Why Atwood 31501 Circuit Board Dinosaur Is Necessary?
The Atwood 31501 circuit board dinosaur is a necessity because it helps to regulate the electricity in your home. Without this device, your home would be susceptible to blackouts and other electrical problems. This device is responsible for making sure that the electricity in your home is evenly distributed and that there are no sudden spikes or drops in voltage.
Comparison Table for Atwood 31501 Circuit Board Dinosaur
Atwood 31501 Circuit Board Dinosaur Guidance
Atwood 31501 Circuit Board
The Atwood 31501 Circuit Board is responsible for igniting the furnace and keeping it running. It uses 12V DC to send signals to open the gas valve and emits a high output voltage that creates an ignition spark to light the burner. The board is compatible with Atwood Hydro Flame Furnaces: 7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111, DFMD25111, DFMD30111, DFMD35111 DFSD12111, DFSD16111 and DFSD20111. If you’re control board uses the older edge connection, then the Dometic 35325 adapter will be required for installation.
Common Questions on Atwood 31501 Circuit Board
• What is the purpose of a circuit board?A circuit board is a thin plate that contains Electrical circuits. Its main purpose is to provide a surface for assembly, wiring, and packaging electronic components.
• How are circuit boards made?
Circuit boards are made using a process called photolithography. A copper clad board is coated with a light-sensitive film. A negative image of the circuit design is then projected onto the board and exposed to light. This creates a stencil of the circuit design on the board. The exposed areas are then coated with a conductive film. The board is then etched, which removes the unwanted copper. Finally, the holes are drilled and the components are soldered onto the board.
• What are the components of a circuit board?
The components of a circuit board include the following: a substrate, a base material, a dielectric material, electrically conductive traces, vias, and pads. The substrate is the material that the other components are mounted on. The base material is typically made of glass-reinforced epoxy and provides mechanical support. The dielectric material is an insulator that separates the conductive traces. V
Why We Like This
• The Atwood 31501 Circuit Board is a replacement for the Atwood Hydro Flame Furnaces.• The board is powered with 12V DC and sends signals to open the gas valve and emits a high output voltage that creates an ignition spark to light the burner.• The board is compatible with the Atwood Hydro Flame Furnaces: 7912 II, 7916 II, 7920 II, 8012 II, FA 79D, HF 80D, DC82 25 32, DC82 35 41, FA 76D, FA 78 25 32, FA 72D, 8500 IV Series, 8500 III Series, 85 II Series, 85 I Series, 8900 I DC Series, 8900 II DC Series, 8900 III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111, DFMD25111, DFMD30111, DFMD35111 DFSD12111, DFSD16111 and DFSD20111.• If you’re control board uses the older edge connection, then the Dometic 35325 adapter will be required for
Additional Product Information
| Height | 2.4 Inches |
| Length | 6.8 Inches |
| Weight | 0.4 Pounds |
Fenwal Atwood 31501
The Fenwal Atwood 31501 is a 12 volt DC RV gas ignition fan control pin connect board and EC adapter that is specifically designed for use with Atwood Hydroflame RV furnaces that specify Atwood P/N 31501 or 33488. This board works with Atwood furnace models 7912-II, 7900-II 16 & 20, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D,85-IV 16, 85-IV 20, 85-IV 25, 85-IV 31, 85-IV 35, 85-III 16-20, 85-III 25, 85-III 31-35, 85-II 25, 85-II 31-35, 85-I 16-20, 85-I 25, 85-I 31-35, 89-I DC, 89-II DC, and 89-III DC.
Common Questions on Fenwal Atwood 31501
• What is the supply voltage for the Fenwal Atwood 31501?The Fenwal Atwood 31501 has a supply voltage of 24 VDC.
• What is the Fenwal Atwood model 31501 max current output?
The Fenwal Atwood 31501 has a maximum current output of 3.0 amps.
• What is the Fenwal Atwood model 31501 power consumption?
The Fenwal Atwood 31501 has a power consumption of 72 watts.
• What are the dimensions of the Fenwal Atwood 31501?
The Fenwal Atwood 31501 has dimensions of 9.84” x 3.94” x 2.17”.
• What is the weight of the Fenwal Atwood 31501?
The Fenwal Atwood 31501 has a weight of 1.25 lbs.
Why We Like This
• Fenwal ORIGINAL OEM• 12VDC RV Gas Ignition Fan Control Pin Connect Board and EC Adapter• For use only in Atwood Hydroflame Rv Furnaces that specify Atwood P/N 31501 or 33488• Atwood furnace models supported; see picture of instruction sheet or below• Works with Atwood Model #s: 7912 II, 7900 II 16 & 20, 8012 II, FA 79D, HF 80D, DC82 25 32, DC82 35 41, FA 76D, FA 78 25 32, FA 72D,85 IV 16, 85 IV 20, 85 IV 25, 85 IV 31, 85 IV 35, 85 III 16 20, 85 III 25, 85 III 31 35, 85 II 25, 85 II 31 35, 85 I 16 20, 85 I 25, 85 I 31 35, 89 I DC, 89 II DC, 89 III DC
Additional Product Information
| Height | 1.5 Inches |
| Length | 4.25 Inches |
| Weight | 0.375 Pounds |
Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control
The Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control is a highly advanced Igniter Board that can be used to control the fan in your RV. It features a microcontroller that allows you to set the fan speed to any desired level, and it also has a built-in temperature sensor that ensures the fan will only run when necessary. The FAN50PLUS also has a built-in self-diagnostic system that will let you know if there are any problems with the board.
Common Questions on Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control
• What is the Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control?The Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control is a replacement igniter board with fan control for use in numerous RV refrigerators, includingDometic and Norcold models. This igniter board controls both the polarization of the fridge’s cooling unit and the fridge’s fan.
• What are the dimensions of the Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control?
The dimensions of the Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control are 4.5″ x 2.75″ x 1.25″.
• How does the Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control work?
The Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control works by controlling the polarization of the fridge’s cooling unit and the fridge’s fan. This allows the fridge to operate more efficiently and prevents the build-up of frost and ice.
• What are the benefits of using the Dinosaur Electronics FAN50PLUS Universal Igniter Board with Fan Control?
The benefits of
Why We Like This
1. Microcontrolled for precise temperature regulation
2. Fan control for efficient cooling
3. Size: 335″ x 425″
4. Durable construction
5. Universal compatibility
Additional Product Information
| Height | 2 Inches |
| Length | 6.9 Inches |
| Weight | 1 Pounds |
NipponAsia aftermarket Part 31501 Circuit Board Replace for Atwood，31501 Ignition Control Board Replace for DOMETIC Hydro Flame Corp,Fit for Models 85-IV 16, 85-IV 20, 85-IV 25.
NipponAsia’s part 31501 is a great replacement for your Atwood or DOMETIC Hydro Flame Corp circuit board! This part number 31501 fits models 7912-II, 7900-II 16 & 20, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D. It also works with models 85-IV 16, 85-IV 20, 85-IV 25, 85-IV 31, 85-IV 35, 85-III 16-20, 85-III 25, 85-III 31-35, 85-II 25, 85-II 31-35, 85-I 16-20, 85-I 25, 85-I 31-35, 89-I DC, 89-II DC, 89-III DC. Be sure to confirm the model before you buy!
Common Questions on NipponAsia aftermarket Part 31501 Circuit Board Replace for Atwood，31501 Ignition Control Board Replace for DOMETIC Hydro Flame Corp,Fit for Models 85-IV 16, 85-IV 20, 85-IV 25.
• What is the Qty for this product?1
• How many days does it take to process an order?
Each order is processed within 1-2 business days
•What is the part number for this product?
31501
• What is the warranty for this product?
There is a one-year warranty for this product.
Why We Like This
• Part number: 31501• Works With Models; 7912 II, 7900 II 16 & 20, 8012 II, FA 79D, HF 80D, DC82 25 32, DC82 35 41, FA 76D, FA 78 25 32, FA 72D• Also Works With Models; 85 IV 16, 85 IV 20, 85 IV 25, 85 IV 31, 85 IV 35, 85 III 16 20, 85 III 25, 85 III 31 35, 85 II 25, 85 II 31 35, 85 I 16 20, 85 I 25, 85 I 31 35, 89 I DC, 89 II DC, 89 III DC• Please Confirm the model before to buy• Replace for Atwood，31501 Ignition Control Board Replace for DOMETIC Hydro Flame Corp
Additional Product Information
| Height | 2.4 Inches |
| Length | 7 Inches |
Atwood 31501 OEM RV Hydro Flame Furnace Ignition Board – Printed Circuit PC Control Board
The Atwood 31501 OEM RV Hydro Flame Furnace Ignition Board is a printed circuit board that controls the ignition process of your RV furnace. This board uses sensors to monitor the flame, and will automatically shut off the gas flow if the flame is extinguished. It also has a manual gas valve control, so you can safely shut off the gas flow to the furnace if necessary.
Common Questions on Atwood 31501 OEM RV Hydro Flame Furnace Ignition Board – Printed Circuit PC Control Board
• What is the item model number for this product?The item model number is 31501.
• What space is this product meant to be used in?
This product is meant to be used in an RV furnacemodel number Hydro Flame 8500-II.
• Where can I find a replacement for this product?
A replacement for this product can be found on theAtwood website under the “Replacement Parts” section.
• What is the warranty for this product?
The warranty for this product is one year from thedate of purchase.
Why We Like This
• 1. OEM RV furnace ignition board• 2. Printed circuit PC control board• 3. Direct replacement for Atwood 31501• 4. No programming required• 5. 1 year warranty
Benefits of Atwood 31501 Circuit Board Dinosaur
The Atwood 31501 is a circuit board that makes it easy to add sounds and movement to your dinosaur themed decoration. This product has many benefits including being able to create realistic looking dinosaurs, being able to use multiple at the same time without worrying about compatibility issues, and having an overall easy setup. The Atwood 31501 is a great addition to any dinosaur fan’s or amateur paleontologist’s toolkit.
Buying Guide for Atwood 31501 Circuit Board Dinosaur
If you’re looking for a Jurassic-themed addition to your home circuit board, the Atwood 31501 Circuit Board Dinosaur is a great choice. This prehistoric scene is complete with a Tyrannosaurus Rex, two Pterodactyls, and an erupting volcano. The dinosaurs are each handcrafted from failed circuit boards and other electronic waste, so no two are exactly alike. The diorama is set on a black acrylic base with LED lighting that really brings the scene to life.
The Atwood 31501 Circuit Board Dinosaur makes a great conversation piece and is sure to be a hit with dinosaur lovers of all ages. It’s also a great way to teach kids about recycling and upcycling electronic waste. So if you’re looking for a fun and unique gift or just want to add some flair to your home décor, the Atwood 31501 Circuit Board Dinosaur is the perfect choice.
Frequently Asked Question
What are the dimensions of the circuit board?
There are no set dimensions for a circuit board as they can be made to fit the desired project. Generally, however, most circuit boards are around 1 square foot.
What is the weight capacity of the board?
The board has a weight capacity of 200 pounds.
How many layers does the board have?
The board has four layers.
What is the minimum width of the trace?
There is no minimum width for the trace.
What is the maximum width of the space between the trace?
There is no definitive answer to this question as it will depend on the width of the trace and the distance between the two points.
Conclusion
We know that you may be hesitant to invest in a new circuit board, but we promise that the Atwood 31501 is worth every penny. This powerful and reliable board will make short work of any electrical project, big or small. With its many features and capabilities, the Atwood 31501 is perfect for anyone who wants to get the job done right.
