-A new OEM quality pump
-All new seals and O-rings
-A new head assembly with hardened steel valves
-A new cylinder sleeve with honed finish for optimal performance
-All necessary bolts, gaskets, and washers.
This kit also comes with full instructions so you can easily install it yourself. Get your FR350 running like new again with this convenient rebuild kit.
Why Porter Cable Fr350 Rebuild Kit Is Necessary?
Porter cable fr350 rebuild kit is necessary because it helps to keep your porter cable fr350 running like new. Over time, parts will wear out and break down, so it’s important to have a rebuild kit on hand. This way, you can easily and quickly fix your saw when something goes wrong.
Our Top Picks For Porter Cable Fr350 Rebuild Kit
Porter Cable Fr350 Rebuild Kit Guidance
Porter Cable FC350A/FR350A/FM350A OVERHAUL Kit # 910450
If your Porter Cable FC350A/FR350A/FM350A has seen better days and is in need of an overhaul, then this kit is just what you need! Part number 910450, this kit includes everything you need to get your tool up and running again, including a new gasket, O-rings, and more.
This kit is compatible with FC350A Type 1, FC350A Type 2, FM350A Type 1, and FR350A Type 1 models. It measures approximately 800 x 450 x 200 inches.
So don’t delay, get your Porter Cable FC350A/FR350A/FM350A Overhaul Kit today!
Common Questions on Porter Cable FC350A/FR350A/FM350A OVERHAUL Kit # 910450
• What is the depth of the cut with the FR350A?The depth of the cut with the FR350A is 3-9/16 inches.
• What is the weight of the FC350A?
The weight of the FC350A is 10.1 pounds.
• What is the height of the FM350A?
The height of the FM350A is 14-1/2 inches.
• How many amps does the FC350A have?
The FC350A has 7.5 amps.
Why We Like This
• 1. FC350A/FR350A/FM350A OVERHAUL Kit is a genuine OEM replacement part for Porter Cable tools.• 2. Part number 910450.• 3. Compatible with FC350A Type 1, FC350A Type 2, FM350A Type 1, FR350A Type 1.• 4. Measures approximately 800 X 450 X 200 inches.• 5. Made in the USA.
Additional Product Information
| Height | 1.75 Inches |
| Length | 8.25 Inches |
| Weight | 0.05 Pounds |
Piston Bumper Stop 901901 Compatible with Porter Cable FC350 Type 1 Type 2 Type 3 FR350 Type 1 Type 2 Type 3
The piston bumper stop 901901 is a replacement part that is compatible with the Porter Cable FC350 Type 1, FC350 Type 2, and FC350 Type 3 framing nailers. This part acts as a cushion for the piston/driver when it retracts back into the cylinder after being fired. This prevents the piston from being damaged as it strikes the back of the cylinder.
Common Questions on Piston Bumper Stop 901901 Compatible with Porter Cable FC350 Type 1 Type 2 Type 3 FR350 Type 1 Type 2 Type 3
• What is the purpose of a piston bumper stop?The purpose of a piston bumper stop is to provide a cushion for the piston when it reaches the end of its stroke. This helps to prevent damage to the piston and the cylinder.
• What is the difference between a Type 1 and a Type 2 piston bumper stop?
Type 1 piston bumper stops are made of softer material, while Type 2 piston bumper stops are made of harder material. This makes Type 2 piston bumper stops more effective at absorbing shock and preventing damage.
• How do I know if I need a Type 3 piston bumper stop?
If your Porter Cable FC350 or FR350 has a Type 3 cylinder, then you will need a Type 3 piston bumper stop. Type 3 cylinders are larger in diameter than Type 1 or Type 2 cylinders, so a Type 3 piston bumper stop is necessary to provide a proper fit.
Why We Like This
• Piston Bumper Stop 901901 is compatible with Porter Cable FC350 Type 1, FC350 Type 2, FC350 Type 3, and FR350 Type 1, FR350 Type 2, FR350 Type 3• This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired• 1 Pcs Piston Bumper Stop 901901• Made of high quality materials for durability• Easy to install
NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip
When it comes time to tackle a big project, you need a tool that can handle the job. The NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nailer is just such a tool. This versatile and powerful nailer is perfect for a variety of tasks, from framing to installing subfloors. It features a durable magnesium body, an ergonomic secure handle, and a no mar tip. With its depth adjustment and no mar tip, this nailer is adaptable to different surfaces, making it a versatile tool for any job.
Common Questions on NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip
• What are the dimensions of the NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip?The dimensions of the NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip are 3.5 x 11.8 x 13 inches.
• How much does the NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip weigh?
The NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip weighs 5.2 pounds.
• What is the warranty of the NuMax SFR2190 Pneumatic 21 Degree 3-1/2″ Full Round Head Framing Nail
Why We Like This
• Lightweight and durable magnesium body• Ergonomic secure handle• Interchangeable trigger for quick fire or single shot function• Depth adjustment and a no mar tip• Manufactured with the most durable materials under strict quality control guidelines
Additional Product Information
| Height | 20.078740137 Inches |
| Length | 5.511811018 Inches |
| Weight | 8.598028218 Pounds |
901901 Piston Bumper fit for Porter Cable FR350 FC350
When it comes to working on projects that require nailing, you want to have a tool that is not only comfortable to use but also gets the job done quickly and efficiently. The Porter Cable FR350 FC350 is a nail gun that fits this description perfectly. It is a reliable tool that is built to last, and it features a number of great design elements that make it a joy to use.
One of the most important parts of any nail gun is the piston. This is the part of the gun that actually fires the nails, and it needs to be in good working condition in order to avoid any accidents or mishaps. The piston bumper is a small but essential part of the gun, and it helps to cushion the piston as it retracts back into the cylinder after being fired. This prevents the gun from becoming damaged or malfunctioning over time, and it helps to ensure that the gun always works as intended.
If you are looking for a high-quality piston bumper that will fit your Porter Cable FR350 FC350 nail gun, then you will want to consider the 901901 model. This part is designed specifically for use with the Porter Cable nail gun, and it is made from high-quality materials that will withstand the rigors of daily
Common Questions on 901901 Piston Bumper fit for Porter Cable FR350 FC350
• What is the function of a piston bumper?A piston bumper is a component of a pneumatic or hydraulic system that cushions the piston as it moves back and forth, helping to prevent metal-to-metal contact that could damage the system.
• What are the dimensions of the 901901 piston bumper?
The 901901 piston bumper has a diameter of 1 inch and a height of 0.25 inches.
• What is the material of the 901901 piston bumper?
The 901901 piston bumper is made of black neoprene rubber.
• What is the maximum operating pressure for the 901901 piston bumper?
The 901901 piston bumper has a maximum operating pressure of 150 psi.
• What is the minimum operating temperature for the 901901 piston bumper?
The 901901 piston bumper has a minimum operating temperature of -20 degrees Fahrenheit.
Why We Like This
This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired.
This Piston Bumper is located Cylinder Cap of nail guns.
Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model.
This part is made of high quality materials and is built to last.
This part is easy to install and is a direct replacement for the old or broken part.
PU Collar 910767 Compatible With Porter Cable Air Nailer Collar FC350A Type 1 FC350A Type 2 FM350A Type 1 FR350A Type 1
The PU Collar 910767 is a compatible replacement part for the Porter Cable Air Nailer Collar FC350A Type 1 and FC350A Type 2. It is also compatible with the FM350A Type 1 and FR350A Type 1. This product has an outside diameter of 307″ and an inside diameter of 226″. The height is 045″.
Common Questions on PU Collar 910767 Compatible With Porter Cable Air Nailer Collar FC350A Type 1 FC350A Type 2 FM350A Type 1 FR350A Type 1
• What is the purpose of the PU Collar 910767 Compatible With Porter Cable Air Nailer Collar FC350A Type 1 FC350A Type 2 FM350A Type 1 FR350A Type 1?The PU Collar 910767 is used to prevent air from leaking out of the nailer.
• What are the dimensions of the PU Collar 910767 Compatible With Porter Cable Air Nailer Collar FC350A Type 1 FC350A Type 2 FM350A Type 1 FR350A Type 1?
The dimensions of the PU Collar 910767 are 10.5 x 8.5 x 2.5 cm.
• What is the weight of the PU Collar 910767 Compatible With Porter Cable Air Nailer Collar FC350A Type 1 FC350A Type 2 FM350A Type 1 FR350A Type 1?
The weight of the PU Collar 910767 is 0.11 kg.
• What is the compatible Porter Cable air nailer model number for the PU Collar 910767?
The PU Collar 910767 is compatible with the Porter Cable air nailer
Why We Like This
• 1. Replaces part number 910767• 2. Compatible with Porter Cable FC350A Type 1 and Type 2 framing air nailers, as well as the FM350A Type 1 air nailer• 3. Also compatible with the FR350A Type 1 framing air nailer• 4. Outside diameter is 307″• 5. Inside diameter is 226″
Benefits of Porter Cable Fr350 Rebuild Kit
If your Porter Cable FR350 nail gun isn’t working as it should, a rebuild kit can help get it back to its original condition. These kits come with all the necessary parts and instructions for performing a complete tune-up on your nailer.
A Porter Cable FR350 rebuild kit can extend the life of your nail gun and make it work like new again. It’s an affordable way to keep your favorite tool in top shape.
Buying Guide for Porter Cable Fr350 Rebuild Kit
When looking for a porter cable fr350 rebuild kit, you will want to find one that includes all of the necessary parts and instructions for rebuilding your Porter Cable FR350 Nail Gun. Most kits will include a new o-ring set, seals, springs, and an assembly guide. Some may also come with a replacement trigger and/or driver blade. You will want to make sure that the kit you purchase has all of the parts that you need, as well as easy to follow instructions. Once you have your rebuild kit, simply follow the step-by-step assembly guide included in order to properly rebuild your nail gun.
Frequently Asked Question
What are the contents of a porter cable fr350 rebuild kit?
The porter cable fr350 rebuild kit contains all the o-rings, gaskets, seals, and other small parts needed to rebuild the pneumatic nail gun.
How do you install a rebuild kit on a porter cable fr350?
There are a few different ways to install a rebuild kit on a porter cable fr350, but the most common and straightforward method is to simply follow the instructions that come with the kit.
How often should you rebuild your porter cable fr350?
A good rule of thumb is to rebuild the tool every two to three years, or sooner if it begins to show signs of wear.
What are the symptoms of a porter cable fr350 in need of a rebuild?
The symptoms of a porter cable fr350 in need of a rebuild are a loss of power, a decrease in performance, and a decline in fuel efficiency.
What are the benefits of rebuilding your porter cable fr350?
There are many benefits to rebuilding your porter cable fr350. Some of these benefits include: 1. You will save money by doing it yourself. 2. You will be able to customize your porter cable fr350 to your own personal preferences. 3. You will be able to use higher quality materials than what comes standard with the porter cable fr350. 4. You will be able to extend the life of your porter cable fr350 by rebuilding it. 5. You will be able to increase the performance of your porter cable fr350 by rebuilding it.
Conclusion
The Porter Cable FR350 Rebuild Kit is a must-have for any homeowner or contractor who owns a porter cable fr350. This kit includes everything you need to rebuild your fr350, including a new piston, cylinder, o-rings, and gaskets. The Porter Cable FR350 Rebuild Kit is an easy way to keep your fr350 running like new, and it’s a great value for the price.
