What Size Heater Hose Do You Need? A Guide to Choosing the Right Size Heater Hose

When it comes to finding the right size of a heater hose for your car, it can be daunting and perplexing. To make sure you get the correct size, it’s important to understand the full range of options available and to know what kind of burstiness to expect. This guide will provide you with all the information you need to select the right size of heater hose for your car, helping you to avoid any potential confusion or mistakes along the way.

Why ls Heater Hose Size Is Necessary?

The size of a heater hose is necessary to ensure that the proper amount of coolant is able to flow through the system. If the heater hose is too small, it will restrict the flow of coolant, which can cause the engine to overheat. Additionally, a too-small hose may be unable to handle the pressure created by the cooling system and can burst or leak. A too-large hose can also cause problems by allowing more coolant than needed to pass through, which can cause damage to other components in the engine. The proper size heater hose ensures that your vehicle runs at optimal temperature and performance.

Comperision Chart for ls heater hose size

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

LS Swap Heater Hose Set 90 Degree Molded Heater Hose - 5/8

PRODUCT NAME

LS Swap Heater Hose Set 90 Degree Molded Heater Hose – 5/8″ ID & 3/4″ ID, 4″ x 24″ Length, Black

10
PRODUCT IMAGE
2

ICT Billet USA Made 60

PRODUCT NAME

ICT Billet USA Made 60″ LS Swap Heater Core Hose Set LS1 LSX LS2 LS3 LQ4 Kit Coolant 551065

10
PRODUCT IMAGE
3

LS Heater Core Bypass Hose Coolant Crossover by Corvette Envy for LS LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4

PRODUCT NAME

LS Heater Core Bypass Hose Coolant Crossover by Corvette Envy for LS LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4

7
PRODUCT IMAGE
4

PQY Heater Core Crossover Coolant Bypass Hose 5/8

PRODUCT NAME

PQY Heater Core Crossover Coolant Bypass Hose 5/8″ End and 3/4″ End with 2PCS Clamps for LS for LT

10
PRODUCT IMAGE
5

ICT Billet LS Heater Core Bypass Hose Coolant Crossover LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551699

PRODUCT NAME

ICT Billet LS Heater Core Bypass Hose Coolant Crossover LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551699

9

LS Swap Heater Hose Set 90 Degree Molded Heater Hose – 5-8 ID & 3-4 ID 4 x 24 Length, Black

 LS Swap Heater Hose Set 90 Degree Molded Heater Hose - 5-8 ID & 3-4 ID 4 x 24 Length, Black

Check Price on Amazon

If youre looking for a top-notch LS Swap Heater Hose Set, look no further than the LS Swap Heater Hose Set 90 Degree Molded Heater Hose. This heater hose set comes with two hoses one 5/8 ID and one 3/4 ID both measuring 4 x 24 in length and are black in color. With this set, you can easily install the hoses in tight clearance applications on the passenger side of the engine bay due to their 90 degree molded shape.

Why We Like This
Comes with two hoses one 5/8 ID and one 3/4 ID
Both measure 4 x 24 in length
Black in color
90 degree molded shape makes installation easy and simple
Great for tight clearance applications on the passenger side of the engine bay

Common Questions & Answers
Q: What is included in this set?
A: The LS Swap Heater Hose Set 90 Degree Molded Heater Hose includes 1pc 5/8″ I.D. heater hose and 1pc 3/4″ I.D. heater hose.

Q: Does it come with any other accessories?
A: No, this set only includes the two hoses as mentioned above. No other accessories are included.

Q: Is it easy to install?
A: Yes, due to its 90 degree molded design, installing these hoses is easy and simple even in tight clearance applications on the passenger side of the engine bay.

Additional Product Information

Size 5/8″+3/4″ ID

ICT Billet USA Made 60 LS Swap Heater Core Hose Set LS1 LSX LS2 LS3 LQ4 Kit Coolant 551065

 ICT Billet USA Made 60 LS Swap Heater Core Hose Set LS1 LSX LS2 LS3 LQ4 Kit Coolant 551065

Check Price on Amazon

If you’re looking for a great way to upgrade your LS/LT swap and keep your heater core in great condition, then look no further than the ICT Billet USA Made 60″ LS Swap Heater Core Hose Set. This high-quality set of hoses is perfect for making sure your LS or LT swap goes off without a hitch. The hoses are compatible with all OEM LS and LT water pump outlet hose sizes and are made in the USA, so you know theyre of the highest quality. Plus, they come in a handy 60 inch length that gives you plenty of room to get the job done right.

Why We Like This
USA made, high quality hoses
Great for doing LS/LT swaps when retaining the heater core
Compatible with all OEM LS and LT water pump outlet hose sizes
60 inch hoses
Package includes: 1pc 5/8 I.D. hose and 1pc 3/4 I.D. hose

Common Questions & Answers
Q: What is included in this set?
A: The ICT Billet USA Made 60″ LS Swap Heater Core Hose Set includes one 5/8 inch inside diameter (I.D.) hose and one 3/4 inch I.D. hose.
Q: Is this set compatible with all OEM LS and LT water pump outlet hose sizes?
A: Yes, it is compatible with all OEM LS and LT water pump outlet hose sizes.
Q: Does this set come with any other accessories?
A: No, it does not come with any other accessories; just the two hoses as described above

Additional Product Information

Height 5.7
Length 10.4
Width 10.5

LS Heater Core Bypass Hose Coolant Crossover by Corvette Envy for LS LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4

 LS Heater Core Bypass Hose Coolant Crossover by Corvette Envy for LS LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4

Check Price on Amazon

5 Bullet points: 3 Common Questions & Answers

The LS Heater Core Bypass Hose Coolant Crossover by Corvette Envy is an amazing product that delivers superior performance and pressure resistance. It’s perfect for those who own a LS / LT Swap (Gen III, IV, V) and need to get the job done right. The hose comes with 5/8″ and 3/4″ Hose Ends and two clamps are included, making installation easy. The silicone hose ensures a tight fit, so you won’t have to worry about leaks.

Why We Like This
Easy to install – With 5/8″ and 3/4″ Hose Ends included as well as two clamps, installation is a breeze.
Superior Performance – The silicone hose provides superior pressure resistance and overall performance compared to other materials.
Perfect for LS / LT Swaps – Whether you have a Gen III, IV or V swap, this product is perfect for you.
Durable – The high-quality silicone material ensures this product will last for years to come.
Affordable Price – You won’t have to break the bank for this amazing product!

Common Questions & Answers
Q: Is the LS Heater Core Bypass Hose Coolant Crossover by Corvette Envy easy to install?
A: Yes, the product comes with 5/8″ and 3/4″ Hose Ends as well as two clamps making installation extremely easy.
Q: What kind of performance can I expect from this product?
A: You can expect superior performance due to its pressure resistance and overall better performance when compared with other materials.
Q: Is it suitable for LS / LT Swaps (Gen III, IV, V)?
A: Yes, this product is perfect for those who own a LS / LT Swap (Gen III, IV or V).

Additional Product Information

PQY Heater Core Crossover Coolant Bypass Hose 5-8 End and 3-4 End with 2PCS Clamps for LS for LT

 PQY Heater Core Crossover Coolant Bypass Hose 5-8 End and 3-4 End with 2PCS Clamps for LS for LT

Check Price on Amazon

The PQY Heater Core Crossover Coolant Bypass Hose is a great addition to any LS or LT engine. This hose is made of high quality silicone and comes with two stainless steel clamps for easy installation. It has an oil, coolant and fuel-resistant finish, making it easy to clean. The hose ends measure 5/8″ and 3/4″ respectively, making it compatible with 98-up LS LT GEN 3 4 5 engines.

Why We Like This
High quality silicone construction with two stainless steel clamps
Oil, coolant and fuel-resistant finish
Hose ends measure 5/8″ and 3/4″ respectively
Compatible with 98-up LS LT GEN 3 4 5 engines
Easy to install and clean

Common Questions & Answers
Q: Does the PQY Heater Core Crossover Coolant Bypass Hose come with clamps?
A: Yes, it comes with two stainless steel clamps for easy installation.
Q: What are the dimensions of the hose ends?
A: The hose ends measure 5/8″ and 3/4″ respectively.
Q: Is this product compatible with 98-up LS LT GEN 3 4 5 engines?
A: Yes, it is compatible with these engines.

Additional Product Information

ICT Billet LS Heater Core Bypass Hose Coolant Crossover LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551699

 ICT Billet LS Heater Core Bypass Hose Coolant Crossover LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551699

Check Price on Amazon

If you’re looking for a reliable and efficient way to loop the heater hose outlets of your LS/LT engine water pump, then the ICT Billet LS Heater Core Bypass Hose Coolant Crossover is the perfect solution. This custom molded heavy duty hose offers the tightest bend radius on the market, making it a great choice for those that want to get the job done quickly and easily. Compatible with all LS or LT series engines from 1998 and newer, this bypass hose is designed specifically for vehicles that are no longer using the heater core.

Why We Like This
Tightest bend radius available
Custom molded heavy duty hose
Compatible with all LS or LT series engines from 1998 and newer
Designed specifically for vehicles without a heater core
Includes 1 black rubber hose

Common Questions & Answers
Q: What type of engine can I use this hose on?
A: The ICT Billet LS Heater Core Bypass Hose Coolant Crossover is compatible with all LS or LT series engines from 1998 and newer.
Q: Is this hose suitable for vehicles without a heater core?
A: Yes, this bypass hose is designed specifically for vehicles that are no longer using the heater core.
Q: What is included in this package?
A: This package includes 1 black rubber hose.

Additional Product Information

Height 1.1
Length 4.4
Weight 0.14
Width 3.2

Benefits of LS Heater Hose Size

1. Improved Cooling Efficiency: A larger LS heater hose size can increase the flow rate of coolant, allowing the engine to stay cooler and run more efficiently.
2. Increased Durability: The larger diameter allows for a thicker wall which increases the lifespan of the hose.
3. Reduced Maintenance Costs: A larger LS heater hose size reduces the chances of a coolant leak occurring, saving you money in repair costs.
4. Improved Fitment: The larger diameter allows for a better fit when connecting hoses to components, ensuring a secure connection with no leaks.

Buying Guide for ls heater hose size

Types of Heater Hose Sizes

When selecting a heater hose, its important to consider the size of the hose. The most common sizes are 3/8 and 5/8. The 3/8 hose is ideal for coolant systems that require a smaller diameter, while the 5/8 hose is perfect for larger systems that require more coolant flow.

The two main types of heater hoses are silicone and rubber. Silicone hoses are the most popular choice among automotive enthusiasts due to their superior flexibility and durability. They also resist oil and other harsh chemicals better than rubber hoses. On the other hand, rubber hoses are less expensive and easier to install than silicone hoses.

Factors to Consider When Buying a Heater Hose

When selecting a heater hose, there are several factors you should consider. First, consider the size of your engine’s cooling system and the amount of coolant flow it requires. This will determine whether you need a 3/8 or 5/8 hose.

Next, decide whether you want a rubber or silicone hose. As mentioned above, silicone hoses are more durable and resistant to oil and other chemicals than rubber hoses, but they can be more expensive and difficult to install.

Finally, if you plan on using your heater hose in an environment where temperatures could get extremely high (such as under the hood of your car), then you should opt for a heat-resistant hose. This type of hose is designed to withstand temperatures up to 250F (121C).

Installation Tips
Before installing your new heater hose, make sure that all components in your cooling system (such as clamps and fittings) are properly tightened. If they aren’t tight enough, they could come loose during operation which could result in leaks or even engine damage! Additionally, always wear protective gear when working with automotive fluids such as coolant or gasoline as these can be hazardous if not handled properly.

Where to Buy Heater Hose
Heater hoses can be found at most auto parts stores or online retailers such as Amazon or eBay. When shopping online, make sure that you read customer reviews before buying to ensure that you get a quality product from a reliable seller!

In conclusion, the size of a heater hose is an important factor to consider when replacing a heater hose. The size of a heater hose is determined by measuring the inside diameter of the hose. When selecting a replacement heater hose, it is important to select one with the same or larger inside diameter as the original heater hose. This will ensure that the new hose can handle the same amount of coolant as the original.

Top