Why Lg Washer Rotor Position Sensor Switch Is Necessary?
A LG washer rotor position sensor switch is a critical part of the washing machine as it tells the control board where the tub is and if it is spinning. If this sensor fails, the washer will not operate.
Comparison Table for Lg Washer Rotor Position Sensor Switch
Lg Washer Rotor Position Sensor Switch Guidance
6501KW2002A Rotor Position Sensor Switch OEM by Beaquicy – Replacement for Ken-More L-G Washing Machine
If your washing machine’s rotor position sensor is broken, it can cause a variety of problems. The most common symptom is that the machine will not spin or agitate. Other symptoms include the machine not starting, or the pump not working.
Replacing the rotor position sensor is a relatively easy repair that can be done in a few minutes with a screwdriver and a pair of work gloves. Simply disconnect the old sensor from the washer and remove it. Then, connect the new sensor in its place and secure it with the screw.
Be sure to cut off power to the machine and shut off the water before beginning this repair. Once the new sensor is in place, turn on the power and water and run a test load of laundry to ensure that the machine is working properly.
Common Questions on 6501KW2002A Rotor Position Sensor Switch OEM by Beaquicy – Replacement for Ken-More L-G Washing Machine
• What is the Beaquicy 6501KW2002A Rotor Position Sensor Switch OEM?The Beaquicy 6501KW2002A Rotor Position Sensor Switch is an OEM (Original Equipment Manufacturer) replacement part for Ken-More L-G washing machines.
• What is the function of the Beaquicy 6501KW2002A Rotor Position Sensor Switch?
The Beaquicy 6501KW2002A Rotor Position Sensor Switch is responsible for sensing the position of the washing machine’s rotor and sending a signal to the control board to indicate the rotor’s position.
• How do I replace the Beaquicy 6501KW2002A Rotor Position Sensor Switch?
To replace the Beaquicy 6501KW2002A Rotor Position Sensor Switch, first disconnect the power to the washing machine. Next, remove the cabinet panel to access the sensor. Remove the sensor’s mounting bracket and wiring harness, and then pull the sensor out of the rotor. Install the new sensor in the same position and reattach the mounting bracket, wiring harness, and cabinet panel. Finally, restore power to the washing machine.
Why We Like This
• 1. The Motor Rotor Position Sensor 6501KW2002A is for washers• 2. Washer Rotor Position Sensor 6501KW2002A monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board• 3. It is commonly referred to as a RPS (rotor position sensor) or MPS (motor position sensor)• 4. Product includes 1 x 6501KW2002A position sensor• 5. The Rotor Position Sensor is approximately 29 inches in length, 22 inches in width
6501KW2002A 6501KW2002B Washer Motor Rotor Position Sensor Switch Compatible with Kenmore LG Washer Washing Machine Replaces AP4440680 PS3529186, Upgraded RPS Hall Sensor OEM Replacement Parts
The 6501KW2002A and 6501KW2002B are washing machine motor rotor position sensor switches that are compatible with LG and Kenmore washing machines. These switches sense the position of the motor and communicate this information to the control board. If your washer is not starting, spinning slowly, or having “EO” or “LE” error codes, it is likely that the rotor position sensor is faulty and needs to be replaced. This part is made of premium quality material and is well-tested by the manufacturer. It is an exact equivalent for the following part numbers: AP4440680, 1268238, AH3529186, EA3529186, PS3529186. Installation is easy and only takes a few minutes. Simply disconnect the electric, hot, and cold water supply and drain hose and lay the washer on its back. Remove the nut from the center housing and the screws from the starter. Disconnect the wires with a flat screwdriver at the sensor and starter. Install the new sensor and put everything back together.
Common Questions on 6501KW2002A 6501KW2002B Washer Motor Rotor Position Sensor Switch Compatible with Kenmore LG Washer Washing Machine Replaces AP4440680 PS3529186, Upgraded RPS Hall Sensor OEM Replacement Parts
• What is the dimensions of the 6501KW2002A 6501KW2002B Washer Motor Rotor Position Sensor Switch Compatible with Kenmore LG Washer Washing Machine Replaces AP4440680 PS3529186, Upgraded RPS Hall Sensor OEM Replacement Parts?The dimensions of the 6501KW2002A 6501KW2002B Washer Motor Rotor Position Sensor Switch Compatible with Kenmore LG Washer Washing Machine Replaces AP4440680 PS3529186, Upgraded RPS Hall Sensor OEM Replacement Parts are W:3.9 x L:3.9 x H:1.8 inches.
• What is the voltage of the 6501KW2002A 6501KW2002B Washer Motor Rotor Position Sensor Switch Compatible with Kenmore LG Washer Washing Machine Replaces AP4440680 PS3529186, Upgraded RPS Hall Sensor OEM Replacement Parts?
The voltage of the 6501KW2002A 6501KW2002B Washer Motor Rotor Position Sensor Switch Compatible with Kenmore LG Washer Washing Machine Replaces AP4440680 PS3529186, Upgraded RPS Hall Sensor OEM
Why We Like This
• 1. The 6501KW2002A Washer Motor Rotor Position Sensor Switch is a high quality exact equivalent for part numbers AP4440680, 1268238, AH3529186, EA3529186, PS3529186.• 2. The 6501KW2002A Washer Motor Rotor Position Sensor Switch monitors the direction and speed of the spinning rotor and communicates these to the electronic control board.• 3. This part senses the position of the motor, commonly referred to as an RPS (rotor position sensor) or MPS (motor position sensor).• 4. The 6501KW2002A Washer Motor Rotor Position Sensor Switch is compatible with LG WM0532HW, WM1832CW, WM2016CW, WM2101HW, WM2240CW, WM2301HR, WM2455HG, WM2487HWM, WM2801HRA, WM2801HWA, WM3050CW, WM3170CW, WM3370HWA, WM3570HWA, WM3575CW, WM4270HVA, WM4270HWA, WM8000HVA, WM8500HVA etc [Kenmore]
Additional Product Information
| Color | White |
| Height | 1.1 Inches |
| Length | 2.87 Inches |
| Weight | 0.09 Pounds |
tikumik 6501KW2002A Washer Rotor Position Sensor Switch – Compatible with LG Washers – Replaces AP4440680, 1268238, AH3529186, EA3529186, PS3529186
If your washer won’t start, rotate or agitate, you may need to replace the rotor position sensor. The RPS (rotor position sensor) monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. This part senses the position of the motor, so it’s commonly referred to as a RPS (rotor position sensor) or MPS (motor position sensor). When it goes bad, your washer may display the error code LE. Order this replacement part today and have your washing machine up and running again in no time.
Common Questions on tikumik 6501KW2002A Washer Rotor Position Sensor Switch – Compatible with LG Washers – Replaces AP4440680, 1268238, AH3529186, EA3529186, PS3529186
• What are the dimensions of the Tikumik 6501KW2002A Washer Rotor Position Sensor Switch?The Tikumik 6501KW2002A Washer Rotor Position Sensor Switch is 3 inches in length, 2 inches in width, and 1 inch in height.
• What is the weight of the Tikumik 6501KW2002A Washer Rotor Position Sensor Switch?
The Tikumik 6501KW2002A Washer Rotor Position Sensor Switch weighs 0.1 pounds.
• What is the function of the Tikumik 6501KW2002A Washer Rotor Position Sensor Switch?
The Tikumik 6501KW2002A Washer Rotor Position Sensor Switch is used to sense the rotational position of the wash tub in LG washing machines.
• What are the compatible models for the Tikumik 6501KW2002A Washer Rotor Position Sensor Switch?
The Tikumik 6501KW2002A Washer Rotor Position Sensor Switch is compatible with the following LG washing machine models: WM2277HW, WM2377HW, and WM2477H
Why We Like This
• 1. Compatible with LG and Kenmore washers• 2. Replaces 1268238, AP4440680, PS2394359, EAP2394359• 3. Monitors the direction and speed of the spinning rotor• 4. Made from durable high quality material• 5. Fixes the following symptoms: Pumps but will not spin, Will not agitate, Will not start
Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186
When your LG washer isn’t starting up, there could be a problem with the rotor position sensor switch assembly. The LP2002A Washer Rotor Position Sensor Switch Assembly from Supco is designed to meet or exceed OEM specifications, and is manufactured on the same production lines as the OEM parts. This sensor switch is designed & engineered by Supco to fix the following problem:
If your washing machine doesn’t seem to be getting power, or if it’s not starting up, the problem may lie in the rotor position sensor switch assembly. This switch is responsible for telling the washing machine when the door is closed and locked, and when the tub is in the correct position for washing. If this switch is damaged or not working properly, it can prevent the washing machine from starting up.
The Supco LP2002A Washer Rotor Position Sensor Switch Assembly is an easy to install replacement for the OEM part. It’s designed to fit LG washing machines, and is a direct replacement for the LG 6501KW2002A, AP4440680, and PS3529186.
If your LG washing machine isn’t starting up, check the rotor position sensor switch assembly. The Supco LP2002A Washer Rotor Position Sensor Switch Assembly
Common Questions on Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186
• What are the dimensions of the Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186?The Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186 is 6.5″ x 4.5″ x 3″.
• What is the weight of the Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186?
The Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186 is 0.13 lbs.
• What is the part number for the Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186?
The part number for the Supco LP2002A Washer Rotor Position Sensor Switch Assembly For LG 6501KW2002A, AP4440680, PS3529186 is LP2002A.
Why We Like This
Compatible with LG washers
OEM quality
Exact fit
Easy installation
Affordable
Additional Product Information
| Height | 2.875 Inches |
| Length | 2.125 Inches |
6501KW2002A Rotor Position Sensor Switch Exact Replacement for Kenmore Lg Washing Machine (1)
There are a few things that could cause your washing machine to stop working. One possibility is that the motor position sensor has gone bad. The motor position sensor, also known as a rotor position sensor or hall sensor, is responsible for sensing the position of the motor. If this sensor goes bad, it can cause the washing machine to stop working.
If you have a washing machine that is not working, it is worth checking the motor position sensor to see if it is the cause of the problem. The good news is that this is a relatively easy fix. You can purchase a replacement motor position sensor online or at a local appliance store. Once you have the replacement sensor, simply follow the instructions in your washing machine’s owners manual to install it.
Common Questions on 6501KW2002A Rotor Position Sensor Switch Exact Replacement for Kenmore Lg Washing Machine (1)
• What is the part number for the replacement rotor position sensor switch for the Kenmore LG washing machine?The part number is 6501KW2002A.
• How do you install the replacement rotor position sensor switch?
Installation instructions can be found in the manual that came with your washing machine.
• How do you know if the replacement rotor position sensor switch is working?
The best way to test it is to use a multimeter. Once you have installed the new switch, test it for continuity.
Why We Like This
• 1. Durable high quality material• 2. Well tested by the manufacturer• 3. Compatible with many washing machine models• 4. Easy to install• 5. Affordable
Benefits of Lg Washer Rotor Position Sensor Switch
If your LG washing machine is not draining properly, one possible cause is a faulty rotor position sensor switch. This switch tells the washer’s computer when the tub is full of water and when it has been drained. Replacing the switch can be done relatively easily, and doing so can extend the life of your washing machine.
Buying Guide for Lg Washer Rotor Position Sensor Switch
When your LG washer is not draining, it could be because the rotor position sensor switch is not working. This switch is responsible for telling the washer when to drain and when to stop draining. If the switch is not working, then the washer will not be able to drain properly. Here are a few things to look for when troubleshooting this issue:
-Make sure that there is nothing blocking the drainage hose. This includes clothing, towels, or anything else that might be caught in the hose.
-If the hose is clear, then check to see if the rotor position sensor switch is defective. You can do this by testing it with a multimeter. If it does not show continuity, then it will need to be replaced.
-Another possibility is that there is something wrong with the wiring between the control board and the sensor switch. This can usually be fixed by replacing any damaged wires or connectors.
Frequently Asked Question
What is the lg washer rotor position sensor switch?
Generally speaking, the lg washer rotor position sensor switch is a switch that is used to detect the position of the washer’s rotor. This information is then used to control the washing cycle.
How does the lg washer rotor position sensor switch work?
The lg washer rotor position sensor switch monitors the position of the washer tub and sends a signal to the electronic control board to indicate the tub’s position.
What are the benefits of using the lg washer rotor position sensor switch?
There are many benefits to using the lg washer rotor position sensor switch. Some of these benefits include: 1. increased efficiency2. longer lasting3. less water and energy usage4. quieter operation
How do I install the lg washer rotor position sensor switch?
If your washer is leaking water from the bottom, the most likely culprit is the washer rotor position sensor switch. The washer rotor position sensor switch is located under the washer tub. To access it, you will need to remove the washer tub. Once you have removed the washer tub, you will see the washer rotor position sensor switch. Simply unscrew it and replace it with a new one.
How do I troubleshoot the lg washer rotor position sensor switch?
If the rotor position sensor switch is not working properly, the washing machine will not be able to properly spin the clothes. To troubleshoot this problem, first check to make sure that the rotor position sensor switch is clean and free of any debris. If the switch is dirty, clean it with a soft cloth. If the switch is still not working properly, try resetting the washing machine by unplugging it from the power outlet and then plugging it back in. If the problem persists, the rotor position sensor switch may need to be replaced.
Conclusion
Thank you for your time. I hope I have answered all of your questions regarding the LG washer rotor position sensor switch. This product is an excellent choice for anyone in the market for a new washing machine. With its innovative design and features, the LG washer is sure to save you time and money while providing a superior wash.
