The dinosaur circuit board is an upgrade that is available for both electric and gas water heaters. It replaces the existing control board with a new one that is specifically designed for extended use. The benefits of this upgrade include increased efficiency, longer lifespan, and improved safety.
Why Dinosaur Circuit Board For Atwood Water Heater Is Necessary?
Dinosaur circuit boards are used in water heaters to regulate the flow of electricity. They help to prevent fires by controlling the amount of current that flows through the appliance.
Comparison Table for Dinosaur Circuit Board For Atwood Water Heater
Dinosaur Circuit Board For Atwood Water Heater Guidance
Dinosaur Electronics UIB64 Ignition Board
The Dinosaur Electronics UIB64 Ignition Board is a high-quality ignitor board that is certified by the Telecommunications Equipment Industries Association (TEI). It is designed to operate on 12 VDC and is fuse and surge protected. The board is also equipped with three diagnostic LEDs that allow the user to troubleshoot any issues that may arise.
Common Questions on Dinosaur Electronics UIB64 Ignition Board
• What is the UIB64 Ignition Board?The UIB64 Ignition Board is an ignition control module that is used in vehicles with electronic ignition systems. It is designed to improve the ignition performance of the engine and help to reduce emissions.
• How does the UIB64 Ignition Board work?
The UIB64 Ignition Board controls the timing and duration of the spark at the spark plugs. It also provides a higher voltage to the spark plugs, which helps to improve the ignition performance of the engine.
• What are the benefits of using the UIB64 Ignition Board?
The UIB64 Ignition Board can improve the ignition performance of the engine and help to reduce emissions. It can also help to extend the life of the spark plugs and improve fuel economy.
• What are some of the features of the UIB64 Ignition Board?
Some of the features of the UIB64 Ignition Board include an adjustable dwell control, an electronic ignition output, and a built-in rev limiter.
• Where can I buy the UIB64 Ignition Board?
The UIB64 Ignition Board
Why We Like This
• 1) The Dinosaur Electronics UIB64 Ignition Board is a TEI certified product that is designed for 12 VDC operation.• 2) The board features fuse and surge protection for added safety.• 3) The board has a size of 325″ x 425″ and features three diagnostic LEDs.• 4) The board is easy to install and comes with detailed instructions.• 5) The board is backed by a one year warranty.
Additional Product Information
| Color | green |
| Height | 9.99 Inches |
| Length | 9.99 Inches |
Dinosaur Electronics (UIB S) Small Universal Ignitor Board
The Dinosaur Electronics UIB S Small Universal Ignitor Board is a reliable and easy to use ignitor board that is perfect for a wide range of applications. This ignitor board features a dual sense flame sensor that can be used with both high voltage and edge connectors, as well as an external sense connector for use with an external sense wire. This board also features a diagnostic-aid LED that is green to show power to the board and red to indicate power to the gas valve. The voltage regulator on this board cleans up the 12 volt supply power, making it safe and reliable to use. This ignitor board is also fuse and surge protected, making it a great choice for a wide range of applications.
Common Questions on Dinosaur Electronics (UIB S) Small Universal Ignitor Board
• What is the Dinosaur Electronics (UIB S) Small Universal Ignitor Board?The Dinosaur Electronics (UIB S) Small Universal Ignitor Board is a device that helps to create sparks in order to light a grill or other combustion appliance.
• How does the Dinosaur Electronics (UIB S) Small Universal Ignitor Board work?
The Dinosaur Electronics (UIB S) Small Universal Ignitor Board uses a battery to create an electrical current that flows through a wire coil. This current creates a magnetic field, which in turn creates a spark that can be used to ignite a fuel source.
• What are some of the benefits of using the Dinosaur Electronics (UIB S) Small Universal Ignitor Board?
Some of the benefits of using the Dinosaur Electronics (UIB S) Small Universal Ignitor Board include the fact that it is easy to use, it is portable, and it is easy to find replacement parts for.
• Where can I purchase the Dinosaur Electronics (UIB S) Small Universal Ignitor Board?
The Dinosaur Electronics (UIB S) Small Universal Ignitor Board is available for purchase through the Dinosaur Electronics website or through a variety of online retailers.
Q
Why We Like This
• 1. The Dinosaur Electronics (UIB S) Small Universal Ignitor Board is a great product for those who are looking for a reliable and easy to use ignitor board.• 2. The board features dual sense technology which allows for a more accurate flame detection.• 3. The board also has an external sense connector which allows for the use of an external sensor.• 4. The board is also equipped with a diagnostic aid LED which is green to show power to the board and red to indicate power to the gas valve.• 5. The board is also surge and fuse protected for added safety.
Additional Product Information
| Height | 2 Inches |
| Length | 6.7 Inches |
| Weight | 0.46 Pounds |
Atwood 91365 Circuit Board Kit for Water Heaters – Use with Gas/Electric 12 VDC
If you have an Atwood water heater, you may be in need of the Atwood 91365 Circuit Board Kit. This kit is designed to replace the Atwood 93851 and is compatible with water heaters models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E. The Atwood 91365 Circuit Board Kit is a combo board that controls both the LP ignition and the electric element.
If you need technical support, Atwood provides prompt support in diagnosing and resolving technical problems.
Common Questions on Atwood 91365 Circuit Board Kit for Water Heaters – Use with Gas/Electric 12 VDC
• What is the model number for the Atwood 91365 Circuit Board Kit for Water Heaters?The model number for the Atwood 91365 Circuit Board Kit for Water Heaters is 91365.
• What is the part number for the Atwood 91365 Circuit Board Kit for Water Heaters?
The part number for the Atwood 91365 Circuit Board Kit for Water Heaters is 91365.
• What is the price of the Atwood 91365 Circuit Board Kit for Water Heaters?
The price of the Atwood 91365 Circuit Board Kit for Water Heaters is $79.99.
• What is the warranty period for the Atwood 91365 Circuit Board Kit for Water Heaters?
The warranty period for the Atwood 91365 Circuit Board Kit for Water Heaters is 1 year from the date of purchase.
• How many volts does the Atwood 91365 Circuit Board Kit for Water Heaters use?
The Atwood 91365 Circuit Board Kit for Water Heaters uses 12 volts.
Why We Like This
• The Atwood 91365 Circuit Board Kit for Water Heaters is the newest model and is a replacement for the Atwood 93851.• The Atwood 91365 Circuit Board Kit for Water Heaters is compatible with water heaters models GCH6A 10E, GC6AA 10E, GC10A 4E, GCH10A 4E, GCH10A 4E.• The Atwood 91365 Circuit Board Kit for Water Heaters is a combo board that controls both the LP ignition and the Electric Element.• The Atwood 91365 Circuit Board Kit for Water Heaters does not include the Atwood part #93309 (edge pin connector).• Atwood provides prompt support in diagnosing and resolving technical problems.
Additional Product Information
| Color | black |
| Height | 4 Inches |
| Length | 6 Inches |
| Weight | 0.5 Pounds |
Atwood 31501 Circuit Board
The Atwood 31501 Circuit Board is the brains behind your Atwood Hydro Flame Furnace. This powerful little 12V DC board sends signals to open the gas valve and ignite the burner, providing a continuous flow of warmth to keep you comfortable all winter long. Compatible with a wide range of Atwood furnaces, the 31501 is a must-have for any RV owner looking to stay warm on those cold winter nights.
Common Questions on Atwood 31501 Circuit Board
• What are the three main components of the Atwood 31501 Circuit Board?The three main components of the Atwood 31501 Circuit Board are the microprocessor, the read-only memory, and the random access memory.
• What is the function of the microprocessor on the Atwood 31501 Circuit Board?
The microprocessor on the Atwood 31501 Circuit Board controls the overall operation of the circuit board. It reads and executes instructions stored in the read-only memory and the random access memory.
• What is the function of the read-only memory on the Atwood 31501 Circuit Board?
The read-only memory on the Atwood 31501 Circuit Board stores the instructions that the microprocessor reads and executes. These instructions cannot be changed by the user.
• What is the function of the random access memory on the Atwood 31501 Circuit Board?
The random access memory on the Atwood 31501 Circuit Board stores data and instructions that can be accessed randomly by the microprocessor. This memory can be changed by the user.
Why We Like This
• 1. The Atwood 31501 Circuit Board is a replacement for the Atwood Hydro Flame Furnaces.• 2. The Atwood 31501 Circuit Board is also compatible with the Dometic 35325 adapter.• 3. The Atwood 31501 Circuit Board is powered with 12V DC.• 4. The Atwood 31501 Circuit Board sends signals to open the gas valve.• 5. The Atwood 31501 Circuit Board emits a high output voltage that creates an ignition spark to light the burner.
Additional Product Information
| Height | 2.4 Inches |
| Length | 6.8 Inches |
| Weight | 0.4 Pounds |
Fenwal Atwood 31501
If you have an Atwood furnace in your RV, then you know that you need a Fenwal 31501 ignition board to get it up and running. This ORIGINAL OEM part is essential for Atwood hydroflame furnaces that specify Atwood P/N 31501 or 33488. Make sure your Atwood furnace is running smoothly by replacing your old ignition board with this new one. This board works with the following Atwood furnace models: 7912-II, 7900-II 16 & 20, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D,85-IV 16, 85-IV 20, 85-IV 25, 85-IV 31, 85-IV 35, 85-III 16-20, 85-III 25, 85-III 31-35, 85-II 25, 85-II 31-35, 85-I 16-20, 85-I 25, 85-I 31-35, 89-I DC, 89-II DC, 89-III DC. Fit type: Universal. Order your Fenwal 31501 ignition board today and keep your Atwood furnace running like new.
Common Questions on Fenwal Atwood 31501
• Where can I find the installation manual for the Fenwal Atwood 31501?The installation manual can be found on the Fenwal website.
• What are the dimensions of the Fenwal Atwood 31501?
The Fenwal Atwood 31501 is 19.25″H x 15.875″W x 3.625″D.
• How much does the Fenwal Atwood 31501 weigh?
The Fenwal Atwood 31501 weighs 8 lbs.
• What is the BTU rating of the Fenwal Atwood 31501?
The Fenwal Atwood 31501 has a BTU rating of 30,000.
• What is the warranty on the Fenwal Atwood 31501?
The Fenwal Atwood 31501 has a one year limited warranty.
Why We Like This
• Fenwal ORIGINAL OEM• 12VDC RV Gas Ignition Fan Control Pin Connect Board and EC Adapter• USE only in AtwoodHydroflame Rv Furnace that Specify Atwood P/N 31501 or 33488• Atwood furnace models supported• Works with Model #s: 7912 II, 7900 II 16 & 20, 8012 II, FA 79D, HF 80D, DC82 25 32, DC82 35 41, FA 76D, FA 78 25 32, FA 72D,85 IV 16, 85 IV 20, 85 IV 25, 85 IV 31, 85 IV 35, 85 III 16 20, 85 III 25, 85 III 31 35, 85 II 25, 85 II 31 35, 85 I 16 20, 85 I 25, 85 I 31 35, 89 I DC, 89 II DC, 89 III DC• Universal Fit
Additional Product Information
| Height | 1.5 Inches |
| Length | 4.25 Inches |
| Weight | 0.375 Pounds |
Benefits of Dinosaur Circuit Board For Atwood Water Heater
If your Atwood water heater is more than 5 years old, it may be time for an upgrade. The new Dinosaur circuit board for Atwood water heaters offers many benefits over the older style boards. Here are just a few of the benefits you’ll enjoy:
1. More Reliable Operation – The Dinosaur circuit board is designed to be much more reliable than the older style boards. It includes features such as self-diagnostics and fail-safe operation that help to ensure your water heater will always operate when you need it.
2. Lower Operating Costs – Thanks to its improved efficiency, the Dinosaur circuit board can help lower your monthly operating costs by as much as 20%.
3. Easy Installation – The circuit board comes with easy-to follow instructions and all of the necessary hardware for a quick and easy installation process that anyone can do themselves in just minutes (no electrician required).
Buying Guide for Dinosaur Circuit Board For Atwood Water Heater
When shopping for a new circuit board for your Atwood water heater, there are a few things to keep in mind. First, you’ll need to know the model number of your heater in order to purchase the correct board. Second, you should make sure that the board you’re considering is compatible with your Atwood water heater model. Third, you’ll want to read online reviews of the board before making your purchase to ensure that it’s a high-quality product. Finally, be sure to factor in the cost of shipping and handling when deciding which board to buy.
Frequently Asked Question
What is the problem?
There is no problem.
What are the symptoms?
There are a variety of symptoms that can be associated with a mental health disorder. These can include changes in mood, changes in behavior, changes in thinking, and changes in physical health.
What is the model number of the Atwood water heater?
The model number of the Atwood water heater is 6 gallon.
What is the serial number of the Atwood water heater?
The Atwood water heater does not have a serial number.
What is the date of manufacture of the Atwood water heater?
The date of manufacture of the Atwood water heater can be found on the rating plate located on the front of the unit. The rating plate will have a serial number and a date code. The date code is typically a letter followed by two numbers. The first number is the year and the second number is the week.
Conclusion
Thank you for your time, and we hope you will consider our new dinosaur circuit board for your Atwood water heater! This amazing product will help improve the efficiency of your heater while also providing a fun and unique look to your home.
