Best Small Block Chevy Head Bolts That You Can Buy

There are a few different ways to look at the best small block Chevy head bolts. Torque and awareness are critical when it comes to this engine. The bolts themselves are not that different from other small engines; however, the way they are used is very important. Make sure to keep an eye on the exhaust ports when tightening the head bolts. These can strip very easily. Also, be careful not to over-tighten the bolts. This can break them.

Why Small Block Chevy Head Bolts Is Necessary?

Best small block chevy head bolts are necessary to ensure that your engine is properly secured. They help to keep the engine in place and prevent it from moving around while you are driving. Additionally, they help to distribute the weight of the engine evenly so that all cylinders fire at once, providing optimal power and efficiency.

Our Top Picks For Best Small Block Chevy Head Bolts

Best Small Block Chevy Head Bolts Guidance

FEL-PRO ES 72856 Head Bolt Set

FEL-PRO ES 72856 Head Bolt Set

Check Price On Amazon

If you’re looking for a high quality head bolt set that meets or exceeds all original equipment specifications, then look no further than FEL-PRO. Their head bolt sets are application specific, so you can be sure to get a perfect fit. They also avoid the risk associated with re-using T-T-Y (torque to yield) head bolts. Plus, they’re validated for fit, form and function, so you know you’re getting the best possible product. And with a 1 year manufacturer’s warranty, you can be confident in your purchase.

Common Questions on FEL-PRO ES 72856 Head Bolt Set

• What is the part number for the head bolt set?
The part number for the head bolt set is FEL-PRO ES 72856.

• What is the material of the head bolt set?
The head bolt set is made of steel.

• What is the size of the head bolt set?
The head bolt set is M8 x 1.25 x 40mm.

• What is the thread pitch of the head bolt set?
The thread pitch of the head bolt set is 1.25mm.

• How many head bolts are in the set?
The set includes 10 head bolts.

Why We Like This


• Meets or exceeds all original equipment specifications

• Application specific design to ensure a perfect fit

• Avoid risk associated with re use of T T Y (torque to yield) head bolts

• Validated for fit, form and function

• Unsurpassed quality you can trust

Additional Product Information

Height 2.3 Inches
Length 6.3 Inches
Weight 1.25 Pounds

JEGS Cylinder Head Bolt Kit | Fits 1966-1998 Big Block Chevy Engines | Made In USA | Re-Usable | 7/16-14 Thread SIze | 150,000 PSI Fastener Yield Strength

JEGS Cylinder Head Bolt Kit | Fits 1966-1998 Big Block Chevy Engines | Made In USA | Re-Usable | 7/16-14 Thread SIze | 150,000 PSI Fastener Yield Strength

Check Price On Amazon

JEGS Cylinder Head Bolt Kit is ideal for engine repair when changing the cylinder heads or head gaskets. It seals cylinder heads properly at a bargain price. This kit fits 1966-1998 Big Block Chevy Mark IV engines including: 396 402 427 454 and others. It is made in USA with high quality materials and assembly. These are not torque-to-yield one-time-use fasteners. You can use them repeatedly.

Common Questions on JEGS Cylinder Head Bolt Kit | Fits 1966-1998 Big Block Chevy Engines | Made In USA | Re-Usable | 7/16-14 Thread SIze | 150,000 PSI Fastener Yield Strength

• What is the JEGS Cylinder Head Bolt Kit?

The JEGS Cylinder Head Bolt Kit is a bolt kit that is made in the USA and is made to fit Big Block Chevy Engines from 1966-1998. The kit includes 7/16-14 Thread Size bolts that have a 150,000 PSI Fastener Yield Strength.

• What are the dimensions of the JEGS Cylinder Head Bolt Kit?

The dimensions of the JEGS Cylinder Head Bolt Kit are 2.375″ x 1.75″ x 6.75″.

• What is the weight of the JEGS Cylinder Head Bolt Kit?

The weight of the JEGS Cylinder Head Bolt Kit is 3.5 lbs.

• What is the diameter of the JEGS Cylinder Head Bolt Kit?

The diameter of the JEGS Cylinder Head Bolt Kit is 0.75″.

Why We Like This

• 1. Ideal for engine repair when changing the cylinder heads or head gaskets.
• 2. Seals cylinder heads properly at a bargain price.
• 3. Fits 1966 1998 big block Chevy Mark IV engines including: 396 402 427 454 and others.
• 4. Made in USA with high quality materials and assembly.
• 5. Re usable 7/16 14 bolts as these are not torque to yield one time use fasteners.

Additional Product Information

Height 2.2 Inches
Length 7.6 Inches
Weight 6 Pounds

JEGS Cylinder Head Bolt Kit | Fits 1966-2000 Small Block Chevy Engines (Except LS Series) | Made In USA | 7/16-14 Thread Size | 150,000 PSI Fastener Yield Strength

JEGS Cylinder Head Bolt Kit | Fits 1966-2000 Small Block Chevy Engines (Except LS Series) | Made In USA | 7/16-14 Thread Size | 150,000 PSI Fastener Yield Strength

Check Price On Amazon

If you’re looking for an affordable and easy way to seal your cylinder heads properly, then this JEGS cylinder head bolt kit is ideal. It’s made in the USA from high-quality materials and includes all the necessary bolts for a small block Chevy engine, including the popular 283, 305, 307, 327, 350, 383 (stroker), and 400 engines. The bolts are 7/16-14 thread size and have a fastener yield strength of 150,000 PSI, so you can be sure they’ll do the job right.

Common Questions on JEGS Cylinder Head Bolt Kit | Fits 1966-2000 Small Block Chevy Engines (Except LS Series) | Made In USA | 7/16-14 Thread Size | 150,000 PSI Fastener Yield Strength

• What is the JEGS Cylinder Head Bolt Kit?

The JEGS Cylinder Head Bolt Kit is a bolt kit specifically designed for 1966-2000 small block Chevy engines.

• What are the dimensions of the bolts in the kit?

The bolts in the kit are 7/16-14 thread size.

• How many bolts are included in the kit?

There are 150,000 bolts included in the kit.

Why We Like This

• Seals cylinder heads properly
• Fits small block Chevy engines
• Made in the USA
• High quality materials and assembly
• Bargain price

Additional Product Information

Height 2.7 Inches
Length 6.3 Inches
Weight 5 Pounds

12-Point Cylinder Gasket Head Stud Bolt Kit Compatible with Chevy Small Block SBC 350 265 267 283 302 305 307 327 Engines 134-4001 PCE279.1001

12-Point Cylinder Gasket Head Stud Bolt Kit Compatible with Chevy Small Block SBC 350 265 267 283 302 305 307 327 Engines 134-4001 PCE279.1001

Check Price On Amazon

The PCE279.1001 12-Point Cylinder Gasket Head Stud Kit is a high quality, direct replacement for your old or damaged factory unit. This stud kit is manufactured from 8740 high tensile strength chromoly steel and undergoes strict quality testing to ensure zero defects. The surface is treated with black oxide finish for durability, and the old or damaged studs can be replaced with ease. The kit comes complete with all the necessary hardware for installation, and is backed by a lifetime warranty.

Common Questions on 12-Point Cylinder Gasket Head Stud Bolt Kit Compatible with Chevy Small Block SBC 350 265 267 283 302 305 307 327 Engines 134-4001 PCE279.1001

• What are the dimensions of the 12-Point Cylinder Gasket Head Stud Bolt Kit?
The kit includes 10 bolts that are each 12mm x 1.50mm in size. The overall length of the bolts is 193mm.

• What engine sizes is the 12-Point Cylinder Gasket Head Stud Bolt Kit compatible with?
The kit is compatible with Chevy Small Block engines that are displacement sizes 350, 265, 267, 283, 302, 305, and 307.

• What is the purpose of the 12-Point Cylinder Gasket Head Stud Bolt Kit?

The kit is used to replace the stock bolts that secure the cylinder head to the engine block. The studs are made from a stronger material than the stock bolts, and the larger diameter provides a more secure connection.

Why We Like This

• Cylinder Head Stud Kit is made of 8740 high tensile strength chromoly steel strict quality testing With professional processing technology the surface is treated with black oxide finish and the old or damaged cylinder head bolt kits can be directly replaced.
• Package Includes:14* Long Studs;4* Medium Studs;16* Short Studs;34* Washers;34* 12 Point NutsEach cylinder head screw set is strictly manufactured to ensure zero defects hardened and parallel ground washers are included with zero failures to ensure uniform load distribution and accurate torque readings.
• Compatible with:Chevy Small Block SBC 265 267 283 302 305 307 327 350 383 400.
• Replaces Part:PCE2791001, 134 4001, 2451 SWhile this is not genuine OEM part, it is a direct replacementSee below for the full vehicle compatible list.
• The Cylinder Gasket Head Stud Bolt from KET comes complete with a lifetime warrantyIf there is any problem with the product,please contact us and we’ll solve it for you immediately.

SBC Small Block Chevy V8 Cylinder Head Bolt Set

SBC Small Block Chevy V8 Cylinder Head Bolt Set

Check Price On Amazon

It has been said that the weakest link in any engine is the cylinder head bolt. While this may be true, it’s also important to remember that the cylinder head bolt is also one of the most vitalengine components. Not only does it provide the structural support necessary to keep the engine together, but it also helps to seal the combustion chamber, keeping the pressure and heat of the combustion process where it belongs.

Over time, however, even the strongest cylinder head bolt can become weakened or damaged, which is why it’s important to periodically check and replace them as needed. A blown head gasket, for example, can often be traced back to a damaged or faulty cylinder head bolt.

If you’re thinking about replacing your cylinder head bolts, you’ll want to make sure you get a quality, OEM-grade set like this SBC Small Block Chevy V8 Cylinder Head Bolt Set. These bolts are made from premium Grade 8 steel, which means they’re designed to withstand up to 120,000 PSI of proof load and 130,000 PSI of yield strength.

What’s more, the threads on these bolts are coated with a sealant to help prevent leaks, and they come with washers to help evenly distribute the clamping

Common Questions on SBC Small Block Chevy V8 Cylinder Head Bolt Set

• What is the part number for a SBC small block chevy V8 cylinder head bolt set?

The part number is 1234.

• What is the torque spec for a SBC small block chevy V8 cylinder head bolt set?

The torque spec is 65 ft-lbs.

• What is the thread size for a SBC small block chevy V8 cylinder head bolt set?

The thread size is 3/8″-16.

• How many bolts are in a SBC small block chevy V8 cylinder head bolt set?

There are 16 bolts in a SBC small block chevy V8 cylinder head bolt set.

• What is the head bolt sequence for a SBC small block chevy V8 cylinder head bolt set?

The head bolt sequence is 1-8-7-2-6-5-4-3.

Why We Like This


• 1. OEM quality Grade 8 cylinder head bolt set.
• 2. Replaces head bolts to prevent downtime.
• 3. For use with cast iron cylinder heads.
• 4. 120,000 PSI proof load.
• 5. 130,000 PSI yield strength.
• 6. 150,000 PSI tensile strength.
• 7. Threads are coated with sealant.” 1. The SBC Small Block Chevy V8 Cylinder Head Bolt Set is an OEM quality bolt set that is perfect for preventing downtime in the shop. 2. The bolt set is made of high quality materials and is designed for use with cast iron cylinder heads. 3. The set includes 120,000 PSI proof load, 130,000 PSI yield strength, and 150,000 PSI tensile strength bolts. 4. The threads on the bolts are coated with sealant to save you time during assembly. 5. The SBC Small Block Chevy V8 Cylinder Head Bolt Set is a great way to keep your cylinder heads in top condition.

Additional Product Information

Height 2 Inches
Length 8 Inches

Benefits of Small Block Chevy Head Bolts

It is often said that the best things come in small packages, and this is certainly true when it comes to block Chevy head bolts. While they may be small, these bolts pack a big punch when it comes to performance. Here are some of the benefits of investing in a set of block Chevy head bolts:

1. Increased Horsepower and Torque – One of the main benefits of installing block Chevy head bolts is that they can help increase horsepower and torque output from your engine. by providing a more secure connection between the cylinder heads and the rest of the engine. This allows for greater combustion efficiency which results in more power being produced.

2. Better sealing – Another important benefit associated with using these types of bolts is that they create a better seal between the cylinder heads andthe rest ofthe engine .

Buying Guide for Best Small Block Chevy Head Bolts

When looking for the best small block Chevy head bolts, there are a few things you need to keep in mind. First, what kind of heads are you using? There are several different types of heads available for small block Chevys, so you’ll want to make sure you get bolts that are compatible with your heads. Second, what size engine do you have? The size of your engine will dictate the size of the bolts you need. Third, what RPM range will your engine be operating at? Again, this will influence the size of bolts you need. Finally, what is your budget? Head bolts can vary widely in price, so it’s important to set a realistic budget before you start shopping.

Once you’ve answered these questions, you’re ready to start shopping for head bolts. When comparing different products, pay close attention to their material composition and strength rating. In general, stainless steel or titanium head bolts offer the best strength and durability. However, they also tend to be more expensive than other options. If cost is a concern, look for head bolts made from high-strength alloy steels. These are usually more affordable while still offering good strength and durability.

Once you’ve found some promising head bolt options, it’s time to compare prices between different vendors. Be sure to factor in shipping costs when making your final decision – sometimes it’s worth paying a bit more for head bolts if it means getting them delivered right to your doorsteps!

Frequently Asked Question

What are the best small block chevy head bolts for your application?

The best small block chevy head bolts for your application will depend on the specific make and model of your vehicle.

What are the benefits of using small block chevy head bolts?

There are many benefits to using small block chevy head bolts. They are much stronger than stock head bolts, so they will not stretch or break as easily. This makes them ideal for high performance applications where the engine is subject to high loads and stresses. They also have a much higher clamping force than stock head bolts, so they will keep the heads from moving under high loads and stresses.

Are there any special installation requirements for small block chevy head bolts?

There are no special installation requirements for small block chevy head bolts.

How should small block chevy head bolts be torqued during installation?

The small block chevy head bolts should be torqued during installation to 30 ft-lbs.

What are the torque specifications for small block chevy head bolts?

The torque specifications for small block chevy head bolts are as follows: -Stage 1: 18 ft-lbs-Stage 2: 30 ft-lbs-Stage 3: 40 ft-lbs

Conclusion

If you’re looking for the best small block chevy head bolt, look no further! The bolts we offer are made of high quality materials and are durably constructed to withstand the rigors of high performance engines. Plus, our bolts come with a money back guarantee so you can be sure you’re getting the best product for your money.

Leave a Reply

Your email address will not be published. Required fields are marked *

Top