Best Carrier Hot Surface Ignitor: How To Choose The Right One

A hot surface ignitor (HSI) is a device used to ignite gas-fueled appliances. It consists of a coil of resistance wire mounted on an insulating base. The ignitor is placed in contact with the gas burner. When electric current flows through the coil, it produces heat that ignites the gas.

HSIs are used in a wide variety of appliances, including furnaces, boilers, water heaters, and ovens. They are often used in applications where a pilot light would be impractical or unsafe, such as in sealed combustion systems.

There are several different types of HSI available, each with its own advantages and disadvantages. The best type of HSI for a particular application depends on the operating conditions and the requirements of the appliance.

Why Carrier Hot Surface Ignitor Is Necessary?

A hot surface ignitor is a component in many gas furnaces that ignites the fuel as it enters the combustion chamber. The best carrier hot surface ignitor is made from high-quality materials that can withstand high temperatures and last for many years. Many homeowners choose to replace their furnace’s original igniter with a carrier model because of its reputation for reliability.

Our Top Picks For Best Carrier Hot Surface Ignitor

Best Carrier Hot Surface Ignitor Guidance

Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004

Check Price On Amazon

The Furnace Hot Surface Ignitor is a direct replacement for the Carrier Bryant Payne OEM Part LH33ZS004. This model number is CECOMINOD002711. The item package dimensions are 6099999993778 inches long, 3099999996838 inches wide, and 3099999996838 inches high. This is a replacement hot surface ignitor for furnaces. It is made of silicon nitride and is used in Carrier, Bryant, and Payne furnaces that require this part.

Common Questions on Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004

• What is the Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004?
The Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004 is a replacement part for your furnace.

• Why would you need to replace your furnace hot surface ignitor?
If your furnace is not igniting properly, the hot surface ignitor may need to be replaced.

• How do you know if the Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004 is the right part for my furnace?
Carrier Bryant Payne OEM Part LH33ZS004 is the right part for your furnace if the original hot surface ignitor on your furnace is no longer working.

• Where can I find the Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004?
The Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004 can be found at most hardware stores.

Why We Like This

• • 1. This is a direct replacement for the Carrier Bryant Payne OEM part LH33ZS004.• 2. It is model number CECOMINOD002711.• 3. The item package length is 6099999993778″.• 4. The item package width is 3099999996838″.• 5. The item package height is 3099999996838″.

Additional Product Information

Color Original Version
Height 6 Inches
Length 6 Inches
Weight 0.2 Pounds

Duralight Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004

Check Price On Amazon

A hot surface ignitor (HSI) is a device used in gas furnaces to ignite the fuel. The HSI consists of a ceramic element that is heated by an electrical current to a high temperature. When the HSI comes into contact with the gas, the gas is ignited.

The Duralight Furnace Hot Surface Ignitor is a direct replacement for the Carrier Bryant Payne OEM part LH33ZS004. It is made in the USA and comes with a two-year warranty. This direct replacement part is compatible with many Carrier, Bryant, Payne, and Day models. It includes two hi-temp ceramic wire nuts.

Common Questions on Duralight Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004

• What is the replacement part number for the Carrier Bryant Payne OEM Part LH33ZS004?
Duralight Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004 is the replacement part number.

• What is the function of a hot surface ignitor?
A hot surface ignitor is a component of a gas furnace that ignites the fuel when the furnace is turned on.

• Why might you need to replace the hot surface ignitor in your furnace?
If the hot surface ignitor in your furnace is not working, the furnace will not be able to ignite the fuel and will not work.

• How do you know if the hot surface ignitor in your furnace needs to be replaced?
One way to tell if the hot surface ignitor in your furnace needs to be replaced is if the furnace is not igniting the fuel when it is turned on. Another way to tell is if the hot surface ignitor is glowing but the furnace is not igniting the fuel.

Why We Like This

• • 1. Direct replacement for Carrier, Bryant, Payne, and Day furnaces• 2. Two year warranty• 3. Made in the USA• 4. Hi temp ceramic wire nuts included• 5. Replaces LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004

Carrier Products LH33ZG001 – Hot Surface Ignitor

Check Price On Amazon

A hot surface ignitor (HSI) is a device used to ignite gas fuels. The ignitor is usually made of ceramic, quartz, or other heat-resistant materials and is heated by electrical resistance. The hot surface ignitor is used in gas furnaces, boilers, and water heaters to ignitor the gas fuel as part of the combustion process.

HSI technology has been used for over 50 years and is the most common ignitor type used in North America. HSI ignitors are more dependable than pilot lights and provide faster heat-up times. They are also more energy efficient because they only use electricity when the ignitor is heating up, not while it is maintaining a pilot light.

If you have a gas furnace, boiler, or water heater that uses an HSI, it is important to keep the ignitor clean and free of debris. A dirty or blocked ignitor can prevent the gas from igniting, which can cause the unit to shut down or fail to operate properly.

Common Questions on Carrier Products LH33ZG001 – Hot Surface Ignitor

• What is the dimensions of the Carrier Products LH33ZG001 – Hot Surface Ignitor?
The dimensions are 3.5″ x 3.5″ x 1″.

• What is the weight of the Carrier Products LH33ZG001 – Hot Surface Ignitor?
The weight is 6.4oz.

• What is the voltage of the Carrier Products LH33ZG001 – Hot Surface Ignitor?
The voltage is 120v.

• What is the current of the Carrier Products LH33ZG001 – Hot Surface Ignitor?
The current is 3.6A.

• What is the order quantity of the Carrier Products LH33ZG001 – Hot Surface Ignitor?
The order quantity is 1.

Why We Like This

1. The Carrier Products LH33ZG001 Hot Surface Ignitor is a reliable and durable ignitor that is designed for use with a variety of Carrier furnaces.

2. The ignitor is easy to install and replace, and it features a durable construction that can withstand the rigors of regular use.

3. The ignitor is designed to provide a consistent and reliable ignition source for your furnace, and it will help to ensure that your furnace operates at peak efficiency.

4. The ignitor is backed by a one year warranty, and it is UL listed for safety and quality assurance.

5. The Carrier Products LH33ZG001 Hot Surface Ignitor is an affordable and effective ignitor that will keep your furnace running reliably and efficiently for years to come.

OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor

Check Price On Amazon

A hot surface ignitor is a device that is used to ignition fuel in a furnace or other type of combustion system. The ignitor consists of a ceramic element that is heated by an electric current. When the element reaches a high enough temperature, it will ignite the fuel.

Hot surface ignitors are used in many different types of combustion systems, including furnaces, boilers, and water heaters. The ignitors are designed to operate in a wide range of temperatures and can withstand many wear and tear cycles.

Common Questions on OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor

• What is the model number of the Carrier Bryant Hot Surface Ignitor?
The model number is OWACLIQ LH33ZG001.

• What is the purpose of the Carrier Bryant Hot Surface Ignitor?
The Carrier Bryant Hot Surface Ignitor is used to ignite the gas in a furnace.

• How does the Carrier Bryant Hot Surface Ignitor work?
The Carrier Bryant Hot Surface Ignitor produces a spark that ignites the gas in the furnace.

• What are the benefits of using the Carrier Bryant Hot Surface Ignitor?
The Carrier Bryant Hot Surface Ignitor is a reliable and efficient way to ignite the gas in a furnace.

• How often should the Carrier Bryant Hot Surface Ignitor be replaced?
The Carrier Bryant Hot Surface Ignitor should be replaced every three to five years.

Why We Like This

1. The OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor is a high quality replacement ignitor that is designed to last.

2. It features a durable construction that can withstand the high temperatures of your furnace.

3. This ignitor is easy to install and comes with detailed instructions.

4. The OWACLIQ LH33ZG001 Carrier Bryant Hot Surface Ignitor comes with a one year warranty.

5. It is an affordable replacement ignitor that will keep your furnace running efficiently.

Carrier Hot Surface Ignitor, Fits Brand Carrier LH33ZG001-1 Each

Check Price On Amazon

A carrier hot surface ignitor is a device that is used to light the burner in a furnace. The ignitor itself is a small ceramic rod that is heated by an electric current. When the ignitor gets hot enough, it will glow, and this glow is what ignites the gas.

The ignitor is an important part of the furnace, because it is the part that starts the combustion process. Without the ignitor, the furnace would not be able to heat your home.

The hot surface ignitor is a relatively new invention. Prior to the invention of the hot surface ignitor, furnaces used a pilot light to ignite the gas. The pilot light was a small flame that was kept lit all the time. The problem with the pilot light was that it could go out, and when it did, the furnace would not work.

The hot surface ignitor solves this problem because it does not have a flame that can go out. The ignitor is heated by an electric current, and as long as the current is flowing, the ignitor will be hot.

If your furnace has a hot surface ignitor, it is important to keep an eye on it and make sure that it is working properly. If

Common Questions on Carrier Hot Surface Ignitor, Fits Brand Carrier LH33ZG001-1 Each

• What is a Carrier Hot Surface Ignitor?
A Carrier Hot Surface Ignitor is a device that ignites the gas in a furnace. It consists of a ceramic element that gets very hot when electricity is passed through it.

• What are the dimensions of a Carrier Hot Surface Ignitor?

The dimensions of a Carrier Hot Surface Ignitor vary depending on the model, but they are typically small and compact.

• How does a Carrier Hot Surface Ignitor work?

Carrier Hot Surface Ignitors work by heating up a ceramic element to a very high temperature. This high temperature then ignites the gas in the furnace, which starts the heating process.

• Where can I find a Carrier Hot Surface Ignitor?

Carrier Hot Surface Ignitors can be found at most hardware stores or online retailers that sell furnace parts.

• How much does a Carrier Hot Surface Ignitor cost?

Carrier Hot Surface Ignitors typically cost between $20 and $30.

Why We Like This

1. The Carrier Hot Surface Ignitor is a necessary component for your Carrier furnace.
2. This product fits the Carrier LH33ZG001 1 model.
3. The ignitor is made of durable materials that will last for many years.
4. The hot surface ignitor is easy to install and is a cost effective way to keep your furnace running efficiently.
5. This product comes with a one year warranty.

Additional Product Information

Height 2.3 Inches
Length 4.2 Inches
Weight 0.01 Pounds

Benefits of Carrier Hot Surface Ignitor

When it comes to your home’s comfort, you want the best for your family. A carrier hot surface ignitor is an important part of your furnace, and it’s responsible for igniting the fuel that heats your home. Here are some benefits of owning a carrier hot surface ignitor:

1) They’re more energy-efficient than traditional furnaces.

2) They provide even heating throughout your home.

3) They operate quietly, so you won’t even know they’re there.
importantly, 4) They improve the indoor air quality in your home by circulating fresh air from outside.

Buying Guide for Best Carrier Hot Surface Ignitor

A good carrier hot surface ignitor will have a few key features that set it apart from the competition. First, it should be made from durable materials that can withstand high temperatures. It should also be easy to install and come with clear instructions. Finally, it should be able to provide a reliable spark to ignite the gas in your furnace.

Frequently Asked Question

What are the best carrier hot surface ignitors?

There are many different types of hot surface ignitors, so it really depends on what you are looking for. Some of the more popular brands include Honeywell, White-Rodgers, and Carrier.

What are the benefits of using a hot surface ignitor?

There are many benefits to using a hot surface ignitor: 1. Hot surface ignitors provide a more reliable ignition source than a pilot light. If a pilot light goes out, the ignitor can provide the spark needed to re-light it. 2. Hot surface ignitors are less likely to cause a fire than a pilot light. If a pilot light goes out and is not relit quickly, the gas can build up and cause a dangerous explosion. 3. Hot surface ignitors provide a more consistent flame, which can result in better heating performance. 4. Hot surface ignitors do not require a constant supply of electricity, so they can be used in areas where power outages are common.

What are some of the features of hot surface ignitors?

Some of the features of hot surface ignitors include being able to handle high temperatures, being durable, and being able to ignite a variety of fuels.

How does a hot surface ignitor work?

A hot surface ignitor is a type of ignitor that uses a glowing metal wire to ignite a gas burner. The wire is heated by an electric current and glows red hot. When the gas burner is turned on, the hot wire ignites the gas.

Why is a hot surface ignitor often used instead of a glow ignitor?

A hot surface ignitor is often used instead of a glow ignitor because it can provide a more consistent and reliable ignition source. Hot surface ignitors can also operate at higher temperatures, which can be beneficial in some applications.

Conclusion

Thank you for your time. Based on what we discussed, I believe the best carrier hot surface ignitor is the right choice for you. It is a reliable and affordable product that will keep your family safe and comfortable.

Leave a Comment

Your email address will not be published. Required fields are marked *

Exit mobile version