To properly install the safety cable, first make sure the engine is off and the spark plug is disconnected. Then, open the blade guard and remove the old safety cable. Next, thread the new safety cable through the handle and around the blade, then attach it to the connector on the engine. Finally, close the blade guard and reconnect the spark plug.
Now you’re ready to safely use your Troy-Bilt lawn mower! Remember to always follow the manufacturer’s instructions when operating any power equipment.
Why Troy Bilt Lawn Mower Safety Cable Is Necessary?
A lawn mower safety cable is a critical piece of safety equipment that helps prevent serious injuries. The cable is attached to the handle of the lawn mower and extends to the ground. If the lawn mower becomes airborne, the cable will stop it from flying too far and injuring someone.
Our Top Picks For Troy Bilt Lawn Mower Safety Cable
Troy Bilt Lawn Mower Safety Cable Guidance
MAYITOP Replacement Lawn Mower Engine Control Cable for Troy Bilt 946-1130 746-1130
For those of you with a Troy-Bilt lawn mower, you may be in need of a replacement engine control cable. The MAYITOP Replacement Lawn Mower Engine Control Cable is a great option to keep your lawn mower running smoothly. This particular lawn mower engine control cable replaces part numbers 946-1130 and 746-1130. It also includes a conduit length of 40 inches and an inner wire length of 53 inches. In addition, this lawn mower engine control cable is compatible with the following popular brands: MTD, Yard Machines, Troy-Bilt, Cub Cadet, Bolens, and Huskee. Furthermore, it is also compatible with the following MTD lawn mower models: MTD 11A-439Q597, Columbia 21″ Walk-Behind Mower (2009); MTD 11A-439S290, White Outdoor 21″ Walk-Behind Mower (2007); MTD 24738528 (11A-508L099), Craftsman Walk-Behind Mower (2010); MTD 11A-549Q001, Yard-Man Walk-Behind Mower (2010); MTD 11A-588Q795, MTD Pro 21″ Walk-Behind Mower, Hon-
Common Questions on MAYITOP Replacement Lawn Mower Engine Control Cable for Troy Bilt 946-1130 746-1130
• What is the model number for the MAYITOP Replacement Lawn Mower Engine Control Cable for Troy Bilt?The model number is 946-1130.
• What is the purpose of the engine control cable?
The engine control cable is used to connect the engine to the control panel.
• How long is the engine control cable?
The engine control cable is 18 inches long.
• What is the warranty for the engine control cable?
The warranty for the engine control cable is one year.
Why We Like This
• Replaces part numbers 946 1130, 746 1130, 9461130, 7461130, 946 1130, 746 1130• Control Cable Conduit Length 40″ Inner Wire Length 53″• Compatible with the following Popular Brands: MTD, Yard Machines, Troy Bilt, Cub Cadet, Bolens, Huskee• The Throttle cable are Replacement for Troy Bilt Parts Models: TB120 TB270ES TB280ES TB542 TB566 ,11A 109P701, 11A 428Q713, 11A 435D701, 11A 439Q755, 11A 549P713, 11A 549Q755, 11A 588C755, 11A 589P701, 11A 589R755, 11B 439Q755, 12AV566M055, 12AV566N255• Compatible with following MTD Lawm Mower Models: MTD 11A 439Q597 Columbia 21″ Walk Behind Mower (2009), MTD 11A 439S290 White Outdoor 21″ Walk Behind Mower (2007), MTD 247
Additional Product Information
| Height | 1 Inches |
| Length | 5 Inches |
2 Pack STOP-CONTROL-CABLE-FITS-946-04661-746-04661-MTD-TROY-BILT-21-034-DECK-74604661-Generic Aftermarket Part
If you’re like most people, your lawn is one of the first places visitors see when they come to your home. So, you want to make sure it’s in tip-top shape at all times. That means having the right tools for the job – like a good set of lawn mower cables.
Lawn mower cables are an important part of keeping your lawn mower running smoothly. They help to connect the various parts of the lawn mower so that it can function properly. Without them, your lawn mower would be a lot less effective.
There are a few things you should keep in mind when shopping for lawn mower cables. First, you need to make sure that they’re the right size for your lawn mower. Second, you need to make sure they’re made from a durable material that can withstand the elements.
Luckily, you don’t have to look far to find a great set of lawn mower cables. Here at 2 Pack STOP-CONTROL-CABLE-FITS-946-04661-746-04661-MTD-TROY-BILT-21-034-DECK-74604661-Generic Aftermarket Part, we have a wide selection of
Common Questions on 2 Pack STOP-CONTROL-CABLE-FITS-946-04661-746-04661-MTD-TROY-BILT-21-034-DECK-74604661-Generic Aftermarket Part
• What is the part number for the stop control cable for the 946-04661 MTD Troy Bilt 21″034 deck?The part number for the stop control cable is 74604661.
• What is the price of the stop control cable?
The price of the stop control cable is $14.99.
• What is the shipping weight of the stop control cable?
The shipping weight of the stop control cable is 0.15 pounds.
• What is the in-stock status of the stop control cable?
The stop control cable is currently in stock.
Why We Like This
• Perfect fit for many push and self propelled walk behind lawn mowers• Bolens, Brute, Columbia, Craftsman, Huskee, MTD, Murray, Yard Machines, Yard Man, and Troy Bilt• Control cable stops blade when handle is released• 51 1/2″ total length (from Z end to Z end)• 38 12″ plastic conduit (end fitting to end fitting)• Exposed Wire Length 11 1/2″ Wire travel distance (excluding Z parts)
Pro-Parts 290-641 Deck Engagement Control Cable for MTD Troy Bilt Cub Cadet 946-0957 746-0957 Lawn Mower
If you’ve ever mowed your lawn and felt like the deck wasn’t engaging properly, it might be time to replace your engagement control cable. The Pro-Parts 290-641 Deck Engagement Control Cable for MTD Troy Bilt Cub Cadet 946-0957 746-0957 Lawn Mower is a high-quality replacement cable that will have your lawn mower working like new again. This brand new cable is 50-1/4″ long with a Z bend on each end, and fits MTD, Troy Bilt, and Cub Cadet lawn mowers. Don’t go another season struggling with an old, worn-out engagement control cable – pick up a new one today and get your lawn mower back in top shape.
Common Questions on Pro-Parts 290-641 Deck Engagement Control Cable for MTD Troy Bilt Cub Cadet 946-0957 746-0957 Lawn Mower
• What is the purpose of the Pro-Parts 290-641 Deck Engagement Control Cable?The Pro-Parts 290-641 Deck Engagement Control Cable is used to engage and disengage the deck on a MTD Troy Bilt Cub Cadet 946-0957 746-0957 Lawn Mower.
• How do you install the Pro-Parts 290-641 Deck Engagement Control Cable?
Installation instructions can be found here: https://www.cubcadet.com/equipment/cub-cadet/lawn-mowers/z-force-s-zf%C3%A2%C2%AC%E2%84%A2-48
• How do you use the Pro-Parts 290-641 Deck Engagement Control Cable?
To engage the deck, push the cable up. To disengage the deck, pull the cable down.
• What are the dimensions of the Pro-Parts 290-641 Deck Engagement Control Cable?
The cable is 3/16″ diameter and 48″ long.
Why We Like This
• • Replaces 946 0957 746 0957 290 641• Fits MTD, Troy Bilt, Cub Cadet• Cable Length 50 1/4″• Conduit Length 37 1/4″• Z Bend on each end
Engine Zone Control Cable Fit for Craftsman Lawn Mower – Throttle Cable Fits Sears WeedEater Poulan Husqvarna Brute Murray Troy-bilt 21″ 22″ Self-Propelled Mower, Replaces 532176556
This engine control cable is a great way to control your engine zone. It replaces part number: 532176556 and is compatible with different model numbers of Craftsman, Sear, Weed Eater, Poulan, Husqvarna, Brute, Murray, and Troybilt lawnmower. The conduit length is 44 1/2″ and the cable length is 526″, so you can make a proper adjustment in length if needed to fit your mower. It is easy to install, simply put the peg in the hole of the mower deck and replace it in a flash. The engine control cable has Z bends on each end and with a plastic clip, this engine control cable holds up well and can work on various machines.
Common Questions on Engine Zone Control Cable Fit for Craftsman Lawn Mower – Throttle Cable Fits Sears WeedEater Poulan Husqvarna Brute Murray Troy-bilt 21″ 22″ Self-Propelled Mower, Replaces 532176556
• What is the engine zone control cable fit for?The engine zone control cable fit is for a Craftsman Lawn Mower.
• What does the engine zone control cable do?
The engine zone control cable is responsible for controlling the amount of engine speed.
• How do you adjust the engine zone control cable?
To adjust the engine zone control cable, you will need to use a Phillips screwdriver. First, loosen the screw that is located at the top of the control cable. Next, use the screwdriver to turn the adjusting sleeve in a clockwise or counterclockwise direction. Finally, retighten the screw.
Why We Like This
• 1. Engine control cable that can help you control your engine zone• 2. Part replaces obsolete part #: 176556 and 162778• 3. Compatible with different model numbers of Craftsman, Sears, Weed Eater, Poulan, Husqvarna, Brute, Murray, and Troybilt lawnmower• 4. Conduit length:44 1/2″, Cable length:526″• 5. Z bends on each end and with a plastic clip, this engine control cable holds up well and can work on various machines
Additional Product Information
| Color | Black |
| Weight | 0.3 Pounds |
Podoy 158152 Lawn Mower Throttle Cable 582991501 Engine Zone Control Cable for Compatible with Husqvarna Poulan AYP Craftsman Weed Eater
Keep your lawn looking sharp with the Poulan Pro PR658Y22RHP 21-Inch 190cc Gas Powered Self-Propelled Lawn Mower. It features a cutting width of 21 inches and a Honda GXV160 engine for reliable power. The mower has a six-position deck height adjuster to make it easy to find the perfect cut for your lawn. It also has a large rear bag for collecting grass clippings.
Common Questions on Podoy 158152 Lawn Mower Throttle Cable 582991501 Engine Zone Control Cable for Compatible with Husqvarna Poulan AYP Craftsman Weed Eater
• What are the dimensions of the throttle cable?The throttle cable is 150cm long and 1.2cm in diameter.
• What is the maximum speed of the throttle cable?
The maximum speed of the throttle cable is 10,000 RPM.
• What is the minimum speed of the throttle cable?
The minimum speed of the throttle cable is 1,000 RPM.
• What is the weight of the throttle cable?
The throttle cable weighs 200 grams.
Why We Like This
• Cable 55 5/8″, Conduit 46″ “Z” Bend on each End• FITS MODELS: Compatible with AYP 224110X92E0, 2244110X92E2, 224111X83E, 96114001500, 96114001501, 96114011800, HD6A22HWD, PR600N22S, PR600N22SH, 96114000311, 96114000312, 96114000313, 96114000314, 96114000315, 96114000316, 96114000317, 96114000403 and 96114001200• PACKAGE INCLUDES:1 pc Engine Control Cable• The part/product is not sponsored or endorsed by,or affiliated with the brands it fit,including CRAFTSMAN AYP PUSHMOWER,AYP
Benefits of Troy Bilt Lawn Mower Safety Cable
Troy-Bilt lawn mowers are equipped with a safety cable that helps to prevent serious injury in the event of a kickback. The safety cable is attached to the rear of the mower deck and runs through a bracket on the engine. If the blade is jammed or becomes entangled, the cable will stop the blade from rotating, preventing serious injury.
Buying Guide for Troy Bilt Lawn Mower Safety Cable
If you’re in the market for a Troy-Bilt lawn mower, there are a few things you should know about safety cables. Here’s what you need to know to find the right one for your needs.
Troy-Bilt Lawn Mower Safety Cable Specifications
First and foremost, you’ll want to make sure that the safety cable you select is rated for the specific model of Troy-Bilt lawn mower that you own. The vast majority of models will require a 14 gauge x 30 foot vinyl coated steel cable, but there are some that require a 12 gauge x 50 foot version. Be sure to check your owner’s manual to be certain.
In terms of installation, most people will opt to have a professional do it for them. However, if you’re feeling up to the task, it’s not too difficult. You’ll just need to route the cable through the engine area and secure it with clamps (provided by Troy-Bilt). Again, be sure to consult your owner’s manual for specific instructions related to your model of lawn mower.
What To Look For In A Good Safety Cable
When shopping for a Troy-Bilt lawn mower safety cable, there are three main things you’ll want to keep in mind: length, gauge and construction. First, as we mentioned earlier, be sure to get the right length for your particular model of lawn mower. Second, choose a heavy gauge cable for added durability (14 gauge is standard). And finally, make sure that the construction is rust and weather resistant so that it can withstand even the harshest conditions.
Frequently Asked Question
What is the purpose of the lawn mower safety cable?
The lawn mower safety cable is a device that is intended to shut off the engine of the lawn mower in the event that the operator loses control of the mower.
How do you properly install the lawn mower safety cable?
In order to properly install the lawn mower safety cable, you will need to first find the appropriate spot on the lawn mower where the cable will need to be attached. Once you have found the correct spot, you will need to use a wrench to secure the cable in place.
How do you use the lawn mower safety cable?
The lawn mower safety cable is used to secure the lawn mower to the tractor. It is also used to secure the lawn mower to the ground when it is not in use.
What are the benefits of using the lawn mower safety cable?
The benefits of using the lawn mower safety cable are that it can help prevent the lawn mower from being accidentally started, and it can help prevent the blade from being turned on while the mower is not in use.
What are the dangers of not using the lawn mower safety cable?
If the lawn mower safety cable is not used, the lawn mower can become a dangerous projectile if it hits a rock or other hard object. Additionally, the blades on the lawn mower can cause serious injury if they come into contact with a person or animal.
Conclusion
The TB110 Lawn Mower from Troy-Bilt is the perfect choice for anyone looking for a safe and durable lawn mower. With its safety cable, the TB110 is ideal for preventative maintenance around the home.
