Why Lg Dryer Gas Valve Solenoid Is Necessary?
Dryer gas valve solenoids are an important part of any dryer. They are responsible for opening and closing the gas valve, which controls the flow of gas to the burner. Without a functioning solenoid, your dryer would be unable to operate correctly.
Comparison Table for Lg Dryer Gas Valve Solenoid
Lg Dryer Gas Valve Solenoid Guidance
LG Electronics 5221EL2002A Dryer Gas Burner Valve
When it comes to your clothes dryer, the gas burner valve is an important piece of the puzzle. This LG Electronics part number 5221EL2002A dryer gas burner valve assembly includes two solenoids and is essential to the proper functioning of your dryer. Refer to your owner’s manual to ensure you are ordering the correct, compatible part for your model.
Common Questions on LG Electronics 5221EL2002A Dryer Gas Burner Valve
• What is the LG Electronics 5221EL2002A Dryer Gas Burner Valve?The LG Electronics 5221EL2002A Dryer Gas Burner Valve is a part of your dryer that controls the flow of gas to the burner.
• Where is the LG Electronics 5221EL2002A Dryer Gas Burner Valve located?
The LG Electronics 5221EL2002A Dryer Gas Burner Valve is located in the control panel of your dryer.
• How does the LG Electronics 5221EL2002A Dryer Gas Burner Valve work?
The LG Electronics 5221EL2002A Dryer Gas Burner Valve opens and closes to allow gas to flow to the burner. When the dryer is turned on, the valve opens to allow gas to flow to the burner. When the dryer is turned off, the valve closes to shut off the flow of gas.
• What are the signs that the LG Electronics 5221EL2002A Dryer Gas Burner Valve needs to be replaced?
If your dryer is not heating up, or if it is taking longer than usual to dry your clothes, the LG Electronics 5221EL2002A
Why We Like This
• 1. OEM part number 5221EL2002A• 2. Gas dryer valve assembly• 3. Two solenoids• 4. Refer to your manual to ensure ordering the correct, compatible part• 5. For use with LG Electronics dryers
Additional Product Information
| Height | 2.5 Inches |
| Length | 4 Inches |
| Weight | 1.1 Pounds |
LG 5221EL2002A Genuine OEM Gas Valve Assembly for LG Gas Dryers
The LG 5221EL2002A Genuine OEM Gas Valve Assembly for LG Gas Dryers is a top quality replacement part that controls the gas supply for the burner assembly. When installing the new valve, be sure to transfer the orifice from the old valve to the new valve. This will ensure that your appliance continues to operate at peak efficiency. Choose Genuine LG OEM Factory parts for your LG appliances to keep them running like new.
Common Questions on LG 5221EL2002A Genuine OEM Gas Valve Assembly for LG Gas Dryers
• What are the dimensions of the LG 5221EL2002A Gas Valve Assembly?The LG 5221EL2002A Gas Valve Assembly has a width of 3 inches, a height of 3 inches, and a depth of 2.5 inches.
• What is the weight of the LG 5221EL2002A Gas Valve Assembly?
The LG 5221EL2002A Gas Valve Assembly weighs 1.6 pounds.
• What is the part number of the LG 5221EL2002A Gas Valve Assembly?
The part number of the LG 5221EL2002A Gas Valve Assembly is 5221EL2002A.
• How many ports does the LG 5221EL2002A Gas Valve Assembly have?
The LG 5221EL2002A Gas Valve Assembly has two ports.
Why We Like This
• 1. Gas valve assembly controls gas supply for burner assembly• 2. Exact OEM replacement part• 3. Durable construction• 4. Easy installation• 5. Follows LG appliance installation instructions
Additional Product Information
| Height | 4.2 Inches |
| Length | 4.1 Inches |
| Weight | 0.85 Pounds |
Exact Fit 279834 Dryer Gas Valve Ignition Solenoid Coil Kit – For Dryers Premium Replacement Part by DR Quality Parts
When your dryer isn’t heating up properly, it’s time to check the gas valve ignition coil. The Exact Fit 279834 Dryer Gas Valve Ignition Solenoid Coil Kit is a premium replacement part that quickly and inexpensively fixes heat issues in your dryer. This easy-to-install kit includes the gas valve, ignition coil, high temperature limit switch, and thermal fuse. It fits most name brand dryers and comes with a 5 year warranty. So if you’re not completely satisfied, you can ask for a replacement or full refund.
Common Questions on Exact Fit 279834 Dryer Gas Valve Ignition Solenoid Coil Kit – For Dryers Premium Replacement Part by DR Quality Parts
• What is the purpose of the Exact Fit 279834 Dryer Gas Valve Ignition Solenoid Coil Kit – For Dryers Premium Replacement Part by DR Quality Parts?The Exact Fit 279834 Dryer Gas Valve Ignition Solenoid Coil Kit – For Dryers Premium Replacement Part by DR Quality Parts is designed to replace a damaged or faulty solenoid coil in a gas dryer.
• How do I know if my dryer needs a new solenoid coil?
If your dryer is not igniting or heating properly, it may be due to a faulty solenoid coil.
• How do I install the Exact Fit 279834 Dryer Gas Valve Ignition Solenoid Coil Kit – For Dryers Premium Replacement Part by DR Quality Parts?
Installation is simple and only takes a few minutes. Just remove the old solenoid coil and replace it with the new one.
• What are the dimensions of the Exact Fit 279834 Dryer Gas Valve Ignition Solenoid Coil Kit – For Dryers Premium Replacement Part by DR Quality Parts?
The Exact Fit 279834 Dryer Gas Valve
Why We Like This
• 1. Replaces Gas Dryer Valve Coil Kit Part Number 279834 AP3094251 PS334310 12001349• 2. Saves time and money• 3. Fixes heat issues• 4. Easy installation• 5. 5 year warranty
Additional Product Information
| Color | Black |
| Height | 1 Inches |
| Length | 2 Inches |
338906 Flame Sensor & 279834 Gas Valve Solenoid & 3392519 Thermal Fuse Dryer Replacement Part Compatible with Whirlpool Kenmore May.tag Dryers
The 338906 Flame Sensor, 279834 Gas Valve Solenoid, and 3392519 Thermal Fuse are high-quality replacement parts for your Whirlpool, Kenmore, Maytag dryer. These parts are essential to the proper functioning of your dryer, and if one stops working, they should all be replaced as a set. The flame sensor senses heat from the igniter, allowing the gas valve to open. The thermal fuse is located on the blower housing next to the blower fan, and if the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running. The gas valve coil set comprises one primary coil and one safety coil. If one stops working, they should both be replaced. Installation of these parts is easy, and Funmit offers a 100% satisfaction guarantee on all our products.
Common Questions on 338906 Flame Sensor & 279834 Gas Valve Solenoid & 3392519 Thermal Fuse Dryer Replacement Part Compatible with Whirlpool Kenmore May.tag Dryers
• What are the dimensions of the 338906 Flame Sensor & 279834 Gas Valve Solenoid & 3392519 Thermal Fuse Dryer Replacement Part Compatible with Whirlpool Kenmore May.tag Dryers?The dimensions of the 338906 Flame Sensor & 279834 Gas Valve Solenoid & 3392519 Thermal Fuse Dryer Replacement Part Compatible with Whirlpool Kenmore May.tag Dryers are 6.5 x 4.5 x 2.5 inches.
• What is the maximum temperature the 338906 Flame Sensor & 279834 Gas Valve Solenoid & 3392519 Thermal Fuse Dryer Replacement Part Compatible with Whirlpool Kenmore May.tag Dryers can reach?
The maximum temperature the 338906 Flame Sensor & 279834 Gas Valve Solenoid & 3392519 Thermal Fuse Dryer Replacement Part Compatible with Whirlpool Kenmore May.tag Dryers can reach is 1400 degrees Fahrenheit.
• What is the function of the 338906 Flame Sensor & 279834 Gas Valve Solenoid & 3392519 Thermal Fuse Dryer Replacement Part Compatible with Whirlpool Kenmore May.tag Dry
Why We Like This
• 1. WP338906 gas dryer flame sensor• 2. WP3392519 thermal fuse• 3. 279834 gas valve coil set• 4. Compatible with Whirlpool, Kenmore, Admiral, Amana, Caloric, Crosley, Estate, Inglis, Jenn Air, Kitchen Aid, Magic Chef, Maytag, Norge, Roper, Speed Queen dryers• 5. Installation can be completed in just a few steps
338906 Gas Dryer Flame Sensor 279834 Gas Valve Solenoid Coils 279311 Ignitor Kit by Blutoget – Gas Dryer Repair Kit – Compatible with Whirlpool, Ken-more Dryers – Replaces WP338906 AP3094251 PS334310
The Blutoget 338906 gas dryer repair kit can help you fix many dryer issues such as no heat, not enough heat, will not start, takes too long to dry, and shuts off too soon. This kit includes a flame sensor, two gas valve coils, and an igniter. Each part is made from high-quality materials for long-lasting use. Installation is easy, but be sure to disconnect all power sources and wear work gloves to protect your hands. With this kit, you can save time and money on costly repairs.
Common Questions on 338906 Gas Dryer Flame Sensor 279834 Gas Valve Solenoid Coils 279311 Ignitor Kit by Blutoget – Gas Dryer Repair Kit – Compatible with Whirlpool, Ken-more Dryers – Replaces WP338906 AP3094251 PS334310
• What is the maximum temperature that the Blutoget Gas Dryer Flame Sensor can withstand?The Blutoget Gas Dryer Flame Sensor can withstand temperatures up to 500 degrees Fahrenheit.
• What is the function of the Blutoget Gas Valve Solenoid Coils?
The Blutoget Gas Valve Solenoid Coils are responsible for opening and closing the gas valve in order to control the flow of gas to the burner.
• What is the minimum operating temperature of the Blutoget Ignitor Kit?
The Blutoget Ignitor Kit has a minimum operating temperature of -40 degrees Fahrenheit.
Why We Like This
• 1. This Gas Dryer Repair Kit includes a 338906 flame sensor, two 279834 gas valve coils, and a 279311 gas dryer igniter.• 2. The 338906 flame sensor senses the heat in the flame to open the gas valve.• 3. The 279834 gas valve coils open the gas valve for the flame to start.• 4. The 279311 gas dryer igniter is a flat style igniter.• 5. This Gas Dryer Repair Kit is compatible with Whirlpool, KitchenAid, Maytag, Amana, Kenmore, and most top dryers.
Benefits of Lg Dryer Gas Valve Solenoid
A dryer gas valve solenoid is a small metal coil that opens and closes the gas valve to your dryer. When electricity flows through the coil, it creates a magnetic field that opens the gas valve. This allows natural or propane gas to flow into the burner assembly. The solenoid then shuts off the flow of gas when the current is no longer flowing through the coil, which prevents any dangerous Gas Leaks.
The main benefit of having a dryergasvalvesolenoid installed is that it protects your home fromnaturalorpropanegases leaks—two gases that can be very dangerous if they accumulate in an enclosed space like your laundry room or garage.
Buying Guide for Lg Dryer Gas Valve Solenoid
If your LG dryer isn’t heating up, one possible reason is that the gas valve solenoid is defective. This part controls the flow of gas to the burner. A defective solenoid can prevent the dryer from igniting, or it can cause the flame to go out while the dryer is running.
Here’s how to test your LG dryer’s gas valve solenoid:
1. Unplug your dryer from the power outlet.
2. Locate the gas valve solenoids on the back of the dryer (there are two).
3. Use a multimeter to test each solenoid for continuity. If there is no continuity, then replace both solenoids.
Frequently Asked Question
What are the symptoms of a failing gas valve solenoid on a LG dryer?
If the gas valve solenoid is failing, the dryer may not start, or it may start and then stop unexpectedly. The dryer may also produce a burning smell.
What are the most common causes of a gas valve solenoid failure on a LG dryer?
There are several possible causes for a gas valve solenoid failure on a LG dryer. The most common include a power surge, a faulty igniter, or a problem with the gas supply line.
How can you test the gas valve solenoid to see if it is defective?
To test the gas valve solenoid, you will need a multimeter. First, remove the wires from the solenoid. Next, set the multimeter to the ohms setting and place the probes on the terminals of the solenoid. If the multimeter reads infinite resistance, then the solenoid is defective and will need to be replaced.
How do you replace a gas valve solenoid on a LG dryer?
If your dryer is not working properly, it may be due to a faulty gas valve solenoid. To replace the gas valve solenoid, first disconnect the dryer from the power source. Then, remove the front panel of the dryer to access the gas valve. Next, remove the two screws that hold the gas valve in place and remove the valve. Finally, install the new gas valve and reassemble the dryer.
What are some tips for troubleshooting a gas valve solenoid issue on a LG dryer?
If you are having issues with your gas valve solenoid, there are a few things you can do to troubleshoot the problem. First, check to make sure that there is no debris or build-up on the solenoid itself. If there is, clean it off with a soft cloth. Next, check the electrical connection to the solenoid to make sure it is secure. Finally, check the gas line for any leaks. If you find a leak, you will need to repair it before using the dryer again.
Conclusion
If you are in the market for a new dryer, the LG dryer gas valve solenoid is a great option. It is designed to be very durable and is backed by a 1-year warranty. Additionally, it is one of the most energy-efficient models on the market, which will help to lower your monthly utility bills.
