Best Crown Vic Wheels: Bolt Pattern Guide

The Crown Victoria has a bolt pattern of 5 x 4.5 inches (127mm x 114.3mm). This means that there are five bolts spaced evenly around the circumference of the wheel, and that the distance between the center of any two adjacent bolts is 4.5 inches (114.3mm).

Why Crown Vic Wheel Bolt Pattern Is Necessary?

Crown vic wheel bolt pattern is necessary to ensure that the wheels are properly secured to the vehicle. Without the proper pattern, the bolts could come loose and allow the wheels to become unbalanced or fall off entirely. This would not only be dangerous for the driver and passengers, but it could also damage the vehicle itself.

A wheel bolt pattern is typically created by measurements taken from four points on a tire’s sidewall. The first measurement is taken from directly behind where the bead of the tire meets the rim. The second measurement is taken at a point directly above this first point. The third measurement is taken at a point directly below this second point. Finally,the fourth measurement should be equal to twicethe distance betweenthe first and second measurements plus or minus half an inch (1/2″).

Our Top Picks For Best Crown Vic Wheel Bolt Pattern

Best Crown Vic Wheel Bolt Pattern Guidance

Dorman 610-368 1/2-20 Serrated Wheel Stud – 0.627 In. Knurl, 1-31/32 In. Length Compatible with Select Models, 10 Pack

Check Price On Amazon

If you’re in need of some new wheel studs, trust Dorman’s OE replacement serrated wheel studs. Made from heat-treated carbon steel, they’re corrosion-tested and tensile-tested to ensure strength and durability. Plus, the studs undergo industry-standard proof-load testing to ensure they meet SAE standards.

Common Questions on Dorman 610-368 1/2-20 Serrated Wheel Stud – 0.627 In. Knurl, 1-31/32 In. Length Compatible with Select Models, 10 Pack

• What is the thread size of the Dorman 610-368 stud?
The stud has a 1/2-20 thread size.

• What is the knurl diameter of the Dorman 610-368 stud?
The stud has a 0.627″ knurl diameter.

• What is the overall length of the Dorman 610-368 stud?
The stud is 1-31/32″ long.

• Which models is the Dorman 610-368 stud compatible with?
The stud is compatible with select models.

• How many studs are included in a package?
There are 10 studs included in a package.

Why We Like This

• 1. Dorman 610 368 1/2 20 Serrated Wheel Stud is made of durable carbon steel that meets SAE automotive industry standards for strength and hardness.• 2. The wheel stud is corrosion tested with a 72 hour salt spray test that simulates three years of corrosion resistance.• 3. The lug stud undergoes industry standard proof load testing to ensure strength and trustworthiness.• 4. The Dorman 610 368 1/2 20 Serrated Wheel Stud is backed by a team of professional engineers and quality control specialists in the United States.• 5. Use the garage tool to ensure this part fits your exact vehicle by inputting your make, model and trim level.

Additional Product Information

Height 2.19 Inches
Length 3.62 Inches
Weight 0.1 Pounds

Dorman 939-108 17 x 7.5 In. Steel Wheel Compatible with Select Ford / Mercury Models, Black

Check Price On Amazon

A direct replacement for your old, damaged, or lost wheel, the Dorman 939-108 is a cost-effective solution that offers OE quality and appearance. Thoroughly tested to ensure reliable performance, this wheel is backed by a team of designers and engineers in the United States.

Common Questions on Dorman 939-108 17 x 7.5 In. Steel Wheel Compatible with Select Ford / Mercury Models, Black

• Is the Dorman 939-108 17 x 7.5 In. Steel Wheel Compatible with Select Ford / Mercury Models, Black easy to install?

Yes, the Dorman 939-108 17 x 7.5 In. Steel Wheel is easy to install. It is a direct replacement for your OEM wheel and does not require any modifications.

• What is the load capacity of the Dorman 939-108 17 x 7.5 In. Steel Wheel?

The Dorman 939-108 17 x 7.5 In. Steel Wheel has a load capacity of 1,650 lbs.

• What is the offset of the Dorman 939-108 17 x 7.5 In. Steel Wheel?

The offset of the Dorman 939-108 17 x 7.5 In. Steel Wheel is +45mm.

• What is the warranty on the Dorman 939-108 17 x 7.5 In. Steel Wheel?

The Dorman 939-108 17 x 7.5 In. Steel Wheel comes with a limited lifetime warranty.

Why We Like This

• 1. Direct replacement for a competitive price• 2. Thoroughly tested for quality and performance• 3. Original equipment quality• 4. Backed by a team of designers and engineers• 5. Fitment guaranteed

Additional Product Information

Color Multi
Height 16.42 Inches
Length 16.89 Inches
Weight 30 Pounds

1.5 in StanceMagic Hubcentric 5×4.5 Wheel Spacers (70.5mm Bore, 1/2×20 Studs) Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7-Black 5×114.3 Adapters, 2 Pack

Check Price On Amazon

The StanceMagic Hubcentric Wheel Spacer is the perfect way to fix clearance issues if your wheels are making contact with your shocks or brake calipers. By increasing the inner wheel well clearance, you can install wider rims/tires which will give your vehicle a more aggressive stance and improve handling characteristics and stability. The spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum and undergo an anodizing process to prevent surface corrosion and rust. They also include heat treated 109 grade steel studs and precised machined stud/nut threads to prevent cross threading.

For installation, the spacers require standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it’s your first time installing auto parts. After installation, be sure to torque lug nuts to manufacturer specifications and check and re-torque all hardware, including lug nuts securing adapter to wheel hub, after 25-50 miles.

Common Questions on 1.5 in StanceMagic Hubcentric 5×4.5 Wheel Spacers (70.5mm Bore, 1/2×20 Studs) Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7-Black 5×114.3 Adapters, 2 Pack

• What is the width of the StanceMagic Hubcentric 5×4.5 Wheel Spacers (70.5mm Bore, 1/2×20 Studs) Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7-Black 5×114.3 Adapters, 2 Pack?
The StanceMagic Hubcentric 5×4.5 Wheel Spacers (70.5mm Bore, 1/2×20 Studs) Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7-Black 5×114.3 Adapters, 2 Pack are 70.5mm wide.

• What is the bore size of the StanceMagic Hubcentric 5×4.5 Wheel Spacers (70.5mm Bore, 1/2×20 Studs) Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7-Black 5×114.3 Adapters, 2 Pack?
The bore size of the StanceMagic Hubcentric 5×4.5 Wheel Spacers (70.5mm Bore, 1/2×20 Studs) Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7-Black 5×114.

Why We Like This

• • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/1143 (5/45″) Bolt Pattern and 705mm Centerbore• Compatible with Ford 1994 2014 Mustang, 2007 2010 Edge, 1992 2011 Crown Victoria, 1983 2012 Ranger (Rear Hub), 1990 2010 Explorer (Rear Hub) & Sport Trac (Rear Hub)• Compatible with Lincoln 1984 1992 Mark 7, 1981 2011 Town Car• Also compatible with Mazda 1991 1994 Navajo, 1998 2001 B2500, 1994 2008 B3000, 1994 2010 B4000• May fit others, verify using spacer specifications

Additional Product Information

Color Black
Height 6 Inches
Length 7 Inches
Weight 6.75 Pounds

Forum Novelties Chatter Choppers – Chatter Teeth

Check Price On Amazon

Forum Novelties Chatter Choppers are the perfect way to liven up any party or event! These chatter teeth are sure to get everyone talking, and with their easy-to-use design, they’re also a breeze to put on and take off. Whether you’re looking to add some extra fun to your next costume or just want to make everyone laugh, these Chatter Choppers are sure to do the trick!

Common Questions on Forum Novelties Chatter Choppers – Chatter Teeth

• What are the dimensions of the Chatter Choppers – Chatter Teeth?
The Chatter Choppers – Chatter Teeth are 3.5″ x 2.5″ x 1.5″.

• How do you use Chatter Choppers – Chatter Teeth?
Place the Chatter Choppers – Chatter Teeth in your mouth and move your jaw up and down to create a chattering sound.

• What is the price of the Chatter Choppers – Chatter Teeth?
The Chatter Choppers – Chatter Teeth are $5.99.

• Where can I purchase the Chatter Choppers – Chatter Teeth?
The Chatter Choppers – Chatter Teeth can be purchased at most costume and party stores, as well as online.

Why We Like This

1. Chatter teeth are perfect for creating a comical or silly look.

2. They are easy to put on and take off.

3. Chatter teeth are made of durable materials and can withstand regular wear and tear.

4. They are affordable and a great value for the price.

5. Chatter teeth are sure to get a laugh out of everyone who sees them!

Additional Product Information

Color As Shown.
Height 1.2 Inches
Length 5.2 Inches
Weight 0.09 Pounds

KAX 5×4.5 Wheel Spacers, 2 Inch Adapter 82.5mm Center Bore, 1/2″ x20 Studs, Fit for Mustang 94-14, Ranger 82-12, Liberty 01-12, Town Car Explorer 91-19, Crown Victoria 92-11, Pack of 2

Check Price On Amazon

Bolt pattern: 5×45 Hub bore: 825mm Studs: 1/2″x20

KAX 5×4.5 Wheel Spacers are designed to give your vehicle a more aggressive look by extending the wheels outward. They also allow for large brake caliper installations or lifts/lowering kits. These spacers are made from the best true T 6 billet aluminum and feature heat-treated and hardened 109-grade bolts that are pre-installed. The anodized surface provides additional resistance to corrosion.

Common Questions on KAX 5×4.5 Wheel Spacers, 2 Inch Adapter 82.5mm Center Bore, 1/2″ x20 Studs, Fit for Mustang 94-14, Ranger 82-12, Liberty 01-12, Town Car Explorer 91-19, Crown Victoria 92-11, Pack of 2

• What is the load capacity of the KAX 5×4.5 Wheel Spacers?

The KAX 5×4.5 Wheel Spacers have a load capacity of 2200 lbs per pair.

• What is the lug pattern of the KAX 5×4.5 Wheel Spacers?

The KAX 5×4.5 Wheel Spacers have a 5×4.5″ lug pattern.

• What is the center bore diameter of the KAX 5×4.5 Wheel Spacers?

The KAX 5×4.5 Wheel Spacers have a 82.5mm center bore diameter.

• What vehicles are compatible with the KAX 5×4.5 Wheel Spacers?

The KAX 5×4.5 Wheel Spacers are compatible with Mustang 94-14, Ranger 82-12, Liberty 01-12, Town Car Explorer 91-19, Crown Victoria 92-11.

Why We Like This

• KAX wheel spacers are made from the best true T 6 billet aluminum, with heat treated and hardened 109 grade bolts pre installed• The anodized surface provides additional resistance to corrosion• Set of 4 high quality wheel adapters/spacers allow extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle• Wheel spacers also increase the vehicle’s performance in terms of handling and traction• Wheel spacers extend the wheels outward the vehicle giving it a more aggressive look, which also allows for large brake caliper installations or lifts/lowering kits

Benefits of Crown Vic Wheel Bolt Pattern

If you own a Crown Victoria, then you know how important it is to have the best possible wheel bolt pattern. This is because the Crown Victoria is a very heavy car and it needs all of the support that it can get when stationary. The best way to get this support is by using a wheel bolt pattern that distributes the weight evenly across all of the bolts. This will help to prevent any premature wear and tear on your suspension and axles, as well as making sure that your wheels are always properly supported.

Buying Guide for Best Crown Vic Wheel Bolt Pattern

:

The Ford Crown Victoria is a full-size sedan that was produced by Ford from 1992 to 2011. The Crown Victoria shared the Ford Panther platform with the Mercury Grand Marquis and Lincoln Town Car. It is the successor to the Ford LTD Crown Victoria and Mercury Marquis.

While there are many sedans on the market, the Crown Vic has a few features that make it stand out. One of these is its wheel bolt pattern. The Crown Vic uses a 5 x 4.5 inch bolt pattern, which is not very common. This means that finding wheels to fit your car can be tricky.

However, there are some aftermarket companies that make wheels specifically for the Crown Vic. These companies usually have a good selection of designs and finishes to choose from.

When you’re shopping for wheels, it’s important to keep in mind both the style of your car and the size of your tires. You’ll want to make sure that the wheels you choose will be able to accommodate both without any problems. Otherwise, you could end up with some major rubbing issues when you’re out on the road.

If you’re not sure what size tires you need, your best bet is to consult your owner’s manual or ask a professional at your local tire shop. Once you have this information, you’ll be able to narrow down your search for wheels and find a set that will look great on your car while still providing a smooth ride.

Frequently Asked Question

What is the best wheel bolt pattern for a Crown Victoria?

Some common wheel bolt patterns for the Crown Victoria include 5×114.3, 5×120, and 5×127.

What are the dimensions of a Crown Victoria wheel?

The dimensions of a Crown Victoria wheel are 17″x7″.

What is the offset of a Crown Victoria wheel?

The offset of a Crown Victoria wheel is 5.5 inches.

What is the weight rating of a Crown Victoria wheel?

The weight rating of a Crown Victoria wheel is 2,200 pounds.

What is the load index of a Crown Victoria wheel?

The load index of a Crown Victoria wheel is 120.

Conclusion

Thank you for considering our product. The best crown vic wheel bolt pattern is a great choice for your automotive needs. It is a top quality product that will give you many years of reliable service. Thanks again for your interest in our product.

Leave a Comment

Your email address will not be published. Required fields are marked *

Exit mobile version