Wakeboard tower mounting feet are an essential part of any wakeboarder’s setup, allowing them to secure their tower firmly and safely. With the right mounting feet in place, wakeboarders can get the most out of their equipment and enjoy an enhanced experience on the water. In this introduction, we will discuss the importance of choosing the correct mounting feet for your wakeboard tower, as well as the complexities that come with balancing perplexity and burstiness when selecting a set of feet. We will also provide some tips on how to ensure you get a secure and safe installation for your wakeboarding needs.
Why Wakeboard Tower Mounting Feet Is Necessary?
Wakeboard tower mounting feet are necessary to ensure a secure and stable connection between the tower and the boat. The feet provide a wide and even surface area for the tower to rest on, helping to spread out the load from the tower evenly. This helps to prevent any damage or stress on the hull of the boat, as well as providing a safe and secure attachment for riders. Additionally, mounting feet help protect the underside of the boat from potential scratches or scrapes if it comes into contact with sharp edges of the wakeboard tower.
Comperision Chart for wakeboard tower mounting feet
Krypt Wakeboard Tower Feet Kit, Mounting Hardware Fits Most Towers Tubing, Mounts are Polished Aluminum, Hardware is Stainless Steel, Kit Includes 4 Complete Mounting Feet, Backing Plates, Rubber Pads
Krypt Towers Origin Catapult Universal Wakeboard Boat Tower (Polished)
Pair Kicker 45KM84L 8″ 600 Watt Marine Boat Waterproof Speakers w/LED’s KM8 Bundle with Rockville DMAC80B Dual 7.7″ Black Aluminum Wakeboard Tower Speaker Enclosure
Reborn Tower Launch Reverse Arch Universal Wakeboard Boat Tower – Fits Boats with Beams 78″ – 106″ – Easily Folds Down – Seamless 2.25inch 6063 Aircraft Aluminium Tubing (Black)
Krypt Wakeboard Tower Feet Kit Mounting Hardware Fits Most Towers Tubing, Mounts are Polished Aluminum, Hardware is Stainless Steel, Kit Includes 4 Complete Mounting Feet, Backing Plates, Rubber Pads
Do you want to upgrade your wakeboard tower with a set of feet kit? The Krypt Wakeboard Tower Feet Kit is the perfect solution. This kit features mounting hardware that fits most towers, polished aluminum mounting feet, and stainless steel hardware for a sleek and modern look. The kit includes four complete feet, backing plates, and rubber pads for a secure installation.
Why We Like This
Polished aluminum feet provide a sleek and modern look.
Stainless steel hardware ensures a secure installation.
Includes four complete feet, backing plates, and rubber pads for easy installation.
Fits most wakeboard towers for convenience.
Sleek design adds style to any wakeboard tower setup.
Common Questions & Answers
Q: Does the Krypt Wakeboard Tower Feet Kit include all necessary mounting hardware?
A: Yes, the Krypt Wakeboard Tower Feet Kit includes all necessary mounting hardware such as four complete feet, backing plates, and rubber pads.
Q: Is the Krypt Wakeboard Tower Feet Kit compatible with most wakeboard towers?
A: Yes, the Krypt Wakeboard Tower Feet Kit is designed to fit most wakeboard towers for convenience.
Q: What material are the feet made of?
A: The feet are made of aircraft-grade 6061 CNC polished aluminum for a sleek and modern look.
Additional Product Information
Big Air Cuda Tower (Black Powder Coat)
The Big Air Cuda Tower is the perfect addition to any boat. This tower offers universal fit, accommodating boats 72″ – 103″ wide and features a sleek black powder coat finish. The aluminum tubing is 2.25″ in diameter and fully collapsible, making it easy to store when not in use. It also includes built-in mounts to quickly accept our Razor Series rack line, so you can easily accessorize your boat as needed. With this tower, you’ll be able to take your boat trips to the next level!
Why We Like This
Universal Fit – Accommodates boats 72″ – 103″ wide with approximately 39 inches between front and back mounts
Gloss Black Powder Coat finish for an eye-catching aesthetic
2.25″ large diameter – flex reducing aluminum tubing fully collapsible to approximately 26″ height
Built-in mounts allow for quick acceptance of Razor Series rack line
TOWER ONLY; all accessories sold separately
Common Questions & Answers
Q: Is this product easy to install?
A: Yes! This product is designed for quick and easy installation.
Q: Does this product come with accessories?
A: No, this product is only the tower itself; all accessories must be purchased separately.
Q: What size boats will this tower fit?
A: This tower fits boats 72 – 103 wide.
Additional Product Information
| Weight | 84 |
| Size | Fits 72″ – 103″ wide |
Krypt Towers Origin Catapult Universal Wakeboard Boat Tower (Polished)
The Krypt Towers Origin Catapult Universal Wakeboard Boat Tower (Polished) is a great wakeboard tower for boats between 17-24 feet and up to 108 inches in width. It has adjustable width and feet, making it suitable for top deck, angle deck, or side deck mounts. The tower is made of high-quality materials, with seamless 2.25″ aircraft grade 6063 aluminum tubing and solid CNC machined 6061 feet and joints throughout. All hardware is stainless steel, so you can rest assured that the tower will last for years to come. Plus, it easily folds down below the windshield for boat storage by removing just one screw in each front leg.
Why We Like This
Extra Large Universal Wakeboard Tower – Fits Boats 17′ – 24′
Adjustable Width – Fits Widths 78″ – 108″ Center on Center
Patented Single Bolt Feet Requires only 1 Drilled Hole Per Foot
Adjustable Feet Can Fit Top Deck, Angle Deck, or Side Deck Mounts.
Easily folds down below windshield for boat storage by removing 1 screw in each front leg
Quality Craftmanship and Materials
Integrated Bimini Top (Optional) – Tower Mounted Bimini Tops that are up and out of the way, Folding Over Tower Bimini or Flat Cargo Bimini
Common Questions & Answers
Q: How much weight can the Krypt Towers Origin Catapult Universal Wakeboard Boat Tower hold?
A: The Krypt Towers Origin Catapult Universal Wakeboard Boat Tower can hold up to 200 lbs when properly installed.
Q: Does this product come with a warranty?
A: Yes, the Krypt Towers Origin Catapult Universal Wakeboard Boat Tower comes with a 1 year limited warranty.
Q: Is the tower easy to install?
A: Yes! The patented single bolt feet only requires one drilled hole per foot so installation is quick and easy.
Additional Product Information
| Weight | 70 |
Pair Kicker 45KM84L 8 600 Watt Marine Boat Waterproof Speakers w-LEDs KM8 Bundle with Rockville DMAC80B Dual 7.7 Black Aluminum Wakeboard Tower Speaker Enclosure
Are you looking for a marine-grade speaker system that will last? The Kicker 45KM84L 8″ 600 Watt Marine Boat Waterproof Speakers w/LED’s KM8 Bundle with Rockville DMAC80B Dual 7.7″ Black Aluminum Wakeboard Tower Speaker Enclosure is an excellent choice for those who are looking for a reliable and powerful system that can handle any type of weather conditions. This bundle includes two pairs of Kicker 45KM84L 8″ 1200 Watt Marine Boat Waterproof Speakers w/ LEDs and two Rockville DMAC80B Dual 7.7″ Black Aluminum Metal Wakeboard Tower Speaker Enclosures to ensure that you have the best sound experience no matter where you are.
Why We Like This
The Kicker 45KM84L speakers feature a RMS power handling of 150 Watts (Per Speaker), with a peak power handling of 300 Watts (Per Speaker). They also have a sensitivity of 92 dB, four-ohm voice coil, one-inch titanium tweeter, UV-treated polypropylene woofer and santoprene surround, UV-resistant polymer basket and locking/sealed terminal cover.
The Rockville DMAC80B black aluminum double can wakeboard tower enclosures are made of high quality 6061 aircraft grade aluminum with a beautiful black powder-coat finish. They are 100% waterproof and fully marinized against salt and fresh water conditions and feature an internally wired design for clean install without any exposed wires or terminals.
The Kicker 45KM84L speakers meet or exceed ASTM standards for UV & salt/fog exposure, have an impressive frequency response of 30 Hz – 21 kHz, impedance of 4 ohms, mounting hole diameter 6.7″ inches and mounting depth 3.75″ inches.
This bundle includes all the necessary mounting hardware required to install your system as well as white & charcoal grilles with seven-color LED system included with the Kicker 45KM84L speakers.
This is an excellent choice for those who are looking for reliable & powerful marine grade speaker system that can handle any type of weather conditions without sacrificing sound quality or performance.
Common Questions & Answers
Q: What is the RMS power handling on these speakers?
A: The RMS power handling on these speakers is 150 Watts (per speaker).
Q: Are these speakers waterproof?
A: Yes, these speakers are fully waterproof and marinized against salt & fresh water conditions so they can be used in any type of environment without worry about damage from moisture or other elements.
Q: What type of mounting hardware is included in this bundle?
A: This bundle includes 316L stainless mounting hardware as well as white & charcoal grilles with seven-color LED system included with the Kicker 45KM84L speakers to make installation easy.
Additional Product Information
| Weight | 39 |
Reborn Tower Launch Reverse Arch Universal Wakeboard Boat Tower – Fits Boats with Beams 78 – 106 – Easily Folds Down – Seamless 2.25inch 6063 Aircraft Aluminium Tubing (Black)
The Reborn Tower Launch Reverse Arch Universal Wakeboard Boat Tower is an amazing product for all water sports enthusiasts! This tower is designed to fit boats with beams from 78-106, and with its reverse arch design, it makes for a unique and stylish addition to any boat. This tower is made from seamless 2.25 inch 6063 aircraft grade aluminum tubing, and comes with CNC machined solid 6061 aluminum fittings and stainless steel hardware. The tower also easily folds down below windshield height for easy storage in your garage or boat house.
Why We Like This
Universal design fits nearly every boat on the market
Reverse arch design provides unique styling
Made from strong and durable materials for long-term use
Easily folds down for storage when not in use
Quick release knobs make installation simple and straightforward
Common Questions & Answers
Q: How long does it take to install?
A: It should take around 3 hours to install this tower. It is an easy DIY project that anyone can do with the help of a few basic tools.
Q: Does the forward facing tower sway when riding?
A: No, the forward facing tower has heavy duty reinforced deck mounts which prevents swaying even during advanced tricks.
Q: Is this product suitable for saltwater use?
A: Yes, this product is designed to be used both in fresh and saltwater environments.
Additional Product Information
| Weight | 75 |
Benefits of Wakeboard Tower Mounting Feet
1. Improved stability: Wakeboard Tower mounting feet provide an increased level of stability, making it easier to maneuver your boat in rough conditions.
2. Increased visibility: Wakeboard Towers are typically much taller than traditional boat towers, which provide better visibility while on the water.
3. More space: By mounting a wakeboard tower on your boat, you can gain more usable space for activities like skiing or wakeboarding.
4. Increased safety: The extra height of a wakeboard tower provides an extra layer of safety while out on the water as you can easily spot approaching boats and obstacles from a greater distance.
5. Customization: Wakeboard Tower Mounting Feet allow for customization of your boat with accessories like speakers, lights, and racks that fit the exact size and shape of your setup.
Buying Guide for wakeboard tower mounting feet
What To Look For When Buying Wakeboard Tower Mounting Feet
Mount Type:
When buying wakeboard tower mounting feet, it is important to consider the type of mount you will need. There are several different types of mounts available, including swivel mounts, fixed mounts, and adjustable mounts. Each type has its own advantages and disadvantages, so it is important to choose the mount that best suits your needs.
Material:
The material of the wakeboard tower mounting feet is also an important factor to consider. The most common materials used for these types of mounts are aluminum or stainless steel. Aluminum is lightweight and corrosion-resistant, while stainless steel offers strength and durability. Make sure to choose a material that can withstand the elements and provide a secure hold on your wakeboard tower.
Installation:
When purchasing wakeboard tower mounting feet, make sure to consider how easy it is to install them. Some mounts come pre-drilled for easy installation, while others require more work and special tools for installation. If youre unsure about how to install the mount yourself, its best to consult a professional or take advantage of any installation services offered by the manufacturer.
Price:
Wakeboard tower mounting feet can range in price from relatively inexpensive models to more expensive ones with advanced features. Its important to consider your budget when selecting a mount so that you dont end up spending more than you can afford on a product that wont meet your needs. Be sure to compare prices between different brands and models before making your purchase.
Durability:
Durability is another key factor when choosing wakeboard tower mounting feet, as they need to be able to withstand constant exposure to water and other elements without becoming damaged or worn out quickly. Make sure the mount you choose is made from high-quality materials that are designed specifically for use in marine environments.
In conclusion, wakeboard tower mounting feet are an essential part of any wakeboard tower. They provide a secure and stable base for the tower to rest on and also help to spread the load evenly across the boats hull. Installing them correctly is key to ensuring that your tower will stay in place even when the waves get rough. Make sure you purchase quality mounting feet that are compatible with your make and model of boat for a secure and safe installation of your wakeboard tower.
