Air gap floor drains are a type of plumbing fixture designed to allow water to flow away from a structure, such as a home or business. They provide an effective solution for preventing flooding and water damage by collecting and diverting runoff away from the building. This introduction will explain the benefits of air gap floor drains and why they should be considered when designing a drainage system. By providing an overview of the features, complexity and burstiness of these types of drains, readers will be able to make an informed decision on their suitability for their particular application.
Why air gap floor drain Is Necessary?
Air gap floor drains are necessary because they help prevent backflow of contaminated water into the building’s water supply. Without an air gap, the water in the drain can be siphoned back into the supply line, resulting in contaminated drinking water and potential health hazards. Air gap floor drains also prevent sewage from backing up into sinks, showers, and other areas of the building. This can help protect against costly repairs and hazardous conditions.
Comperision Chart for air gap floor drain
Universal Multi-Drain Air Gap for Condensates, Water Softeners and Water Filters with 1/2-inch and 3/4-inch PVC and Copper Pipe Adapters (AG180-002, GAP-A-DRAIN)
Plumb Pak PP855-69 Air Gap for Standpipes, Grey, FITS 1-1/2″ AND 2″ METAL OR PLASTIC STANDPIPES
Dual Air Gap for Water Softener and Reverse Osmosis with 1-1/2 inch and 3/8 or 1/4-inch inlets, 1-1/2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001)
Universal Multi-Drain Air Gap for Condensates Water Softeners and Water Filters with 1-2-inch and 3-4-inch PVC and Copper Pipe Adapters (AG180-002, GAP-A-DRAIN)
The AG180-002 Universal Multi-Drain Air Gap is the perfect solution for anyone looking to connect their water softener, water filter, or condensate system to a drain pipe. This air gap can be connected to 1/2″ and 3/4″ PVC and copper pipes, making installation easy and secure. It also comes with a snap-in retainer for 1/2″ pipes, so you won’t have to worry about them slipping out of place. Additionally, the AG180-002 can be connected directly to a 2″ standpipe or securely to a floor drain using a stainless hook – making it incredibly versatile.
Why We Like This:
Easy connection: The AG180-002 comes with pipe support adapters for 1/2″ or 3/4″ PVC and copper pipes making it easy to install.
Standpipe/drain connection: This air gap can be connected directly to a 2″ standpipe or securely to a floor drain using a stainless hook so you dont have to worry about compatibility issues.
Splash protection: The AG180-002 uses funnel design and side splash guards so theres no risk of splashing outside of the air gap.
Drainage control: If needed, the AG180-002 can be glued in place to prevent excessive noise when draining into the P-trap.
Universal air gap: The AG180-002 is designed for flow rates below 36 GPM and can accommodate up to 5 different discharge pipes simultaneously allowing you to use it with your water softener, RO filter, condensate, and iron filter.
Common Questions & Answers:
Q1: How much pressure does this air gap exert on pipes?
A1: The AG180-002 is a non-pressurized device and very little pressure is exerted on the pipes.
Q2: Is there any risk of splashing outside of the air gap?
A2: No – the funnel design along with side splash guards eliminates any possibility of water splashing outside of the air gap.
Q3: Can I glue this in place?
A3: Yes – if needed, you can glue the AG180-002 in place using regular PVC adhesive onto a plastic standpipe.
Additional Product Information
| Height | 6.25 |
| Length | 4.75 |
| Width | 4.25 |
SLENCO LLC 0430 Floor Drain Adapter
: SLENCO LLC 0430 Floor Drain Adapter
Are you tired of dealing with the mess that comes with floor drain condensation? SLENCO LLC has the perfect solution for your problem. Their 0430 Floor Drain Adapter is designed to fit 5/8″ and 3/4″ lines for air conditioners and prevents the draining of condensation onto your floors. This device is a great addition to any home or business, making sure that your floors remain dry and clean.
Why We Like This:
Fits 5/8″ and 3/4″ lines, making installation easy and efficient.
Prevents condensation from draining onto floors, eliminating mess.
Can be used for air conditioners, ensuring that your device runs efficiently.
Designed with a durable material that will stand up to wear and tear over time.
Easy to install, making it a great choice for any home or business.
Common Questions & Answers:
Q: How do I install this product?
A: This product is easy to install, simply attach it to the existing line on your air conditioner and you’re done!
Q: Does this product fit in other types of lines?
A: Yes, this product is designed to fit 5/8″ and 3/4″ lines for air conditioners.
Q: Is this product durable?
A: Yes, it is made from a durable material that will stand up to wear and tear over time.
Additional Product Information
| Height | 1 |
| Length | 6.5 |
| Weight | 0.02 |
| Width | 3.5 |
G Green Drain Waterless Trap Seal 3 Inch
The G Green Drain Waterless Trap Seal is a great solution for all your floor drain odor issues. This 3 Inch Connection device blocks and prevents things from coming up through floor drains and provides improved drainage quality with simple installation. The one-way valve creates an effective seal to eliminate the odor and make your home or office smell fresh.
Why We Like This
One way valve creates seal to eliminate floor drain odor issues
Prevents and blocks things from up through floor drains
Simple installation & improved drainage quality
3 Inch Connection
Environmentally friendly design
Common Questions & Answers
Q: How easy is the G Green Drain Waterless Trap Seal to install?
A: It’s incredibly easy to install – it simply requires a few basic tools and some basic knowledge of plumbing. The instructions provided make it easy to understand.
Q: Does this product require any maintenance?
A: This product requires no maintenance – once it’s installed, it will work effectively without any additional effort on your part.
Q: Does this product have any environmental benefits?
A: Yes, the G Green Drain Waterless Trap Seal has been designed with an environmentally friendly approach in mind. It helps reduce water waste by preventing water from entering the drain and helps reduce odors that can be harmful to the environment.
Additional Product Information
| Length | 3 |
| Weight | 0.220462262 |
| Width | 3 |
Plumb Pak PP855-69 Air Gap for Standpipes Grey, FITS 1-1-2 AND 2 METAL OR PLASTIC STANDPIPES
The Plumb Pak PP855-69 Air Gap for Standpipes is an essential item for any home with a washing machine, dehumidifier, water filtration device, or water softener. This versatile air gap fits 1-1/2″ and 2″ metal or plastic standpipes and can be mounted at three different levels. It provides full backflow and anti-siphon protection to prevent wastewater from getting into the water supply, as well as more than twice the code-required minimum air gap opening. It’s UPC listed and tested for compliance to IPC and NSF standards, making it a great choice for protecting your plumbing system.
Why We Like This
Backflow Protection: Provides full backflow and anti-siphon protection to prevent wastewater from getting into water supply.
Easy to Install: Fits 1-1/2-in and 2-in metal or plastic standpipes, can be mounted at 3 different levels.
Standard Design: Allows soft rubber washer hose or aluminum washer drain hook up to share standpipe with other air gap units, recommended usage 1 to 7 gallons/minute (3. 7 to 26. 5 liters/minute).
Various Applications: For use with washing machine discharge, dehumidifiers, water filtration devices, and water softeners.
Compliance: UPC listed and tested for compliance to IPC and NSF standards, provides more than twice the code-required minimum air gap opening.
Common Questions & Answers
Q: Does this air gap fit all types of standpipes?
A: Yes, the Plumb Pak PP855-69 Air Gap fits both 1-1/2″ and 2″ metal or plastic standpipes.
Q: Does it provide full backflow protection?
A: Yes, it provides full backflow protection as well as anti-siphon protection to prevent wastewater from getting into the water supply.
Q: How much does this product comply with IPC and NSF standards?
A: The Plumb Pak PP855-69 Air Gap is UPC listed and tested for compliance to IPC and NSF standards providing more than twice the code required minimum air gap opening.
Additional Product Information
| Height | 8.5 |
| Length | 2 |
| Width | 3.5 |
| Size | FITS 1-1/2″ AND 2″ METAL OR PLASTIC STANDPIPES |
Dual Air Gap for Water Softener and Reverse Osmosis with 1-1-2 inch and 3-8 or 1-4-inch inlets 1-1-2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001)
Do you need to connect your water softener or reverse osmosis system to a standpipe? The Dual Air Gap for Water Softener and Reverse Osmosis with 1-1/2 inch and 3/8 or 1/4-inch inlets, 1-1/2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001) is the perfect solution. It is easy to install, has a secure standpipe connection, splash protection, quiet operation and is UPC Listed, IPC and NSF tested.
Why We Like This
Easy to Connect: The air gap has a 1/2-inch OD inlet port for 1/2 inch PVC pipe connection that accommodates any 1/2 inch slip joint adapters including a threaded end, barb connection, and a quick connect for PEX tubing. A 3/8 inch inlet port is also provided for RO systems.
Standpipe Connection: The air gap inserts directly into the 1-1/2 inch and 2-inch standpipes. The body of the air gap provides stops to ensure secure placement. It can be glued in place with plastic standpipes using regular PVC adhesive.
Splash Protection: Splash guards are an integral part of the design which can be seen through the side air gap window. During water softener operation, an initial discharge surge can create splashing which is prevented with the splash shield feature of this air gap.
Quiet Operation: To avoid excessive noise it is recommended to use 22 degrees elbow inline with standpipe to avoid direct drainage to P-trap which should be located at least 12 inches from the air gap as well.
Certification: This air gap is legal to install in any state as it is UPC Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested ensuring safety of users while providing consistent performance across every manufactured lot.
Common Questions & Answers
Q1: Is this compatible with my water softener system?
A1: Yes! This air gap has a 1/2 inch OD inlet port for 1/2 inch PVC pipe connection that accommodates any 1/2 inch slip joint adapters including a threaded end, barb connection, and a quick connect for PEX tubing making it compatible with most water softener systems.
Q2: What size standpipe does this fit into?
A2: This fits into both 1-1/2 or 2-inch standpipes allowing flexible installation options depending on the size of the pipe available at your location. Q3: Does this come certified?
A3: Yes! It is UPC Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested ensuring safety of users while providing consistent performance across every manufactured lot making it legal to install in any state.
Additional Product Information
| Height | 2.25 |
| Length | 4.25 |
| Width | 2.25 |
Benefits of air gap floor drain
1. Prevents the potential for backflow of contaminated water into plumbing fixtures and systems.
2. Reduces the risk of cross-contamination between different water sources.
3. Improves overall sanitation in the building or structure by ensuring proper drainage of wastewater away from food-handling areas.
4. Helps to ensure that any hazardous materials entering the drainage system are adequately contained to prevent harm to personnel and equipment.
5. Enhances energy efficiency by preventing warm or hot water from entering the cold water supply lines, which can also help reduce water heating costs.
6. Increases safety by providing a safe and effective way to manage wastewater without having to manually open and close valves or gates in order to divert the flow of water away from hazardous areas or zones.
Buying Guide for air gap floor drain
What is an Air Gap Floor Drain?
An air gap floor drain is a type of plumbing fixture designed to provide an air gap between the main water line and the drain. This helps to prevent drain backflow, which can cause flooding and other damage to your home. It also helps reduce sewer gas odors and other contaminants from entering your home. Air gap floor drains are typically installed beneath bathroom sinks, showers, and laundry tubs.
How Does an Air Gap Floor Drain Work?
Air gap floor drains work by providing an air space between the main water line and the drain pipe connected to it. This prevents any backflow of water or contaminated liquids from entering your home. The air gap also prevents any sewer gas odors from entering your home by providing a venting system.
Benefits of Installing an Air Gap Floor Drain
Installing an air gap floor drain provides several benefits for homeowners:
– Helps reduce the risk of flooding in your home due to backflow of water or contaminated liquids
– Prevents unpleasant odors from entering your home due to sewer gases
– Keeps insects, vermin, and other pests out of your plumbing system
– Provides a safe and effective way to dispose of wastewater without having to pay costly plumbing fees
Things To Consider Before Installing An Air Gap Floor Drain
Before installing an air gap floor drain, there are several factors that you should consider:
– The size and location of the drainage area An air gap floor drain needs enough space for it to fit properly. It should also be located at least 18 inches away from any walls or fixtures in order for it to function properly.
– Your local building code Make sure that you check with your local building code before installing an air gap floor drain in order to ensure that you are following all regulations.
– The materials used There are different types of materials available for air gap floor drains such as PVC, cast iron, and brass. Choose one that will be durable enough for long-term use in your plumbing system.
Installation Process Of An Air Gap Floor Drain
Installing an air gap floor drain is not difficult but there are some steps you should take before starting the installation process:
– Turn off the main water supply You need to turn off the main water supply before starting the installation so that no water will flow while you are working on it.
– Prepare the area Clear away any debris or dirt that may be present in order for you to access all parts needed for installation easily.
– Install the components – Install all components according to manufacturers instructions such as pipes, washers, nuts, etc Make sure everything is properly tightened in order for it to function correctly.
Maintenance For An Air Gap Floor Drain
Regular maintenance is important when it comes to keeping your air gap floor drain functioning properly:
– Inspect regularly – Inspect your air gap floor drain on a regular basis for any signs of corrosion or wear & tear which may indicate a need for repairs or replacement parts. – Clean regularly – Make sure you clean out any debris or sediment that may have collected inside the pipes by using a vacuum cleaner or running hot water through them regularly. This will help keep them functioning efficiently over time. – Replace damaged parts – If any parts become worn out or damaged, replace them immediately as they can cause further damage if left unattended for too long
The air gap floor drain is an effective way to prevent moisture and water damage in a home or business. It is designed to create an air pocket between the drain and the floor, allowing any water that enters the drain to escape without flooding the floor. The air gap also prevents any sewer gases from entering the building. With its ability to protect against flood damage and sewer gases, the air gap floor drain is an excellent choice for bathrooms, kitchens, and other areas where standing water may be a problem.
