An air gap for floor drain is an important device for preventing contaminated water from entering the drinking water system. It is designed to create a break in the plumbing system that prevents backflow of wastewater and protects against contamination of potable water. This article provides an introduction to air gaps and their critical role in protecting public health and safety. By understanding the perplexity and burstiness of the concept, we can ensure that our plumbing systems are up to code and safe for use.
Why Air Gap for Floor Drain Is Necessary?
An air gap for floor drain is necessary to prevent contaminated water from the drain from back-flowing into the drinking water supply. The air gap acts as a physical barrier between the drain and the drinking water lines, preventing any wastewater from entering the drinking water line. The air gap also prevents sewer gases and other contaminants from entering the drinking water system. This is especially important in areas with a high risk of contamination, such as hospitals, food processing plants, and other places where clean water is critical.
Comperision Chart for air gap for floor drain
Universal Multi-Drain Air Gap for Condensates, Water Softeners and Water Filters with 1/2-inch and 3/4-inch PVC and Copper Pipe Adapters (AG180-002, GAP-A-DRAIN)
Dual Air Gap for Water Softener and Reverse Osmosis with 1-1/2 inch and 3/8 or 1/4-inch inlets, 1-1/2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001)
Water Softener Air Gap with 1/2-inch Barb Connector for Installation on a 1-1/2-inch Standpipe with PVC Trap Adapters (ET117-008, G-50BP, DLA-G)
Universal Dual Air Gap with Dual 3/8-inch OD Ports (AG100-002, 34800)
Universal Multi-Drain Air Gap for Condensates Water Softeners and Water Filters with 1-2-inch and 3-4-inch PVC and Copper Pipe Adapters (AG180-002, GAP-A-DRAIN)
The AG180-002 Universal Multi-Drain Air Gap is the perfect solution for anyone looking to manage condensates, water softeners and water filters. This air gap comes with pipe support adapters for 1/2-inch or 3/4-inch PVC and copper pipe connection, which makes it a breeze to install. It also has a snap-in retainer to ensure 1/2-inch pipes stay securely in place. Plus, it can be connected directly onto a 2-inch standpipe or floor drain using a stainless hook.
Why We Like This
Easy to connect: The AG180-002 comes with pipe support adapters for 1/2-inch or 3/4-inch PVC and copper pipe connection that make installation easy.
Standpipe / drain connection: It can be connected directly onto a 2-inch standpipe or floor drain using a stainless hook.
Splash protection: The funnel design and side splash guards eliminate the possibility of splashing outside the air gap.
Drainage control: To avoid excessive noise, use 22 degrees elbow inline with standpipe to avoid direct drainage into P-trap.
Universal air gap: This air gap can accommodate up to 5 different discharge pipes and handle the simultaneous flow from various sources such as water softener, RO filter, condensate, and iron filter.
Common Questions & Answers
Q: How much flow rate can this universal air gap handle?
A: This air gap is designed to safely drain up to 36 gallons per minute with an optimum recommended flow rate of 18 gallons per minute.
Q: How do I secure the pipes in place?
A: For 1/2 inch pipes, use the snap in retainer provided with the air gap. For larger pipes, use a pipe support adapter and stainless steel worm clamp. Ensure they are secured to a support structure within 12 – 24 inches from the air gap.
Q: Is there any way to prevent splashing noise?
A: Yes! To avoid splashing noise from water exiting the air gap into the drainpipe, add an elbow at least 12 inches from the air gap so that water flows on the side of the standpipe rather than directly into it.
Additional Product Information
| Height | 6.25 |
| Length | 4.75 |
| Width | 4.25 |
SLENCO LLC 0430 Floor Drain Adapter
SLENCO LLC 0430 Floor Drain Adapter is an ideal solution for air conditioners to get rid of water condensation. This adapter fits both 5/8″ and 3/4″ lines, saving you the hassle of having to figure out which one works best for your system. With this adapter, you no longer need to worry about a messy floor drain – it eliminates all the hassle.
Why We Like This
It’s designed with two different sizes so you don’t have to worry about compatibility issues.
It’s easy to install and requires minimal effort.
It comes with an affordable price tag.
It helps keep your floor dry and free from messes caused by water condensation.
It keeps your air conditioner working at optimal levels, ensuring the best performance possible.
Common Questions & Answers
Q: Is this adapter compatible with all air conditioners?
A: Yes, this adapter is designed to fit both 5/8″ and 3/4″ lines, so it should be compatible with most air conditioners on the market today.
Q: How long does installation take?
A: Installation is typically quite quick and easy – it should take less than 10 minutes in most cases.
Q: Is this a durable product?
A: Yes, this adapter is made of quality materials that are built to last, so you can count on it providing long-term use without any problems.
Additional Product Information
| Height | 1 |
| Length | 6.5 |
| Weight | 0.02 |
| Width | 3.5 |
Dual Air Gap for Water Softener and Reverse Osmosis with 1-1-2 inch and 3-8 or 1-4-inch inlets 1-1-2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001)
The Dual Air Gap for Water Softener and Reverse Osmosis with 1-1/2 inch and 3/8 or 1/4-inch inlets, 1-1/2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001) is a highly reliable tool to protect your plumbing system from backflow contamination. It features an easy connection process with a 1/2-inch OD inlet port for 1/2-inch PVC pipe connection. It also comes with a 3/8-inch inlet port for reverse osmosis systems and can be used with either plastic or metal standpipes. The AG130-001 air gap uses splash guards to prevent water splashing outside of the air gap and its body provides stops to ensure secure placement. Additionally, it is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested for your peace of mind.
Why We Like This
Easy To Connect: The Gap-Cap air gap has a 1/2-inch OD inlet port that accommodates any 1/2-inch slip joint adapters including a threaded end, barb connection, and a quick connect for PEX tubing. It also comes with a 3/8 inch inlet port that can accommodate both 3/8 inch poly tubing and 1/4 inch poly tubing with included adapter.
Standpipe Connection: The air gap can be directly inserted into the stand pipes of 1 inches and 2 inches diameter and its body provides stops to ensure secure placement. It can also be glued in place with plastic standpipes using regular PVC adhesive if needed.
Splash Protection: The AG130-001 uses splash guards to assure a completely dry operation when water softener operation occurs. Its splash shield eliminates the possibility of water splashing outside of the air gap and is designed to pass up to 7 gallons per minute.
Quiet Operation: To avoid excessive noise from splashing when water exits the air gap, it is recommended to use 22 degrees elbow inline with standpipe located at least 12 inches from the airgap outlet.
Certification: All products are UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested so you can feel confident that its safe to use.
Common Questions & Answers
Q: What type of pipe connections does this device have?
A: The Gap Cap Air Gap has a 1/2 inch OD inlet port for 1/2 inch PVC pipe connection as well as an additional 3/8 inch inlet port for RO systems which can accommodate both 3/8 inch poly tubing and 1/4 inch poly tubing with included adapter.
Q: Is it suitable for metal or plastic standpipes?
A: Yes, it can be used with either metal or plastic standpipes but if needed it can also be glued into place using regular PVC adhesive if needed when using plastic standpipes..
Q: Does this product have any certifications? A: Yes, this product is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested so you know that its safe to use.
Additional Product Information
| Height | 2.25 |
| Length | 4.25 |
| Width | 2.25 |
Water Softener Air Gap with 1-2-inch Barb Connector for Installation on a 1-1-2-inch Standpipe with PVC Trap Adapters (ET117-008 G-50BP, DLA-G)
The ET117-008 Water Softener Air Gap with 1/2-inch Barb Connector for Installation on a 1-1/2-inch Standpipe with PVC Trap Adapters is the perfect solution for connecting discharge water tubing from a water softener to a drain line. With its simple installation and secure connections, it is a great addition to any home. Additionally, it is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code), and NSF (National Sanitation Foundation) tested, so you can be sure that it is safe to use.
Why We Like This
Simple Installation: The ET117-008 is designed for connecting discharge water tubing from a water softener to a drain line. Its 1/2-inch barb inlet accommodates a 1/2-inch ID poly tube, while its 1-1/2-inch OD outlet connects to a 1-1/2-inch standpipe drain. Included PVC adapters provide for a secure connection to the standpipe. A black vinyl end cap (P/N ET170-018) is offered as an optional accessory for the ET117-008. The ET117-008 can be pressure fit or glued to a plastic standpipe.
Standpipe Connection: The ET117-008 has a 1-1/2 inch OD outlet that connects to a 1-1/2 inch standpipe. The air gap can adapt to different pipe materials and sizes with the use of additional adapters or couplers. The air gaps flow capacity is 15 gallons per minute.
Dry Operation: The ET117-008 is designed with a splash guard to assure completely dry operation.
Certification: The ET117-008 is legal to install in any state as it has been UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code), and NSF (National Sanitation Foundation) tested for every manufactured lot in order for users to be assured of consistent performance and safety when using this product.
Versatility: This product can be used with different pipe materials and sizes due its adaptability with additional adapters or couplers making it very versatile and easy to install even in tight spaces or areas where there may not be much room for maneuvering around pipes and connectors.
Common Questions & Answers
Q: Does this product come with any accessories?
A: Yes, this product comes with PVC adapters which provide for secure connection to the standpipe as well as an optional black vinyl end cap P/N ET170018 which can be purchased separately if desired by the user.
Q: What is the flow capacity of this air gap?
A: The flow capacity of this air gap is 15 gallons per minute.
Q: Is this product certified safe?
A: Yes, this product has been UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code), and NSF (National Sanitation Foundation) tested so you can rest assured that it meets all safety standards
Additional Product Information
Universal Dual Air Gap with Dual 3-8-inch OD Ports (AG100-002 34800)
The Universal Dual Air Gap with Dual 3/8-inch OD Ports (AG100-002, 34800) is a great solution for those looking for a reliable, easy to install, and effective air gap. This air gap has two 3/8-inch OD inlet ports that allow for direct 3/8-inch ID poly tube connection. To ensure the highest flow rate without any splashing outside of the air gap, the AG100-002 boasts a maximum flow rate of 4 gallons per minute (GPM) for each port. The air gap easily fits into 1-1/2-inch and 2-inch standpipes to provide protection against splashing, while its splash guards provide additional security. Additionally, to reduce noise levels caused by splashing into a P-trap it is recommended to use a 22 degree elbow located at least 12 inches away from the air gap.
Why We Like This
Flow Rate: The AG100-002s maximum flow rate is 4 gallons per minute (GPM) for each port without any splashing outside of the air gap.
Easy To Connect: The AG100-002 air gap has two 3/8-inch OD inlet port for direct 3/8-inch ID poly tube connection so installation is quick and easy.
Standpipe Connection: The AG100-002 easily fits into 1-1/2 inch and 2 inch standpipes providing secure placement and protection against splashing.
Splash Protection: Splash guards are an integral part of this design that eliminates the possibility of water splashing outside of the air gap.
Quiet Operation: Using a 22 degree elbow inline with standpipe located at least 12 inches away from the air gap reduces noise levels caused by splashing into a P trap.
Common Questions & Answers
Q1: What is the maximum flow rate through an air gap?
A1: The maximum flow rate through an air gap is 4 gallons per minute (GPM) for each port on the AG100-002 model.
Q2: Is this compatible with plastic or metal standpipes?
A2: Yes, it can be used with both plastic or metal standpipes and can be glued in place to plastic standpipes using regular PVC adhesive if needed.
Q3: What type of tubing should I use when connecting tubes to an AG100-002?
A3: A 3/8 inch ID poly tube should be used when connecting tubes to an AG100-002 in order to ensure optimum performance and prevent movement of tubes connected to the air gap due to pressure exerted on them.
Additional Product Information
Benefits of air gap for floor drain
1. Prevents backflow of sewer water and contaminants into the home by creating a physical barrier.
2. Prevents pressure imbalances between the plumbing system and the sewer line.
3. Reduces risk of cross-contamination from sewage systems.
4. Easy installation and maintenance with minimal disruption to the home environment.
5. Can help reduce foul odors from the drain line, keeping your home smelling fresh and clean.
6. Helps prevent costly repairs due to water damage caused by backflow or blockages in the drain line.
Buying Guide for air gap for floor drain
Types of Air Gap for Floor Drains
An air gap for a floor drain is a device that helps prevent water from backing up into a dishwasher or other connected appliance. It is also known as an air break or backflow prevention device. The air gap prevents contaminated water from flowing back into the appliance and potentially contaminating the food and drinks inside.
Air gaps come in several types, including those that are installed on the wall and those that are built into the countertop or sink. Wall-mounted air gaps are typically more affordable and easier to install than countertop models, but they can be unsightly if not properly concealed with a decorative cover plate. Countertop models, on the other hand, usually blend in more easily with their surroundings, but they can be more difficult to install.
Installation Considerations
When installing an air gap for floor drains, its important to keep in mind that it must be positioned at least 6 inches (15 cm) above any connected appliance in order to function properly. Additionally, the air gap must be installed according to local building codes and plumbing regulations. This includes ensuring that there are no obstructions preventing water from flowing out of the air gap and into the drain pipe below.
Its also important to consider how easy it will be to access the drain pipe for maintenance or cleaning purposes once the air gap has been installed. If necessary, it may be necessary to install a removable cover or access panel over the drain pipe in order to access it easily in case of a clog or other issue.
Materials
Air gaps for floor drains come in several different materials including brass, stainless steel, plastic, and rubber. Brass models tend to be more durable than plastic ones but they may require more maintenance due to oxidation over time. Stainless steel models tend to be less prone to corrosion than brass ones but they can still corrode if not properly maintained. Plastic models are generally less expensive than metal ones but they may not last as long due to wear and tear over time. Rubber models are usually less expensive than metal ones and tend to last longer since they dont corrode as easily as metal ones do.
Maintenance
In order for an air gap for floor drains to function properly, its important that it is regularly maintained and cleaned out of any debris or sediment that accumulates over time. This can help prevent clogs which could cause water backups into connected appliances or even flooding inside your home if left unchecked for too long. To clean out your air gap you should use a brush or vacuum cleaner with a hose attachment every few months depending on how much debris accumulates inside it over time
The air gap for floor drain is an effective way to protect against potential backflow of sewage and other contaminants. It creates a barrier between the sinks drainage system and the water supply, preventing any contaminated water from entering the water supply. Air gaps also help to prevent flooding and other plumbing issues by allowing waste water to be drained away from the home. Installing an air gap for floor drain is a relatively simple process that can provide peace of mind and protection for your family and property.
