If you’re looking to customize your go kart and take it to the next level, a rack and pinion steering kit is an essential upgrade. This kit offers an intuitive way to control your vehicle, allowing you to make quick turns and maneuver your way around the track with ease. The installation process is simple and straightforward, allowing you to enjoy the performance benefits of improved handling and control without any hassle. With its unique combination of perplexity and burstiness, a rack and pinion steering kit will give your go kart the edge you need to stay ahead of the competition.
Why Go Kart Rack and Pinion Steering Kit Is Necessary?
Go karts require a steering system to provide control over the vehicle’s direction. A go kart rack and pinion steering kit is necessary to allow the driver to steer the vehicle easily and accurately. The rack and pinion setup is composed of two main components: a rack, which is a linear gear with teeth on either side, and a pinion gear that meshes with the rack’s teeth to provide rotational motion. By connecting the pinion gear to a steering wheel, the driver can move the pinion gear back and forth within the rack, thereby causing the wheels of the go kart to turn. This steering kit provides smooth, accurate steering for any go kart.
Comperision Chart for go kart rack and pinion steering kit
Niome Go-Kart Steering Wheel Kit, 300mm Steering Wheel 320mm Gear Rack Pinion Adjustable Shaft Set,Assembly Replacement for Go Kart Go Cart ATV UTV 110cc 125cc 140cc 150cc
MOFANS 295mm Go Kart Steering Kit DIY Gear Rack Pinion Adjustable Shaft Set Fit for ATV Go Kart Buggy Quad 110CC Engines
Togarhow 270mm Steering Wheel Assembly with Tie Rod Rack Adjustable Shaft and Front Wheel Hubs with Steering Knuckle Kit Full Steel Off-Road Gear Rack Fit for 110cc 125cc Go Kart Bike(10.6″)
munirater 300mm Steering Wheel Steel Kit 320mm Gear Rack Pinion Adjustable Shaft Set Replacement for 110CC Go Kart
labwork 300mm Steering Wheel Steel Kit 320mm Gear Rack Pinion Adjustable Shaft Set Replacement for 110cc Go Kart
Niome Go-Kart Steering Wheel Kit 300mm Steering Wheel 320mm Gear Rack Pinion Adjustable Shaft Set,Assembly Replacement for Go Kart Go Cart ATV UTV 110cc 125cc 140cc 150cc
:
The Niome Go-Kart Steering Wheel Kit is an essential addition for any go-kart enthusiast. With its durable and wear-resistant metal material and hard black plastic, it is sure to outlast the toughest of rides. The kit includes a 300mm/11.81 inch steering wheel, 32cm/12.59 inch gear rack pinion, and adjustable shaft tie rod, making assembly and installation easy and time-efficient. The ergonomic design ensures a comfortable hand feel, perfect for ATV or go-kart buggy quad such as 110cc 125cc 140cc 150cc. So whether you are a professional or just starting out, the Niome Go-Kart Steering Wheel Kit is the perfect choice for you.
Why We Like This:
Durable and Wear-resistant Metal Material: With its high quality material construction, this steering wheel kit is sure to last through even the toughest rides.
Easy Installation: With its three mounting holes in the center of the steering wheel, this kit makes assembly easy and time-efficient.
Ergonomic Design: Its ergonomic design ensures a comfortable hand feel for your ATV or go-kart buggy quad experience.
Perfect Replacement: Perfect replacement for old wheels on 110cc 125cc 140cc 150cc vehicles.
Wide Application: Can be used on most ATVs or go karts with the right fitment parts.
Common Questions & Answers:
Q1) What size is this steering wheel?
A1) The outside diameter of this steering wheel is 300mm/11.81 inches with a center hole of 18mm/0.71 inches and three mounting holes with a diameter of 7mm/0.28 inches with centre to centre distance of 36mm/1.42 inches.
Q2) Is it suitable for professional use?
A2) Yes! Whether you are a professional or just starting out, this Niome Go-Kart Steering Wheel Kit is perfect for you!
Q3) Is it easy to install?
A3) Absolutely! This kit comes with all necessary components including 30cm steering wheel, 32cm gear rack pinion and adjustable shaft tie rod making installation simple and time efficient!
Additional Product Information
MOFANS 295mm Go Kart Steering Kit DIY Gear Rack Pinion Adjustable Shaft Set Fit for ATV Go Kart Buggy Quad 110CC Engines
Are you looking for a reliable and durable steering kit for your ATV Go Kart Buggy Quad? The MOFANS 295mm Go Kart Steering Kit is the perfect solution! This steering kit is designed to fit 110CC engines, and comes with all the necessary parts for easy installation. The tie rod, rack, and adjustable shaft provide precise control over your vehicle’s movement. Plus, the adjustable length range allows you to customize the fitment to your needs. With its robust design and simple setup, this steering kit is a great choice for all your driving needs.
Why We Like This
Easy Installation: This steering kit comes with all the necessary parts for easy installation. So, you wont have to worry about spending hours in the garage trying to figure out how everything works.
Adjustable Length Range: The adjustable length range allows you to customize the fitment of your vehicle according to your needs. So, youll be able to get just the right amount of control over your vehicles movement.
Durable Design: The robust design of this steering kit ensures that it will stand up to even the most rugged driving conditions. So, you can rest assured that it will last for many years of reliable use.
Fitment: This steering kit is designed to fit 110CC engines and many types of ATV Go Kart Buggy Quad DIYs. So, youll be able to find one that fits your specific vehicle model without any issues.
Affordable Price: Despite its robust design and ease of installation, this steering kit comes at an affordable price. So, you wont have to break the bank in order to get a quality product.
Common Questions & Answers
Q: What is included in this steering kit?
A: This steering kit includes a tie rod, rack, and adjustable shaft for precise control over your vehicle’s movement. Additionally, it also includes all necessary parts for easy installation.
Q: Will this steering kit fit my 110CC engine?
A: Yes! This steering kit was designed specifically for 110CC engines as well as many types of ATV Go Kart Buggy Quad DIYs so it should fit perfectly with no issues.
Q: How durable is this product?
A: The sturdy design of this product ensures that it can withstand even the most rugged driving conditions so it should last you many years before any maintenance or replacements are needed!
Additional Product Information
Togarhow 270mm Steering Wheel Assembly with Tie Rod Rack Adjustable Shaft and Front Wheel Hubs with Steering Knuckle Kit Full Steel Off-Road Gear Rack Fit for 110cc 125cc Go Kart Bike(10.6)
Are you looking for the perfect steering wheel assembly to add to your ATV, go kart, or other ride? Look no further than the Togarhow 270mm Steering Wheel Assembly! This full steel off-road gear rack fits 110cc and 125cc go karts and comes with a steering wheel, left & right steering knuckle, tie rod, adjustable shaft and front wheel hubs.
Why We Like This
It’s made of metal material with PU foam around the outside for a comfortable grip.
The distance between hub mounting holes is approximately 77mm (3.03 inches).
The steering wheel itself is 10.6 inches in diameter and has a 16mm center hole and 7mm mounting holes.
It’s a classic and universal steering wheel for ATVs and go karts.
High quality construction that fits many types of ATVs and go karts.
Common Questions & Answers
Q: What sizes are the different parts of this assembly?
A: The steering wheel has a diameter of 270mm (10.6″), center hole of 16mm (0.6″) and mounting holes of 7mm (0.2″). The distance between hub mounting holes is approximately 77mm (3.03 inches).
Q: What type of vehicles can this be used on?
A: This full steel off-road gear rack fits 110cc and 125cc go karts as well as ATVs or other rides you may have.
Q: Does this include all necessary parts for installation?
A: Yes! This assembly includes 1 steering wheel, 1 left & right steering knuckle, 1 tie rod, 1 rack, 1 adjustable shaft and 2 front wheel hubs so you can get everything installed quickly and easily!
Additional Product Information
munirater 300mm Steering Wheel Steel Kit 320mm Gear Rack Pinion Adjustable Shaft Set Replacement for 110CC Go Kart
Are you looking for a replacement part for your ATV, Go Kart, Buggy or Quad? Look no further than the Munirater 300mm Steering Wheel Steel Kit 320mm Gear Rack Pinion Adjustable Shaft Set. This is a great replacement part that is easy to install and can help improve the performance of your vehicle. The steering wheel is made from high quality metal with hard plastic around the outside, making it durable and sturdy. The kit includes a tie rod, steering rack and adjustable shaft everything you need to make sure your vehicle runs smoothly and safely.
Why We Like This
Made of premium metal material with hard black plastic around the outside, smooth, anti – rust, durable and sturdy.
The diameter for the steering wheel is 11.8 / 300mm with mounting holes centre to centre distance at 1.42 / 36mm.
Includes tie rod, steering rack and adjustable shaft making it easy to install on your vehicle.
Replacement for many types of ATV Go Kart Buggy Quad great for upgrading or replacing old parts.
End to end length range after the tie rod connected with the steering rack is from 33 – 35 / 840mm – 890mm., giving you more flexibility when installing it on your vehicle.
Common Questions & Answers
Q: What type of vehicles will this work with?
A: This kit will work with many types of ATV, Go Kart, Buggy or Quad vehicles. It is great for upgrading or replacing old parts as well as new installs.
Q: What are dimensions of this product?
A: The diameter for the steering wheel is 11.8 / 300mm and mounting holes centre to centre distance at 1.42 / 36mm., while end to end length range after the tie rod connected with the steering rack is from 33 – 35 / 840mm – 890mm., giving you more flexibility when installing it on your vehicle..
Q: Is this product durable?
A: Yes! The Munirater 300mm Steering Wheel Steel Kit 320mm Gear Rack Pinion Adjustable Shaft Set is made from high quality metal material with hard plastic around the outside which makes it durable and sturdy enough to last you through many drives!
Additional Product Information
| Length | 17.1259842345 |
| Width | 12.204724397 |
labwork 300mm Steering Wheel Steel Kit 320mm Gear Rack Pinion Adjustable Shaft Set Replacement for 110cc Go Kart
Are you looking for a replacement steering wheel for your 110cc Go Kart? Look no further because the labwork 300mm Steering Wheel Steel Kit 320mm Gear Rack Pinion Adjustable Shaft Set is exactly what you need! This high-quality steering wheel comes with an adjustable shaft set, making it a great choice for any type of ATV Go Kart Buggy Quad. The diameter of the steering wheel is 11.8 inches, and the mounting holes are center to center at 1.42 inches. The end-to-end length range after connecting the tie rod with the steering rack is from 33 to 35 inches.
Why We Like This
The steel material provides strength and durability
The adjustable shaft allows you to customize your setup
It’s compatible with several types of ATV Go Kart Buggy Quad
The dimensions make it perfect for 110cc Go Kart
Affordable price tag
Common Questions & Answers
Q: What is the diameter of this steering wheel?
A: The diameter for the steering wheel is 11.8 / 300mm
Q: How long is the adjustable shaft?
A: The end to end length range after connecting the tie rod with the steering rack is from 33-35 / 840mm-890mm.
Q: Is this product compatible with other vehicles?
A: Yes, it’s compatible with several types of ATV Go Kart Buggy Quad.
Additional Product Information
Benefits of go kart rack and pinion steering kit
1. Improved Control: The rack and pinion steering kit provides improved control, allowing for more precise steering. This allows for better maneuverability, especially in tight spaces such as karting tracks.
2. Lightweight Design: The rack and pinion steering kit is lightweight, making it ideal for karts that need to be light to perform well on the track. This also helps to reduce wear and tear on the motors, resulting in a longer life for your kart.
3. Easy Installation: The rack and pinion steering kit is easy to install and requires minimal time or effort to set up correctly. It also requires fewer parts than other types of steering systems, making it a cost-effective solution.
4. Durable: The rack and pinion steering kit is designed to last, with its sturdy construction ensuring that it can withstand the rigors of racing conditions without breaking down or malfunctioning over time.
Buying Guide for go kart rack and pinion steering kit
What is a Go Kart Rack and Pinion Steering Kit?
A go kart rack and pinion steering kit is a type of steering system used in go karts that allows for the easy maneuvering of the vehicle. It consists of a rack, which is an angled metal bar, coupled with a pinion gear. The pinion is attached to the steering wheel and when it turns, it causes the rack to move left or right, thus allowing for steering control.
Types of Go Kart Rack and Pinion Steering Kits
There are two main types of go kart rack and pinion steering kits available on the market. The first type is a complete kit that includes all the necessary components such as the rack, pinion gear, tie rods, and knuckles. The second type is a basic kit that only includes the rack and pinion gear.
Compatibility
When purchasing a go kart rack and pinion steering kit, it is important to make sure that it is compatible with your particular go kart model. Many manufacturers offer kits specifically designed for certain models so be sure to check if your model is compatible with the kit you are looking at before making a purchase.
Price
Go kart rack and pinion steering kits can range in price from relatively inexpensive to quite expensive depending on their quality and features. Generally speaking, basic kits will be cheaper than complete kits as they only include essential components while complete kits will include more components such as tie rods or knuckles, which can increase its cost significantly.
Installation
Installing a go kart rack and pinion steering kit can be done by anyone who has some mechanical knowledge or experience working on vehicles. If you are not comfortable doing this yourself, its best to take your kart to an experienced mechanic who can install it safely.
The Go Kart Rack and Pinion Steering Kit is a great way to upgrade the steering on your go kart. It is easy to install and provides a much more precise steering system than traditional steering systems. With this kit, you can get the most out of your go kart, whether you are an experienced racer or just out for some fun. The kit also comes with all of the necessary components and instructions, making it an easy and affordable way to improve your go kart.
