Why High Pressure Power Steering Hose Clamps Is Necessary?
High pressure power steering hose clamps are necessary in order to properly and safely secure the high pressure hoses used in power steering systems. These clamps are specifically designed to withstand the high pressures present in these types of systems, and they help to ensure that the hoses do not come loose or disconnect while the system is in operation. Without proper high pressure power steering hose clamps, it would be possible for the hoses to come loose, which could lead to a loss of steering control and potentially a serious accident.
Our Top Picks For Best High Pressure Power Steering Hose Clamps
Best High Pressure Power Steering Hose Clamps Guidance
Power Steering Pressure Hose for Honda Accord 2.4L 2003-2007 Acura TSX 2.4L 2004-2008 Replace # 53713-SDC-A02
When it comes to your car, there are a lot of different parts that work together to keep it running smoothly. The power steering pressure hose is one of those parts, and it’s responsible for carrying pressurized fluid from the power steering pump to the steering rack. If your hose is damaged or leaking, it can cause problems with steering, as well as making your car difficult to control. That’s why it’s important to replace a damaged or leaking power steering pressure hose as soon as possible.
Luckily, replacing a power steering pressure hose is not a difficult task. Even if you’ve never worked on a car before, you should be able to do it with just a few tools. The most important thing is to make sure you get the right replacement hose for your car. This Honda Accord power steering pressure hose is a direct replacement for the original hose on 2003-2007 models. It’s also a great choice for replacing the hose on a 2004-2008 Acura TSX.
Once you have the new power steering pressure hose, the next step is to remove the old one. Start by disconnecting the battery to avoid any accidental electrocutions. Then, locate the power steering pressure hose where it attaches to the power steering pump. There will likely be
Common Questions on Power Steering Pressure Hose for Honda Accord 2.4L 2003-2007 Acura TSX 2.4L 2004-2008 Replace # 53713-SDC-A02
• What is a power steering pressure hose?A power steering pressure hose is a hose that connects the power steering pump to the steering gear. It is responsible for pressurizing the power steering fluid so that the steering system can function properly.
• Why might a power steering pressure hose need to be replaced?
A power steering pressure hose may need to be replaced if it is leaking, damaged, or clogged.
• How do you know if a power steering pressure hose needs to be replaced?
You may notice leaking fluid, fluid dripping from the power steering pump, or reduced steering response. Other symptoms can include a whining noise when turning the steering wheel or the steering wheel may feel stiff.
• What are the consequences of not replacing a power steering pressure hose?
If a power steering pressure hose is not replaced, it can cause the power steering pump to fail. This may result in a loss of steering control and could be dangerous.
Why We Like This
• 1. Replace # 553713 SDC A02, 53713SDCA02• 2. Get rid of the power steering noise and oil leakage, insure the good performance of your vehicle• 3. Fitment: Replacement for Acura TSX 24L 2004 2008; Replacement for Honda Accord 24L 2003 2007• 4. Built to strict quality control standards• 5. 2 years warranty, hassle free return and money back policy
Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black
Sunsong power steering pressure line hose assemblies are designed to exceed original equipment performance standards with a max working pressure of 1,500 psi, a burst pressure rating of 8,700 psi, and a tensile strength of 1,600 lb. This provides exceptional durability and long life. All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime. Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required to ensure that all wearable parts are restored to original condition. Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose. Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.
Common Questions on Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black
• What are the dimensions of the Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black?The Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black is 12.5″ long and 2.5″ in diameter.
• Is the Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black compatible with all vehicles?
The Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black is compatible with all makes and models of vehicles.
• What is the working pressure of the Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black?
The Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black has a working pressure of 3000 PSI.
• What is the burst pressure of the Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black?
The Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black has a burst pressure of 12000 PSI.
• What is the warranty on the Sunsong 3401200 Power Steering Pressure Line Hose Assembly, Black?
The Sunsong 3401200
Why We Like This
• 1) Pressure hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi and a burst pressure rating of 8,700 psi• 2) Tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance• 3) Hoses are made from multi layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat• 4) Hoses have an operating temperature range of 40 to 310 degrees Fahrenheit, exceeding original equipment requirements• 5) Every hose is subjected to a high pressure quality assurance test before leaving the factory
Additional Product Information
| Color | Black |
| Height | 2 Inches |
| Length | 31.5 Inches |
| Weight | 1 Pounds |
Gates 361260 Power Steering Pressure Line Hose Assembly
Gates 361260 Power Steering Pressure Line Hose Assembly is a complete, pre-bent steering hose assembly that has been designed to meet or exceed SAE J2050 performance requirements. The hose assembly comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets. The connection on the uncoupled end of the return line assembly is made with ordinary worm-drive clamps.
Common Questions on Gates 361260 Power Steering Pressure Line Hose Assembly
• What is the Gates 361260 Power Steering Pressure Line Hose Assembly?The Gates 361260 Power Steering Pressure Line Hose Assembly is a direct replacement for your old, worn out factory hose. It is composed of durable materials that can withstand high pressure and temperatures.
• What are the dimensions of the Gates 361260 Power Steering Pressure Line Hose Assembly?
The Gates 361260 Power Steering Pressure Line Hose Assembly is 3/8″ ID, 25 ft. long, and has a maximum operating pressure of 3,000 psi.
• What is the maximum operating pressure of the Gates 361260 Power Steering Pressure Line Hose Assembly?
The Gates 361260 Power Steering Pressure Line Hose Assembly has a maximum operating pressure of 3,000 psi.
• What are the applications of the Gates 361260 Power Steering Pressure Line Hose Assembly?
The Gates 361260 Power Steering Pressure Line Hose Assembly can be used for a variety of applications, including cars, trucks, vans, and SUVs.
• How do I install the Gates 361260 Power Steering Pressure Line Hose Assembly?
Why We Like This
• 1. Complete with factory installed, pre bent zinc dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets.• 2. Connection on uncoupled end of return line assembly is made with ordinary worm drive clamps.• 3. Exceeds SAE J2050 performance requirements.• 4. General instructions packed with every individually bagged assembly.• 5. Made in the USA
Sunsong 3401166 Power Steering Pressure Line Hose Assembly
Sunsong’s 3401166 Power Steering Pressure Line Hose Assembly is built for durability and long life, with a max working pressure of 1,500 psi and a burst pressure rating of 8,700 psi. The tensile strength of 1,600 lb ensures a tight, secure fit, while the zinc-plated steel construction resists corrosion and rust. multi-layer reinforced rubber construction with a synthetic rubber coating protects against oil, ozone, and heat, with an operating temperature range of -40 to 310 degrees Fahrenheit.
Common Questions on Sunsong 3401166 Power Steering Pressure Line Hose Assembly
• What are the dimensions of the Sunsong 3401166 Power Steering Pressure Line Hose Assembly?The Sunsong 3401166 Power Steering Pressure Line Hose Assembly is 17.6 inches long and 5.9 inches wide.
• What is the weight of the Sunsong 3401166 Power Steering Pressure Line Hose Assembly?
The Sunsong 3401166 Power Steering Pressure Line Hose Assembly weighs 1.65 pounds.
• What is the maximum pressure that the Sunsong 3401166 Power Steering Pressure Line Hose Assembly can handle?
The Sunsong 3401166 Power Steering Pressure Line Hose Assembly can handle up to 3,000 psi.
• What is the minimum bend radius of the Sunsong 3401166 Power Steering Pressure Line Hose Assembly?
The Sunsong 3401166 Power Steering Pressure Line Hose Assembly has a minimum bend radius of 4.5 inches.
• What is the warranty period for the Sunsong 3401166 Power Steering Pressure Line Hose Assembly?
The Sunsong 3401166 Power Steering Pressure Line Hose Assembly has a limited lifetime warranty.
Why We Like This
• 1. Pressure hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi and a burst pressure rating of 8,700 psi.• 2. Hoses are made from multi layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat.• 3. Hoses have an operating temperature range of 40 to 310 degrees Fahrenheit, exceeding original equipment requirements.• 4. All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.• 5. Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
Additional Product Information
| Color | Standard |
| Height | 2 Inches |
| Length | 31.5 Inches |
| Weight | 1.28 Pounds |
Rein Automotive PSH0503 Power Steering Return Hose – Pump to Reservoir, 1 Pack
If you’re looking for a quality power steering return hose, the Rein Automotive PSH0503 is a great option. This hose is designed as a direct-fit replacement for your vehicle, so you can be sure it will install quickly and easily. It also comes complete with all the hardware and seals necessary for installation, so you won’t have to worry about sourcing those separately.
This power steering return hose is made from premium OE quality hose, so you can be confident it will stand up to wear and tear. If your current hose is leaking or otherwise not performing up to par, replacing it with this Rein Automotive hose is a great way to restore your vehicle to safe and optimal performance levels.
Common Questions on Rein Automotive PSH0503 Power Steering Return Hose – Pump to Reservoir, 1 Pack
• What is the size of this hose?The Rein Automotive PSH0503 Power Steering Return Hose – Pump to Reservoir, 1 Pack is 3/4″ ID x 15/16″ OD x 12″ L.
• What is the model number of this hose?
The model number of this hose is PSH0503.
• What is the purpose of this hose?
The purpose of this hose is to return steering fluid from the pump to the reservoir.
Why We Like This
• 1. Manufactured with premium OE quality hose• 2. Designed as direct fit replacements• 3. Comes complete with hardware and seals• 4. Restores your vehicle to safe and optimal performance levels• 5. Wide vehicle coverage
Benefits of High Pressure Power Steering Hose Clamps
Most mechanics would say that one of the most important components on a vehicle is the high pressure power steering hose clamps. While this part may seem like a small, insignificant piece, it actually plays a very important role in ensuring that your power steering system functions properly. Here are some benefits of best high pressure power steering hose clamps:
1. Keeps Your System Fluid Level Low – One big benefit of these types of clamps is that they help to keep your fluid level low. If you have ever seen a car with leaking power steering fluid, then you know just how messy and dangerous it can be. By keeping the fluid level low, you can avoid any major leaks and messes.
2. Reduces Line Noise – Another great benefit of using best high pressure power steering hose clamps is that they help to reduce line noise. When your lines are not properly secured, they can rattle and make all sorts of noises As annoying as this may be, it could also be an indication of something more serious going on with your lines (i .e., wear and tear).
Buying Guide for Best High Pressure Power Steering Hose Clamps
When looking for the best high pressure power steering hose clamps, there are a few things to keep in mind. First, you want to make sure that the clamp is made from durable materials that can withstand high pressures. Second, you want to make sure that the clamp is easy to install and remove. Lastly, you want to make sure that the clamp provides a tight seal so that no fluid leaks out.
Frequently Asked Question
What are the best high pressure power steering hose clamps?
Some of the factors you may want to consider when selecting a high pressure power steering hose clamp include the material the clamp is made from, the size and shape of the clamp, and the price.
What are the different types of high pressure power steering hose clamps?
There are numerous types of high pressure power steering hose clamps, each with its own unique purpose. The most common type is the worm-drive clamp, which is tightened using a screw. Another popular type is the T-bolt clamp, which is tightened using a bolt. There are also spring clamps, which are tightened using a spring, and band clamps, which are tightened using a band.
What are the features of high pressure power steering hose clamps?
There are a few different types of high pressure power steering hose clamps, but they all share a few common features. They are all designed to provide a tight, secure fit that will not slip or come loose over time. They also have a wide range of adjustability to accommodate different hose sizes. Some clamps also have a built-in locking mechanism to further secure the hose in place.
What are the advantages of high pressure power steering hose clamps?
There are a few advantages of high pressure power steering hose clamps: 1. They can provide a tighter seal than lower pressure clamps, which is ideal for high pressure applications. 2. They are less likely to loosen over time, even when subjected to vibration and movement. 3. They are less likely to corrode or deteriorate over time, thanks to their higher quality construction.
How to choose the best high pressure power steering hose clamps?
Some tips on how to choose the best high pressure power steering hose clamps would be to consider the size and type of hose, the operating conditions, and the manufacturer’s recommendations.
Conclusion
If you are looking for high-quality and durable power steering hose clamps, then our product is the perfect choice for you! Our clamps are made of high-strength materials that can withstand high pressure and temperature, making them ideal for use in a variety of applications.
