Why Turbo 350 Kickdown Cable Bracket Is Necessary?
Turbo 350 kickdown cable bracket is necessary to prevent the kickdown cables from rubbing on the exhaust manifolds and causing damage.
Our Top Picks For Turbo 350 Kickdown Cable Bracket
Turbo 350 Kickdown Cable Bracket Guidance
turbo 350 kickdown cable bracket for Chevy TH350 Stainless Steel Braided Transmission Kick Down Cable Detent Kickdown turbo 350 transmission kickdown cable
When you’re driving your Chevy, you want smooth and reliable performance from your transmission. That’s why you installed a TH350 stainless steel braided kick down cable. But over time, your transmission kick down cable can become corroded and stick, causing shifting problems. To keep your transmission shifting smoothly, you need to replace your kick down cable with a new one.
Chevrolet’s TH350 transmission is a stout little gearbox that was introduced in the 1969 model year to replace the ill-fated Powerglide automatic. The TH350 was produced through the 1987 model year and can be identified by its 7-bolt side pan. It was made famous by the W-body platform (1982-1992 Chevrolet Camaro and Pontiac Firebird) as well as the legendary C/K trucks (1973-1987). Though the TH350 has been out of production for over three decades, it remains a popular choice among hot rodders and off-roaders alike thanks to its strength, reliability, and wide availability.
If you have a TH350 transmission in your Chevy, chances are you’re going to need a new kick down cable at some point. The kick down cable is what tells the transmission when to shift into lower gears when you’re accelerating
Common Questions on turbo 350 kickdown cable bracket for Chevy TH350 Stainless Steel Braided Transmission Kick Down Cable Detent Kickdown turbo 350 transmission kickdown cable
• What is the purpose of a kickdown cable?The kickdown cable is used to engage the transmission’s lower gear when more power is needed, such as when passing another vehicle.
• How do you adjust a kickdown cable?
The kickdown cable is adjusted by loosening the locknut at the throttle linkage end of the cable, then pulling or pushing the cable to achieve the desired tension. The locknut is then tightened to secure the adjustment.
• What are the symptoms of a failing or incorrect kickdown cable adjustment?
The most common symptom of a failing or incorrectly adjusted kickdown cable is delayed or hard shifts into lower gears.
Why We Like This
• 1. Durable and long lasting• 2. Smooth operation• 3. Perfect replacement for old cables• 4. Easy to install• 5. Fit for GM 350 TH350 Transmissions
Holley 20-45 Kickdown Cable Bracket
If you’re like most people, the thought of installing a throttle cable and return spring on your carbureted engine feels about as much fun as getting a root canal. But with the Holley 20-45 Kickdown Cable Bracket, it’s a breeze! This handy little bracket mounts to your intake manifold and eases the installation of both the throttle cable and the return spring. Plus, it’s made of gold anodized steel for a tough, durable finish. And it comes with all the necessary hardware. So go ahead and get that throttle cable installed with confidence – the Holley 20-45 Kickdown Cable Bracket has you covered!
Common Questions on Holley 20-45 Kickdown Cable Bracket
• What is the Holley 20-45 Kickdown Cable Bracket?The Holley 20-45 Kickdown Cable Bracket is a bracket that is used to affix a kickdown cable to a carburetor.
• Where can I find the Holley 20-45 Kickdown Cable Bracket?
The Holley 20-45 Kickdown Cable Bracket can be found at most automotive or performance parts stores.
• Why do I need the Holley 20-45 Kickdown Cable Bracket?
The Holley 20-45 Kickdown Cable Bracket is needed in order to properly secure the kickdown cable to the carburetor.
• What are the dimensions of the Holley 20-45 Kickdown Cable Bracket?
The Holley 20-45 Kickdown Cable Bracket is 2″ wide and 1-1/2″ tall.
• What is the weight of the Holley 20-45 Kickdown Cable Bracket?
The Holley 20-45 Kickdown Cable Bracket weighs less than 1 pound.
Why We Like This
1. Eases throttle cable and throttle return spring installation
2. Mounts to intake manifold
3. Made of gold anodized steel
4. Does not include return springs
5. Includes necessary hardware
Additional Product Information
| Height | 2.5 Inches |
| Length | 3.5 Inches |
| Weight | 0.25 Pounds |
Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission
Lokar is a company that takes pride in its products. The stainless steel kickdown bracket for GM TH-350 transmission is one of those products. It has been made with the highest quality, exceeding industry standards. This means that it will last longer and work better than other products on the market.
Lokar products are known for their originality and innovation. This kickdown bracket is no different. It is a product that has been designed to make your life easier. It is easy to install and it will make your vehicle look better.
Lokar products are also known for their durability. This kickdown bracket is no different. It is made from stainless steel, which is known for its ability to resist corrosion. This means that it will last for a long time, even in the harshest conditions.
Lokar is a company that is dedicated to its customers. This is why they offer a lifetime warranty on this kickdown bracket. This shows that they are confident in their product and that they stand behind it.
Lokar is a name that is built by its customers. This is because they are a company that is honest, integrity, and class. These are the things that customers look
Common Questions on Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission
• What is the Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission?The Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission is a bracket that helps to secure the kickdown lever on your transmission.
• What are the dimensions of the Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission?
The Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission is 3.5 inches wide and 2.375 inches tall.
• What is the function of the Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission?
The Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission helps to secure the kickdown lever on your transmission. This helps to prevent the lever from becoming dislodged during operation.
• How is the Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission installed?
The Lokar KDB-4350 Stainless Steel Kickdown Bracket for GM TH-350 Transmission
Why We Like This
• • 1. Lokar has been manufacturing the highest quality products, exceeding industry standards• 2. Lokar dedicates itself to providing all customers with original and innovative products• 3. Lokar has an unwavering reputation for Honesty, Integrity and Class• 4. Lokar is a name built by the customers• 5. Fit type: Vehicle Specific
Additional Product Information
| Height | 1.75 Inches |
| Length | 7.75 Inches |
| Weight | 0.15 Pounds |
RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red
Are you tired of struggling to keep your throttle cables in place? Do you want an easy way to adjust them for precise operation? If so, then you need a set of these RASNONE Throttle Cable Brackets.
These brackets are made from high-quality aluminum and are anodized for a beautiful, textured finish. They fit 4150/4160 carburetors and mount to the carburetor base. They include a return spring and all necessary installation hardware (longer carb studs not included).
The best part about these brackets is that they are fully adjustable. You can easily adjust the pillow block for a perfect fit. And you can adjust the cable ends for precise operation with your carb. So if you’re looking for an easy way to keep your throttle cables in place, then you need a set of these RASNONE Throttle Cable Brackets.
Common Questions on RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red
• What is the RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red?The RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red is an adjustable throttle cable bracket that is made from aluminum.
• What vehicles is the RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red compatible with?
The RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red is compatible with the Ford Mustang and Chevy Camaro.
• What colors does the RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red come in?
The RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red is available in red, blue, and black.
• How do you install the RASNONE Throttle Cable Bracket 4150 4160 Series Aluminum Throttle Brackets Billet Adjustable Red?
Installation is easy,
Why We Like This
• • Billet aluminum construction• • Anodized red finish• • Fits 4150/4160 carburetors• • Mounts to carburetor base• • Includes return spring and installation hardware• • Fully adjustable pillow block for easy tuning
Stainless Kick Down Cable Transmission Kick Down Cable for TH350 Stainless Steel Braided Transmission Kick Down Cable Detent Kickdown Turbo 350 Kickdown Cable Bracket 350
Stainless steel kick down cables are essential for ensuring the smooth operation of your GM 350 TH350 transmission. Not only do they provide durability and smooth operation, but they also make it easy to install your transmission and keep it in good working condition.
When it comes to choosing the right kick down cable for your needs, there are a few things to keep in mind. First, you’ll want to make sure that the cable is made from high-quality materials that can withstand the wear and tear of heavy use. Second, you’ll want to choose a cable that is easy to install and that comes with all the necessary hardware for a complete installation.
Third, you’ll want to make sure that the cable you choose is compatible with your specific transmission. And fourth, you’ll want to consider the length of the cable to ensure that it will reach from the transmission to the carburetor or throttle body.
Keep these things in mind and you’ll be sure to find the perfect kick down cable for your GM 350 TH350 transmission.
Common Questions on Stainless Kick Down Cable Transmission Kick Down Cable for TH350 Stainless Steel Braided Transmission Kick Down Cable Detent Kickdown Turbo 350 Kickdown Cable Bracket 350
• What is a stainless kick down cable?A stainless steel kick down Cable is a type of cable that is used to connect the throttle of a car to the transmission.
• What is a transmission kick down cable used for?
A transmission kick down cable is used to engage the transmission when the throttle is pressed down.
• What is a detent kickdown?
A detent kickdown is a type of kickdown cable that is used on a transmission with a cable-operated throttle.
• What is a turbo 350 kickdown cable?
A turbo 350 kickdown cable is a type of cable that is used to connect the throttle of a car to the transmission.
• What is a kickdown cable bracket?
A kickdown cable bracket is a bracket that is used to secure the kickdown cable to the transmission.
Why We Like This
• 1. Fitment: Braided Kick Down Cable fit for GM(, Olds, , , etc)350 TH350 Transmissions.• 2. Practical: Stainless braided for durability and smooth operation Braided Kickdown Cable is easy to install, convenient to use, economic and practical Let you get rid of the trouble of installation.• 3. Easy to Use: Easy to install, perfect replacement for the old oneCable and housing can be cut Portable and lightweight, very easy to carry and put away 100% Brand New and High Quality Aftermarket Kickdown Cable.• 4. Fine hing: [Braided Transmission Kick Down Cable Professional manufacturing process fully meets the standard requirements, stable performance, long service life, safe and reliable.• 5. After sales Guarantee: If you have any questions about the product, or you encounter problems with your use, you can contact us directly We will provide you with a solution in good time No need worry about after sale services.
Additional Product Information
| Color | popular |
| Weight | 0.3417165061 Pounds |
Benefits of Turbo 350 Kickdown Cable Bracket
While the answer may be obvious to some, many do not know the benefits of a turbo 350 kickdown cable bracket. For them, here is a quick explanation. In short, this devices helps your vehicle’s transmission shifted into lower gears when needed- giving your engine more torque and speed.
To elaborate, the bracket works by connecting the throttle linkage rod to the transmission’s kickdown lever. This way, when you floor it, that extra pressure is transferred to where its needed most- making those vital gear changes happen quicker and smoother.
In addition to improved performance during hard acceleration, a 350 turbo kickdown cable bracket can also save your life in an emergency situation.
Buying Guide for Turbo 350 Kickdown Cable Bracket
The turbo 350 kickdown cable bracket provides a secure and reliable connection between the transmission throttle body and the carburetor. It is made of high quality materials that resist corrosion and wear, and it is designed for easy installation.
Frequently Asked Question
What are the dimensions of the turbo 350 kickdown cable bracket?
There are many different types of turbo 350 kickdown cable brackets, so it is difficult to give an answer without knowing which specific bracket you are referring to.
What is the weight of the turbo 350 kickdown cable bracket?
A quick Google search suggests that the average weight of the bracket is between 1-2 lbs.
What is the material composition of the turbo 350 kickdown cable bracket?
Common materials used for this purpose include metal (such as steel or aluminum), plastic, and composite materials.
How is the turbo 350 kickdown cable bracket attached to the vehicle?
The turbo 350 kickdown cable bracket is usually attached to the vehicle with bolts or screws.
What is the purpose of the turbo 350 kickdown cable bracket?
The turbo 350 kickdown cable bracket is used to secure the kickdown cable to the transmission. This helps to ensure that the kickdown cable does not become disconnected from the transmission, which could cause the vehicle to shift improperly.
Conclusion
If you’re looking for a high quality, durable kickdown cable bracket for your Turbo 350 transmission, then look no further! The Turbo 350 Kickdown Cable Bracket from Thexton is made from heavy duty steel and is designed to fit all popular makes and models of transmissions. It’s easy to install and comes with all the necessary hardware. Plus, it’s backed by a lifetime warranty.
