Why Dinosaur Water Heater Circuit Board Is Necessary?
Dinosaur water heater circuit board is used to prevent the formation of mineral deposits on the heating element of your water heater. This will prolong the life of your water heater and keep it running efficiently.
Comparison Table for Dinosaur Water Heater Circuit Board
Dinosaur Water Heater Circuit Board Guidance
Dinosaur Electronics UIB64 Ignition Board
Dinosaur Electronics UIB64 Ignitor Board is a TEI Certified ignitor board that uses 12VDC operation. It is surge and fuse protected with 3 diagnostic LEDs. The size of the board is 325″ x 425″.
Common Questions on Dinosaur Electronics UIB64 Ignition Board
• What is the model number for the Dinosaur Electronics UIB64 Ignition Board?The model number is UIB64.
• What is the purpose of the Dinosaur Electronics UIB64 Ignition Board?
The Dinosaur Electronics UIB64 Ignition Board is used to provide ignition power to a gas-fired appliance.
• How does the Dinosaur Electronics UIB64 Ignition Board work?
The Dinosaur Electronics UIB64 Ignition Board uses a piezo electric igniter to create a spark that ignites the gas in the appliance.
• What are the dimensions of the Dinosaur Electronics UIB64 Ignition Board?
The Dinosaur Electronics UIB64 Ignition Board is 2.375 inches wide by 3.875 inches long.
• What is the warranty on the Dinosaur Electronics UIB64 Ignition Board?
The Dinosaur Electronics UIB64 Ignition Board has a one-year limited warranty.
Why We Like This
• 1. Dinosaur Electronics UIB64 Ignition Board is TEI Certified.• 2. 12 VDC Operation.• 3. Fuse & Surge protected.• 4. Size: 325″ x 425″.• 5. 3 Diagnostic LEDs.
Additional Product Information
| Color | green |
| Height | 9.99 Inches |
| Length | 9.99 Inches |
Atwood 91365 Circuit Board Kit for Water Heaters – Use with Gas/Electric 12 VDC
Welcome to our blog on the Atwood 91365 Circuit Board Kit for Water Heaters. This newest model replaces the Atwood 93851 and is compatible with the following water heaters:
Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E.
This combo board controls both the LP ignition and the Electric Element. The Atwood part #93309 (edge connector pin) is not included.
Atwood provides excellent technical support in diagnosing and resolving technical problems. We hope you enjoy this product and find it helpful in keeping your water heater running smoothly.
Common Questions on Atwood 91365 Circuit Board Kit for Water Heaters – Use with Gas/Electric 12 VDC
• What type of circuit board is this?Atwood 91365 Circuit Board Kit for Water Heaters – Use with Gas/Electric 12 VDC
• How does this circuit board work?
This circuit board is used in conjunction with gas or electric water heaters. It helps to regulate and control the heater’s function.
Why We Like This
• 1. The Atwood 91365 Circuit Board Kit is the newest model and replaces the Atwood 93851.• 2. The kit is compatible with water heaters models GCH6A 10E, GC6AA 10E, GC10A 4E, GCH10A 4E, and GCH10A 4E.• 3. The combo board controls both the LP ignition and the Electric Element.• 4. Atwood provides prompt support in diagnosing and resolving technical problems.• 5. The kit includes a one year warranty.
Additional Product Information
| Color | black |
| Height | 4 Inches |
| Length | 6 Inches |
| Weight | 0.5 Pounds |
RV Water Heater Circuit Board Replacement 91367 | Water Heater Replacement Parts and Optional Adapter (Circuit Board Only)
The RV water heater circuit board replacement 91367 is a replacement circuit board for your RV water heater. It is compatible with the following models: G6A-6E, G6A-7E, G6A-8E, GH6-6E, GH6-7E, GH6-8E, G10-1E, GH10-1E, G10-2E G10-3E, G6A-2E, GH6-3E, GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E. The dimensions of the board are 4 1/4” x 2 5/8” x 1”. It is a 12V DC board with an optional adapter.
Common Questions on RV Water Heater Circuit Board Replacement 91367 | Water Heater Replacement Parts and Optional Adapter (Circuit Board Only)
• How do I replace the circuit board on my RV water heater?First, you will need to purchase a replacement circuit board and an optional adapter. Next, remove the old circuit board from the water heater. To do this, disconnect the wires from the old board and then remove the two screws that hold it in place. Finally, install the new board in the same manner.
• What do I do if my RV water heater does not have a circuit board?
You will need to purchase a replacement water heater.
• What is the warranty on a new RV water heater?
Most water heaters come with a one-year warranty.
Why We Like This
• RV water heater circuit board replacement• Compatible with G6A 6E, G6A 7E, G6A 8E, GH6 6E, GH6 7E, GH6 8E, G10 1E, GH10 1E, G10 2E G10 3E, G6A 2E, GH6 3E, GCH6 4E, GCH6 6E, GCH6 7E, GC6A 7E models• Dimensions: 4 1/4” x 2 5/8” x 1”• 12V DC• Optional Adapter
Dinosaur Electronics (UIB S) Small Universal Ignitor Board
A Dinosaur Electronics (UIB S) Small Universal Ignitor Board is a top quality product that is known for its durability and performance. This product has a dual sense feature that allows it to work through a high voltage connector and an edge connector simultaneously. In addition, it has an external sense connector that allows it to be used with an external sense wire. Additionally, the board has a diagnostic-aid LED that is green to show power to the board and red to indicate power to the gas valve. Finally, the board has a voltage regulator that cleans up the 12 Volt supply power.
Common Questions on Dinosaur Electronics (UIB S) Small Universal Ignitor Board
• What is the Dinosaur Electronics (UIB S) Small Universal Ignitor Board?The Dinosaur Electronics (UIB S) Small Universal Ignitor Board is a components that helps to create a spark in order to light the grill or stove.
• How does the Dinosaur Electronics (UIB S) Small Universal Ignitor Board work?
The Dinosaur Electronics (UIB S) Small Universal Ignitor Board helps to create a spark in order to light the grill or stove by using a small amount of electricity.
• What are the benefits of using the Dinosaur Electronics (UIB S) Small Universal Ignitor Board?
The Dinosaur Electronics (UIB S) Small Universal Ignitor Board is a benefits of using the product because it is easy to use and it is also easy to find at stores.
• How do you use the Dinosaur Electronics (UIB S) Small Universal Ignitor Board?
You use the Dinosaur Electronics (UIB S) Small Universal Ignitor Board by first adding the required amount of electricity, then connecting it to the grill or stove. Afterward, you will need to create a spark in order to light the stove.
Why We Like This
• 1) The dual sense feature allows the ignitor board to work through both the high voltage connector and edge connector simultaneously.• 2) The external sense feature allows for a connector to be placed on the board for an external sense wire.• 3) The diagnostic aid LED is green to show power to the board and red to indicate power to the gas valve.• 4) The voltage regulator cleans up the 12 Volt supply power.• 5) The size of the board is 325 x 425 inches.
Additional Product Information
| Height | 2 Inches |
| Length | 6.7 Inches |
| Weight | 0.46 Pounds |
Atwood 31501 Circuit Board
The Atwood 31501 Circuit Board is responsible for all the functions necessary to turn the furnace on and keep it running. The Board is powered with 12V DC and sends signals to open the gas valve and emit a high output voltage that creates an ignition spark to light the burner.
The Atwood 31501 Circuit Board is compatible with Atwood Hydro Flame Furnaces: 7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111, DFMD25111, DFMD30111, DFMD35111 DFSD12111, DFSD16111 and DFSD20111.
If your control board uses the older edge connection, then the Dometic 35325
Common Questions on Atwood 31501 Circuit Board
• What is the function of the Atwood 31501 Circuit Board?The Atwood 31501 Circuit Board is responsible for managing and regulating the electrical current in the RV. It also has a number of safety features to protect the RV from electrical hazards.
Why We Like This
• The ignition control board performs all the functions necessary to turn the furnace on and keep it running.• Powered with 12V DC, the board sends signals to open the gas valve and emits a high output voltage that creates an ignition spark to light the burner.• The board is compatible with a variety of Atwood Hydro Flame furnaces.• If your control board uses the older edge connection, then the Dometic 35325 adapter will be required for installation.• This is a genuine Atwood replacement part.
Additional Product Information
| Height | 2.4 Inches |
| Length | 6.8 Inches |
| Weight | 0.4 Pounds |
Benefits of Dinosaur Water Heater Circuit Board
A Dinosaur water heater circuit board provides many benefits for your home. It is a great way to heat your water and it is also very energy efficient. There are many different types of these units on the market, so you can choose the one that best suits your needs.
Buying Guide for Dinosaur Water Heater Circuit Board
If your home has a dinosaur water heater, chances are the circuit board is going bad. This guide will help you replace the circuit board on your own.
First, turn off the power to the water heater at the breaker box. Next, remove the access panel to get to the circuit board. You’ll need a screwdriver for this.
Once the access panel is off, locate the old circuit board and disconnect it from all of the wires. Then, remove any screws holding it in place.
Now it’s time to install the new circuit board. Start by connecting all of the wires to their proper terminals, then screwing it into place. Lastly, put back on the access panel and turn on power at the breaker box.
Frequently Asked Question
How does the dinosaur water heater circuit board work?
The dinosaur water heater circuit board is a computerized control board that regulates the heating element in the water heater. The circuit board controls the amount of power that is sent to the heating element, based on the water temperature. When the water temperature drops, the circuit board sends more power to the heating element to bring the water back up to the desired temperature.
How can I troubleshoot problems with the dinosaur water heater circuit board?
If the circuit board is not working properly, the first thing to check is the fuse. If the fuse is blown, replace it with a new one. If the fuse is not blown, check the power supply to the circuit board. If the power supply is not working, the circuit board will need to be replaced.
What are some common problems with the dinosaur water heater circuit board?
There are a few common problems with the dinosaur water heater circuit board. The most common problem is that the board can short circuit, which can cause a fire. Another common problem is that the board can overheat, which can cause the water heater to malfunction.
How can I prevent problems with the dinosaur water heater circuit board?
If you have a problem with the dinosaur water heater circuit board, you can prevent it by: -Replacing the circuit board -Checking the wiring -Making sure the circuit board is properly mounted -Checking for loose connections -Making sure the power supply is working properly
What should I do if I have a problem with the dinosaur water heater circuit board?
If you have a problem with the dinosaur water heater circuit board, you should contact the manufacturer.
Conclusion
Thanks for your time. I hope I was able to show you how the dinosaur water heater circuit board can save you money and provide hot water on demand. The tankless design means that there is no standby heat loss, and the unit can be mounted indoors or outdoors.
TheIdaho808@gmail.
