A wheel bearing puller set is an essential tool for any mechanic or do-it-yourselfer looking to properly remove and replace wheel bearings. This set of tools is designed to make the job easier, allowing you to quickly and accurately extract the bearing from the hub assembly and replace it. With its precision design and robust construction, this set of tools will give you the confidence to tackle any job with ease. Whether you are a novice or an experienced professional, this puller set will help you get the job done right every time.
Why Wheel Bearing Puller Set Is Necessary?
Wheel bearing puller sets are necessary for safely and efficiently removing wheel bearings from a vehicle. The puller set will include the appropriate tools needed to safely remove the bearing, such as a special puller, spacers, and screws. If a wheel bearing is not properly removed using the correct tools it can cause damage to the surrounding components or even lead to an accident if not done correctly. Using a wheel bearing puller set ensures that the job is done correctly and safely.
Comperision Chart for wheel bearing puller set
Orion Motor Tech Wheel Bearing Press Kit for Front Wheel Drive Bearing Removal & Installation, 24pc Wheel Bearing Puller Tool Set with Sliding Screws Universal Bushings Sleeves Storage Case
Bonvoisin 15T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums
OMT 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit
Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS
OMT Bearing Puller Set, 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2″ and 3″ Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit with Case
Orion Motor Tech Wheel Bearing Press Kit for Front Wheel Drive Bearing Removal & Installation 24pc Wheel Bearing Puller Tool Set with Sliding Screws Universal Bushings Sleeves Storage Case
The Orion Motor Tech Wheel Bearing Press Kit is an invaluable tool for any mechanic or DIYer looking to easily and quickly remove and install wheel bearings. The kit includes two 8.8 grade sliding screws with precision threading, multiple sleeves and bushings in most common sizes to work with nearly any front wheel drive automobile or light truck, made of premium stainless steel for superior strength and corrosion resistance, and comes in a handy blow-molded storage case. With this kit, you can be sure that your wheel bearings will be securely held in place without damaging the steering knuckle or strut assembly.
Why We Like This
Universal Compatibility: Works with many automobiles or light trucks, foreign or domestic
Quick & Easy Operation: Securely holds bearings without damage to other components
Durable Construction: Made of stainless steel for long-lasting service
Compact & Portable: Comes in a handy storage case
24 Piece Set: Contains everything you need for bearing removal & installation
Common Questions & Answers
Q: Is this suitable for small cars?
A: Yes, the kit contains multiple sleeves and bushings in most common sizes so it should work with nearly any front wheel drive automobile or light truck.
Q: Does it come with instructions?
A: Yes, the kit comes with detailed instructions on how to properly remove and install wheel bearings.
Q: How durable is the construction?
A: The sliding screws are heat treated and blackened for superior strength and corrosion resistance while the rest is made of premium stainless steel so it should provide you with dependable long-lasting service.
Additional Product Information
| Height | 12.2 |
| Length | 17.72 |
| Weight | 24.030386558 |
| Width | 4.13 |
Bonvoisin 15T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums
If youre looking for a reliable and powerful hydraulic gear puller, then the Bonvoisin 15T Hydraulic Gear Puller Set is a great choice. This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine and comes with three or two jaws that can be easily interchanged. It is perfect for removing wheel bearings, brake drums, sprockets, rotors, car axles, shafts and pulleys. It is also great for railway vehicle, factory machinery and mining equipment maintenance.
Why We Like This
No Oil Leakage The hydraulic puller is forged with high-quality steel and cast in one piece so there are no sealing rings needed and no oil leakage.
Interchangeable Jaws The three or two jaws can be easily interchanged which makes it more flexible to operate.
Complete Accessories This 3 in 1 bearing puller set comes with all the necessary accessories including a hydraulic cylinder, handle, jaws, pulling tabs, screws, spring thimble and a pull ring.
Wide Applications The bearing separator can be used for many different tasks such as removing wheel bearings or brake drums from cars or maintenance on railway vehicles.
Warranty Within one year of purchase if something goes wrong with the hydraulic puller you can replace it for free.
Common Questions & Answers
Q: Is this product easy to use?
A: Yes! This product is very easy to use as it comes with interchangeable jaws that make it more flexible to operate.
Q: What type of materials is this product made from?
A: This product is made from high-quality steel which makes it strong and durable.
Q: Does this product come with a warranty?
A: Yes! Within one year of purchase if something goes wrong with the hydraulic puller you can replace it for free.
Additional Product Information
| Size | 15T |
OMT 9-Way Slide Hammer Puller Set Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit
Are you in need of a versatile puller set? Look no further than the Orion Motor Tech 9-Way Slide Hammer Puller Set with 4 lb slide hammer. This puller set is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
The Orion Motor Tech 9-Way Slide Hammer Puller Set comes with 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. Plus 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs. It is also built to last with rugged carbon steel alloy and chrome vanadium steel components which can withstand accidental drops and years of heavy use without cracking or rusting.
Whats more, this product includes detailed parts diagram and step-by-step instructions to simplify tough jobs like the piston wind-back process. Moreover it comes with a 1 year warranty as well as 100% free exchange if the product is defective. It also has a protective carrying case to extend the life of your tools.
Why We Like This:
Versatile puller set ideal for a variety of applications
Includes 2 & 3 jaw pullers for internal & external work
Built to last with rugged carbon steel alloy & chrome vanadium steel components
Detailed parts diagram & step by step instructions included
1 year warranty & 100% free exchange if product is defective
Common Questions & Answers:
Q1: What kind of tool is this?
A1: This is a 9 way slide hammer puller set with 4 lb slide hammer designed for various pulling applications including flange type rear axles and front wheel drive hubs.
Q2: What kind of material is it made from?
A2: Its made from rugged carbon steel alloy and chrome vanadium steel components which can withstand accidental drops and years of heavy use without cracking or rusting.
Q3: Does it come with warranty?
A3: Yes it does! It includes a 1 year warranty as well as 100% free exchange if the product is defective.
Additional Product Information
| Height | 4.72 |
| Length | 23.62 |
| Width | 8.66 |
| Size | 18 pieces |
Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS
The Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit is the perfect tool set for anyone looking to remove bearings, axles, and bushings with ease. This 16-piece set comes with a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets that can work on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
These wheel bearing removal tools are made of AISI 1045 medium carbon steel for long-term durability under even punishing use. The collets are chromoly steel which makes it capable of removing even the most stubborn blind bearings and bushings without trouble. It is suitable for use on a wide variety of vehicles without damaging the removed parts.
Using this internal bearing puller set is easy. For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer’s weight back to easily knock out the bearing or bushing. For tighter or more delicate operation, you can slowly tighten the counterstay to more carefully extract the part. It also comes with a custom blow-molded case that keeps everything organized and easy to carry or store if needed.
Why We Like This
16-piece set: Includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets that can work on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
Heavy-duty construction: Made of AISI 1045 medium carbon steel for long-term durability under even punishing use. The collets are chromoly steel which makes it capable of removing even the most stubborn blind bearings and bushings without trouble.
Wide application: Suitable for use on a wide variety of vehicles without damaging the removed parts.
Easy to use: Fit the appropriate collet into the inner race, then pull back on the slide hammer’s weight to easily knock out the bearing or bushing; for tighter or more delicate operation you can slowly tighten the counterstay to extract it safely.
Blow molded case: Comes with a custom blow-molded case that keeps everything organized and easy to carry or store as needed.
Common Questions & Answers
Q: What is this tool set?
A: This is Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit which contains 16 pieces including a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets that can work on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
Q: What materials are these tools made of?
A: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; The collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
Q: How do I use this internal bearing puller set?
A: For most parts just fit the appropriate collet into the inner race then pull back on Slide Hammer’s weight back easily knock out bearing or bushing; For tighter or more delicate operation you can slowly tighten counterstay extract part safely
Additional Product Information
| Height | 4.72 |
| Length | 18.5 |
| Weight | 11 |
| Width | 12.59 |
| Size | 16pcs |
OMT Bearing Puller Set 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2 and 3 Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit with Case
Are you a professional mechanic or a home enthusiast looking for an efficient and dependable bearing puller set? Look no further! The OMT Bearing Puller Set is the perfect tool kit for you. This versatile set features two bearing separator jaws with a capacity of 5 tons, making it suitable for use with most vehicles, ATVs, and light trucks.
The set also includes a 3″ bearing separator jaw, 2″ bearing separator jaw, 6″ yoke, 6-1/4″ forcing screw, four 4″ extension screws, four 5″ extension screws, and two 4-1/2″ L-type legs. It is constructed from heat treated Cr-V steel with a black oxide finish to ensure corrosion resistance and long term durability.
The knife like taper feature on the jaws allows you to get behind bearings to securely grip any bearing. With the included tools you can reach and remove bearings in tight spaces effectively. This pinion bearing puller set makes it easier than ever to complete a wide range of pulling jobs from large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels.
Why We Like This:
Versatile bearing puller that can be used for large or small bearings
Includes 2 bearing splitter jaws with 5 ton capacity
Knife like taper feature allows the jaws to get behind bearings to securely grip any bearing
Constructed from heat treated Cr-V steel with black oxide finish for corrosion resistance
Includes tools to enable you to reach and remove bearings in tight spaces effectively
Common Questions & Answers:
Q: What type of vehicles is this tool kit compatible with?
A: This tool kit is compatible with most vehicles including ATVs and light trucks.
Q: What materials are used in the construction of this tool kit?
A: This tool kit is constructed from heat treated Cr-V steel with black oxide finish for corrosion resistance.
Q: How many pieces are included in this tool kit?
A: This OMT Bearing Puller Set includes 3bearing separator jaw, 2bearing separator jaw, 6yoke, 6-1/4forcing screw, four 4extension screws, four 5extension screws and two 4-1/2L-type legs.
Additional Product Information
| Height | 9.45 |
| Length | 14.96 |
| Weight | 0.000625 |
| Width | 2.55 |
| Size | 14-Piece, Universal |
Benefits of Wheel Bearing Puller Set
1. Easy Installation: A wheel bearing puller set will make replacing your wheel bearings much easier and faster. The tools are designed to quickly and safely remove old bearings and install new ones, allowing you to do the job quickly and efficiently.
2. Increased Safety: Wheel bearing puller sets are designed to provide a secure grip on the bearing when removing it, meaning that you wont have to worry about damaging the parts or yourself in the process. This increased safety makes them a great choice for DIY mechanics.
3. Cost Savings: Replacing your wheel bearings yourself with a wheel bearing puller set can save you time and money compared to taking it to a professional mechanic. Its an easy job that anyone can do with minimal tools and knowledge, making it a great option for those who want to save some cash on their repairs.
4. Versatility: Depending on the type of puller set you choose, you may be able to use it on a variety of different vehicles and applications, including cars, trucks, ATVs, tractors, etc., which makes them an excellent choice for those who work on multiple different types of vehicles or need something that can be used for multiple different jobs.
Buying Guide for wheel bearing puller set
Types of Wheel Bearing Puller Sets
Wheel bearing pullers come in a variety of sizes and types, depending on the size and type of wheel bearing that needs to be removed. The most common type is a three-jaw puller, which uses three legs attached to a center bolt to pull the bearing off the wheel hub. Other types include two-jaw pullers, slide hammer pullers, and speciality sets that are designed for specific applications.
Components of a Wheel Bearing Puller Set
A wheel bearing puller set typically includes all the necessary components to remove a wheel bearing from its hub. It usually comes with a set of arms that attach to the center bolt, as well as pins or wedges used to secure the arms in place. Most sets also include an assortment of bolts, nuts, and other hardware needed for different applications.
Considerations When Buying a Wheel Bearing Puller Set
When buying a wheel bearing puller set it is important to consider the size and type of wheel bearing that needs to be removed as well as the type of vehicle it is being used on. It is also important to make sure that all components are included in the set and that they are compatible with each other. Additionally, some sets may include additional accessories such as adapters or extension bars for more difficult jobs.
Cost
The cost of wheel bearing puller sets vary depending on brand, quality and size. In general, they range from around $30-$100 USD for basic sets up to $300-$400 USD for more specialized sets with additional components or accessories.
The wheel bearing puller set is an effective and efficient way to remove wheel bearings. It is an essential tool for any mechanic and should be kept on hand at all times. The set includes various components which allow for the safe and easy removal of wheel bearings without damaging the vehicle or bearing. With proper use, this tool can save time, money, and effort when servicing vehicle wheels.
