Best Crankshaft Sprocket Removal Tool For The Money

There are many tools that can be used to remove a crankshaft sprocket, but the best tool for the job is the crankshaft sprocket removal tool. This tool is designed specifically for removing crankshaft sprockets, and it makes the job much easier than using a regular wrench or socket. The removal tool has a long, thin shaft with a hexagonal head that fits into the sprocket’s recess. The shaft is inserted into the sprocket and turned counterclockwise to loosen and remove it.

Why Crankshaft Sprocket Removal Tool Is Necessary?

A crankshaft sprocket removal tool is a specialized device that is used to remove the crankshaft sprocket from the engine. This tool is necessary because the crankshaft sprocket is held in place by a large nut that can be very difficult to remove without the proper tools. The removal tool consists of a long handle with a small claw on the end. The claw fits over the nut and allows for enough leverage to loosen and remove it.

Our Top Picks For Best Crankshaft Sprocket Removal Tool

Best Crankshaft Sprocket Removal Tool Guidance

EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001

Check Price On Amazon

EWK Camshaft Sprocket Puller Removal Tool Kit for VW Audi V6 V8 T40001 is a specialty tool designed to pull off the camshaft sprocket. It can be lock on gear with 5 or 6 spokes and the length of puller arm are 17mm and 23mm. The hex head 17mm pressure screw has a rounded end for reducing damage to sprocket.

This puller kit is a must have when replacing the timing belt on the Audi V-6 and V-8 engines. It safely dismantle camshaft sprockets with uniform pressure and replaces OEM part number T40001. The puller kit is heavy duty and can easily take off tough cam sprockets that are hard to loose without deforming, bending or spreading. It is placed in a sturdy blow molded case for storage and transportation convenience.

The puller kit is widely suitable for Audi: 80, 100, A4, A6, S6, A8, S8, RS4, RS6; Volkswagen: V6 24, 26, 27, 28 Petrol, V8 37, 42 Petrol; and Skoda: Superb. Please refer to the owner’s manual before using.

EWK

Common Questions on EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001

• What is the EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001?
The EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001 is a tool kit designed to remove camshaft sprockets on VW and Audi V6 and V8 engines.

• What are the benefits of using the EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001?
The benefits of using the EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001 include its ease of use and compatibility with a variety of VW and Audi models.

• How do I use the EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001?
To use the EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001, simply follow the instructions included in the kit.

Why We Like This

• Specialty Tool designed to pull off the camshaft sprocket• Can be lock on gear with 5 or 6 spokes• The length of puller arm are 17mm and 23mm• Hex head 17mm pressure screw with rounded end for reducing damage to sprocket• Heavy Duty and can deal with stubborn cams• Widely suitable for Audi, Volkswagen, and Skoda models• EWK Assurance with 12 months warranty

XiTuanYuan Universal Cam Pulley Holder Tool Kit Camshaft Wrench Injection Pump Sprocket Pulley Holding Tool (for GM/Ford/Nissan/Toyota/Volvo/Honda/Dodge/Ford/GM/Honda/Mazda)

Check Price On Amazon

This simple, clever tool kit is designed to make it easy to hold and work on camshafts and pulleys. The two holding tools in the kit have a wide range of applicability, making them compatible with Honda, Toyota, Ford, Dodge, GM, Chrysler, Audi, Mazda, Nissan, Land Rover, Volvo, and other models. The camshaft wrench has a maximum torque of 30 Newton meters. The camshaft holder can be used on models with sprocket holes greater than 12mm (1/2″) and with a hole spacing of 19mm to 190mm (3/4″ to 75″). The kit also includes a PVC handle which is anti-skid and easy to clean.

Common Questions on XiTuanYuan Universal Cam Pulley Holder Tool Kit Camshaft Wrench Injection Pump Sprocket Pulley Holding Tool (for GM/Ford/Nissan/Toyota/Volvo/Honda/Dodge/Ford/GM/Honda/Mazda)

• What are the dimensions of the product?

The product dimensions are 8.8 x 5.9 x 1.2 inches

• What is the weight of the product?

The weight of the product is 1.65 pounds.

• What is the maximum torque capacity of the product?

The maximum torque capacity of the product is 130nm/1500rpm.

• What is the warranty period of the product?

The warranty period of the product is 2 years.

• How many pieces are included in the set?

The set includes 1 piece.

Why We Like This

• Made of high quality alloy steel for durability• Oxygen treatment for rust and corrosion resistance• PVC handle for anti skid and easy cleaning• Long handle for extra leverage• Compatible with Honda, Toyota, Ford, Dodge, GM, Chrysler, Audi, Mazda, Nissan, Land Rover, and Volvo models

PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool Compatible with Harley Touring 2007-2019 Dyna 2006-2019 Models and All 2007-2021 Twin Cam Models

Check Price On Amazon

The PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool is a great way to keep your cam and crank sprockets in place while you work on your Harley Touring or Dyna model. This tool is made from high impact elastomer and will not scratch or mar your sprockets. It’s easy to use and comes with all the necessary hardware for a quick and easy installation.

Common Questions on PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool Compatible with Harley Touring 2007-2019 Dyna 2006-2019 Models and All 2007-2021 Twin Cam Models

• What is the purpose of the PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool?

The PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool is used to lock the cam sprocket in place while the crankshaft is being installed or removed.

• What models of Harley motorcycles is this tool compatible with?

The PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool is compatible with all 2007-2021 Twin Cam models, as well as Touring 2007-2019 and Dyna 2006-2019 models.

• How do you use this tool?

To use the PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool, simply insert it into the cam sprocket before installing or removing the crankshaft. Repeat this process five times with unique values.

Why We Like This

• 1. The PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool is compatible with Harley Touring models from 2007 to 2019, Dyna models from 2006 to 2019, and all 2007 to 2021 Twin Cam models.• 2. This locking tool is made from high impact elastomer and will not scratch or mar sprockets.• 3. The PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool is easy to use and comes with clear instructions.• 4. This locking tool is an essential tool for anyone doing work on their Harley Touring or Dyna model.• 5. The PLSUSJHAO TC96 Cam Sprocket Crank Shaft Locking Tool is a great value and an essential tool for anyone working on their Harley Touring or Dyna model.

Universal Camshaft Pulley Holder Tool Camshaft Pulley Removal Tool Cam Pulleys Holder Cam Sprocket Holding Tool Compatible with Dodge Audi Chrysler Ford GM Honda Mazda Nissan Toyota Volvo

Check Price On Amazon

The camshaft pulley holder tool is a great way to remove and install camshaft pulleys on your vehicle. This holder tool is made of high quality steel for durability, and it has a non-slip rubber grip for easy handling. The holder tool is designed to hold camshaft gears stationary, injection pump, other gears, and pulleys for both loosening and tightening cam pulley bolts. The holder tool is compatible with Dodge, Audi, Chrysler, Ford, GM, Honda, Mazda, Nissan, Toyota, Volvo models with sprocket holes larger than 12mm (1/2″) and hole separations from 19mm to 190mm (3/4″-75″).

Common Questions on Universal Camshaft Pulley Holder Tool Camshaft Pulley Removal Tool Cam Pulleys Holder Cam Sprocket Holding Tool Compatible with Dodge Audi Chrysler Ford GM Honda Mazda Nissan Toyota Volvo

• What is a Universal Camshaft Pulley Holder Tool?
A Universal Camshaft Pulley Holder Tool is a device used to remove and install camshaft pulleys on an engine.

• What are the benefits of using a Camshaft Pulley Removal Tool?

Camshaft Pulley Removal Tools can make it easier to remove and install camshaft pulleys, and can help to keep the pulleys in place while you work.

• What is a Cam Pulleys Holder?

A Cam Pulleys Holder is a device used to hold cam pulleys in place while you work on them.

• What is a Compatible with Dodge Audi Chrysler Ford GM Honda Mazda Nissan Toyota Volvo?

A Compatible with Dodge Audi Chrysler Ford GM Honda Mazda Nissan Toyota Volvo is a vehicle that can use a Universal Camshaft Pulley Holder Tool.

Why We Like This

• Durable and high quality steel build• Non slip rubber grip• Holds camshaft gears stationary• Injection pump compatible• Can loosen and tighten cam pulley bolts

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

Check Price On Amazon

This is a set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 30lt v6 and 50lt V8 petrol engines.

The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides.

Also included in the kit are the puller component’s required to remove the pulley without damage.

This is a must have for removing and installing for land rover jag crank pulley. The crankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.

Common Questions on Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

• What is the name of the tool required to remove the crankshaft pulley on a Jaguar Land Rover 3.0 V6?
Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

• What is the part number of the tool required to remove the crankshaft pulley on a Jaguar Land Rover 3.0 V6?
Part number 303-1437

• How many times should the process be repeated to remove the crankshaft pulley?
The process should be repeated five times.

Why We Like This

• Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 30lt v6 and 50lt V8 petrol engines• The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides• Also included in the kit are the puller component’s required to remove the pulley without damage• Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable• All tools have undergone rigorous engine testing, to ensure that the crankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools

Additional Product Information

Height 5.905511805 Inches
Length 9.842519675 Inches
Weight 15.43235834 Pounds

Benefits of Crankshaft Sprocket Removal Tool

A crankshaft sprocket removal tool is a versatile and essential tool for any serious do-it-yourself mechanic or automotive professional. This type of tool helps to remove the crankshaft sprocket without damaging the delicate inner workings of the engine.

The main benefit of using a crankshaft sprocket removal tool is that it makes the job much easier and less time consuming. Without this type of specialized tools, removing the crankshaft sprocket can be a real pain and could potentially damage other parts of the engine.

Another big plus with using atool like this is that it helps to prevent costly repairs down the road. By taking proper care when removingthe crankshaft sprockets, you can keep your engine in tip top shape and avoid havingto pay for expensive repairs later on.

Buying Guide for Best Crankshaft Sprocket Removal Tool

When it comes to removing a crankshaft sprocket, there are a few different approaches that can be taken. The best approach depends on the type of sprocket and the specific engine. For example, some sprockets are press-fit onto the shaft while others may be retaining-ringed or threaded-on.

Here are a few tips for choosing the best crankshaft sprocket removal tool for your needs:

1. Select a tool that is specifically designed for removing crankshaft sprockets. This will ensure that the tool is the appropriate size and shape for the job.

2. If possible, choose a tool that can be used with multiple types of sprockets. This will save time and effort if you need to remove more than one type of sprocket in the future.

3. Choose a durable tool that is built to last. This investment will pay off in the long run as you won’t have to replace your removal tool as often.

Frequently Asked Question

What is the best way to remove a seized or damaged crankshaft sprocket?

If the crankshaft sprocket is seized or damaged, the best way to remove it is to use a chisel and hammer to break it free. Once the sprocket is broken free, it can be removed by hand.

What are some of the risks associated with removing a crankshaft sprocket?

Some of the risks associated with removing a crankshaft sprocket include damaging the crankshaft, damaging the sprocket, and throwing off the timing of the engine.

What are some of the common causes of crankshaft sprocket failure?

A crankshaft sprocket can fail for a number of reasons, including: 1. Worn or damaged teeth on the sprocket2. Worn or damaged bearings in the sprocket3. A broken sprocket shaft4. A broken crankshaft

What are some tips for avoiding damage to the crankshaft during removal?

Some tips for avoiding damage to the crankshaft during removal are to use the proper tools, to be careful when removing the crankshaft, and to avoid using too much force.

What are some of the most popular crankshaft sprocket removal tools on the market?

There are a few different crankshaft sprocket removal tools on the market, but the most popular ones are the ones that are specifically designed for removing crankshaft sprockets. These tools typically have a long handle that allows for plenty of leverage, and they also have a sharp, serrated edge that helps to grip the sprocket so it can be removed without slipping.

Conclusion

Thank you for your time. I hope I have convinced you that the best crankshaft sprocket removal tool is the perfect tool for your needs. It will make your work easier and faster, and it will last for a long time.

Leave a Comment

Your email address will not be published. Required fields are marked *

Exit mobile version