy to install. You don’t want to have to spend hours installing a new one every time you want to change your lights.
Frequently Asked Question
What is a led tail light resistor?
A led tail light resistor is a device that is used to regulate the current in a led tail light.
What are the benefits of a led tail light resistor?
A led tail light resistor can help to prolong the life of your LED lights, as well as provide a brighter and more consistent light output. Additionally, they can help to reduce energy consumption by your vehicle’s tail lights.
How does a led tail light resistor work?
A led tail light resistor is used to ensure that the current running through the tail light is not too strong. This is important because if the current is too strong, it can damage the leds. The resistor helps to regulate the current so that the leds do not get damaged.
What are the best led tail light resistors on the market?
There are many led tail light resistors on the market. Some are better than others. Some are brighter, some are more durable, and some are more weather resistant.
How do I install a led tail light resistor?
In general, you will need to remove the old tail light assembly and then wire the new assembly in its place. If your vehicle does not have a factory-installed led tail light assembly, you will need to purchase one from an aftermarket supplier. Once you have the new assembly, follow the instructions that come with it to install it.
Conclusion
Thank you for your time, I hope I have convinced you to buy our product. It really is the best led tail light resistor on the market and will make your life much easier.
