Introducing the LS Throttle Body Spacer, a device designed to increase engine performance and efficiency. This innovative spacer is designed to improve air flow through the engine, resulting in increased power and torque. With its simple yet effective design, the LS Throttle Body Spacer provides an effective and economical solution for those looking to boost their engine’s performance. By introducing an element of perplexity and burstiness into the air flow, this spacer can make a big difference in your engine’s output. With its ability to improve air flow without compromising on efficiency, the LS Throttle Body Spacer is sure to be a great addition to your vehicle.
Why ls throttle body spacer Is Necessary?
A throttle body spacer is necessary when installing an LS engine into a different vehicle. It is used to make sure the engine has enough air flow and to help prevent backfiring. The spacer also helps balance the air/fuel mixture in the cylinders, allowing for more efficient combustion. This can result in increased horsepower and torque, as well as better fuel economy.
Comperision Chart for ls throttle body spacer
NICECNC Throttle Body Spacer Compatible with Chevrolet Silverado 1500 4.8 5.3 6.0 6.2 2007-2013, Avalanche 5.3 6.0 2007-2012, Compatible with GMC Sierra 1500 4.8 5.3 6.0, 2007-2012, Blue
ICT Billet LSA LS3 Throttle Body Spacer 1/2 inch Adapter LS Clearance 4 Bolt TB DBW 551757-5
ICT Billet LSA LS3 Throttle Body Spacer 1 inch Adapter LS Clearance 4 Bolt TB DBW 551757-1
ICT Billet 102mm Throttle Body 1/2 inch Spacer Sheet Metal Intake Manifold ICT Billet Engine Billet Aluminum Compatible with Chevy GMC 551563-LS01S5
92mm Aluminum Throttle Body Spacer Adapter Intake Manifold Fit for LS LS1 LS2 LS3 LS4 LS6 LS7 LSX
NICECNC Throttle Body Spacer Compatible with Chevrolet Silverado 1500 4.8 5.3 6.0 6.2 2007-2013 Avalanche 5.3 6.0 2007-2012, Compatible with GMC Sierra 1500 4.8 5.3 6.0, 2007-2012, Blue
Are you looking for a way to improve the performance of your Chevrolet Silverado 1500 4.8 5.3 6.0 6.2 2007-2013, Avalanche 5.3 6.0 2007-2012 or GMC Sierra 1500 4.8 5.3 6.0 2007-2012? The NICECNC Throttle Body Spacer is the perfect choice! This spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm thanks to its spiral design that increases intake velocity and improves low-end torque and throttle response. It’s easy to install, so you can get started right away and experience the power gains that come with additional intake or exhaust mods as well as forced induction!
Why We Like This
Enhances off-idle torque from 800 rpm to approx 3,000 rpm
Spiral design increases intake velocity
Improves low-end torque & throttle response
Easy to install
Experiences power gains with additional intake or exhaust mods & forced induction
Common Questions & Answers
Q: Does this work on other vehicles?
A: Yes, this spacer is compatible with Chevrolet Silverado 1500 4.8 5.3 6.0 6.2 2007-2013, Avalanche 5.3 6.0 2007-2012, and GMC Sierra 1500 4.8 5.3 6/0 2007-2012 vehicles as well as some other models of trucks and SUVs from GMC and Chevrolet such as Yukon, Escalade, Suburban Tahoe and Trailblazer models from 1999 – current models years (check your vehicle compatibility before purchasing).
Q: Does installation require any special tools?
A: No special tools are required for installation but it is recommended that you use thread sealer on the mounting bolts for extra security when installing this spacer onto your vehicle’s throttle body unit – however this is optional and not required for installation of this product onto your vehicle’s throttle body assembly unit/sensor/connector unit(s). If you’re unsure about installation be sure to consult an experienced automotive mechanic who can properly install it onto your vehicles engine bay area safely and securely without damaging any of the components involved in the process (i..e manifold/intake runners etc).
Q: What kind of performance increase can I expect from using this spacer?
A: You should experience a noticeable increase in power output over stock levels due to increased air flow into the engine bay area caused by increased velocity thanks to the spiral design which also helps improve low end torque and throttle response which will help make driving more enjoyable overall!
Additional Product Information
ICT Billet LSA LS3 Throttle Body Spacer 1-2 inch Adapter LS Clearance 4 Bolt TB DBW 551757-5
The ICT Billet LSA LS3 Throttle Body Spacer is a true game changer for the modern vehicle. This 1/2 inch adapter spacer is designed to provide clearance for the 4 bolt TB DBW and make installation of your new throttle body easier than ever. It’s made from aerospace grade billet aluminum, so you know it’s built to last and is sure to upgrade your engine’s performance. Plus, all the necessary bolts and an Oring seal are included with your purchase.
Why We Like This
Made from aerospace grade billet aluminum for superior strength and durability
Compatible with 4 bolt throttle bodies
Comes with all bolts and an Oring seal needed for installation
Spaces throttle body out 1/2 inch to provide more clearance
Has a 92mm through hole for easy installation
Common Questions & Answers
Q: Is this spacer compatible with my vehicle?
A: Yes, this spacer is compatible with 4 bolt throttle bodies, so it should work fine in your vehicle.
Q: Will this spacer increase my engine’s performance?
A: Yes, by spacing out the throttle body 1/2 inch you can expect improved air flow which should result in better engine performance.
Q: Does this product come with all the necessary hardware?
A: Yes, all bolts and an Oring seal are included so you don’t have to worry about purchasing additional parts.
Additional Product Information
ICT Billet LSA LS3 Throttle Body Spacer 1 inch Adapter LS Clearance 4 Bolt TB DBW 551757-1
The ICT Billet LSA LS3 Throttle Body Spacer is an essential part of any car enthusiast’s toolkit. This 1 inch adapter boasts a number of features that make it an attractive choice for those looking to get the most out of their engine. It’s crafted from aerospace grade, USA produced billet aluminum and is compatible with 4 bolt throttle bodies, making it both durable and reliable. The spacer also comes with all bolts and an O-ring seal needed for installation, saving you time and effort on your next project.
Why We Like This
Includes Adapter Plate All Bolts and an Oring Seal Needed for Installation
Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum
Spaces Throttle Body Out 1 Inch
Compatible with 4 Bolt Throttle Bodies
Has 92mm Through Hole
Common Questions & Answers
Q: What is the ICT Billet LSA LS3 Throttle Body Spacer?
A: The ICT Billet LSA LS3 Throttle Body Spacer is a 1 inch adapter designed to provide extra clearance between the throttle body and other components in your engine bay. It’s made from aerospace grade billet aluminum and comes with all necessary bolts and an O-ring seal needed for installation.
Q: What are the benefits of using this spacer?
A: The ICT Billet LSA LS3 Throttle Body Spacer provides extra clearance between the throttle body and other components which can help reduce heat buildup as well as improve overall performance. It also has a 92mm through hole which allows for more efficient air flow.
Q: Does this spacer fit 4 bolt throttle bodies?
A: Yes, this spacer is specifically designed to fit 4 bolt throttle bodies.
Additional Product Information
ICT Billet 102mm Throttle Body 1-2 inch Spacer Sheet Metal Intake Manifold ICT Billet Engine Billet Aluminum Compatible with Chevy GMC 551563-LS01S5
The ICT Billet 102mm Throttle Body 1/2 inch Spacer Sheet Metal Intake Manifold is a great choice for anyone looking to boost the performance of their Chevy or GMC engine. This high-quality billet aluminum spacer is made in Wichita, Kansas from aerospace grade, USA produced, 6061-T6 aluminum and is compatible with all factory LS, 4 bolt throttle bodies (except LS4). This spacer will space your 4 bolt throttle body outward .5″ inch and comes with 1 o-ring seal and hardware for easy installation.
Why We Like This
Made in the USA using aerospace grade aluminum
Compatible with all factory LS, 4 bolt throttle bodies (except LS4)
Easy installation with included o-ring seal and hardware
Spacing your 4 bolt throttle body outward .5″ inch increases air flow
High quality billet aluminum construction ensures longevity and reliability
Common Questions & Answers
Q: Is this product compatible with all Chevy or GMC engines?
A: Yes, this product is compatible with all Chevy or GMC engines except LS4.
Q: What is included with the spacer?
A: The ICT Billet 102mm Throttle Body spacer includes 1 spacer (1/2″ thick) with 1 o-ring seal & hardware.
Q: Does this product increase air flow?
A: Yes, spacing your 4 bolt throttle body outward .5″ inch increases air flow.
Additional Product Information
| Weight | 0.37 |
92mm Aluminum Throttle Body Spacer Adapter Intake Manifold Fit for LS LS1 LS2 LS3 LS4 LS6 LS7 LSX
Are you looking for a way to improve the performance of your LS engine? Then you need this 92mm aluminum throttle body spacer adapter intake manifold from AJP Distributors. Designed specifically for LS engines, this spacer is sure to bring your engine to life and give it the power youve been looking for. Plus, with its easy installation and durable aluminum construction, you can trust that this spacer will last you a long time.
Why We Like This:
Easy installation: This throttle body spacer adapter is designed to be easy to install, so you wont need to worry about any complicated instructions or expensive tools.
Durable construction: Made from aluminum, this spacer is built to last and can withstand the heat and pressure of your engine.
Improved performance: With this spacer installed, your LS engine will be able to reach its full potential when it comes to power and speed.
Versatile design: This throttle body spacer adapter is designed specifically for LS engines, so it will fit in most vehicles with an LS engine.
Brand name quality: AJP Distributors is a trusted name in automotive parts and accessories, so you know that this spacer will be of the highest quality.
Common Questions & Answers:
Q1: What type of material is the throttle body spacer made of?
A1: The throttle body spacer is made out of aluminum, making it both strong and lightweight.
Q2: Is the installation process complicated?
A2: No! The installation process is easy and should only take a few minutes of your time.
Q3: Will this fit on all LS engines?
A3: Yes! This throttle body spacer adapter has been designed specifically for LS engines, so it should fit in most vehicles with an LS engine.
Additional Product Information
Benefits of ls throttle body spacer
1. Improved Airflow: Installing an LS throttle body spacer creates a larger surface area for incoming air, allowing for better and more efficient airflow.
2. Increased Horsepower and Torque: The improved airflow from the throttle body spacer allows your engine to produce more power and torque, resulting in improved performance.
3. Better Fuel Economy: With more efficient airflow, the engine is able to burn fuel more efficiently, resulting in increased fuel economy.
4. Reduced Emissions: The improved air/fuel mixture from the increased efficiency of the throttle body spacer can help reduce emissions from your vehicle.
5. Easier Installation: LS throttle body spacers are relatively simple to install, making it an easy upgrade for those who are looking to increase performance without having to do extensive modifications or tuning.
Buying Guide for ls throttle body spacer
What is a Throttle Body Spacer?
A throttle body spacer is an aftermarket automotive component used to increase the air-flow within the intake system of an internal combustion engine. It works by creating a larger volume of air between the throttle body and the intake manifold, allowing more air to enter the engine. The increased air flow results in improved engine performance, increased power and torque, and improved fuel economy.
Benefits of a Throttle Body Spacer
There are several benefits to installing a throttle body spacer on your vehicle:
-Increased horsepower and torque A throttle body spacer increases the amount of air entering your engine, resulting in more efficient combustion and ultimately more power for your vehicle.
-Improved fuel economy By allowing more air into the engine, a throttle body spacer also helps improve fuel efficiency by allowing for better combustion of fuel.
-Easy installation – Most throttle body spacers are designed with simple bolt-on installation that can be done in minutes with basic hand tools.
Types of Throttle Body Spacers
There are two main types of throttle body spacers: open-plenum and helix designs. Open plenum designs create an increased volume of air between the intake manifold and valve cover while helix designs incorporate a helical pattern that creates turbulence as it passes through the spacer. Both types have their own benefits depending on your application.
Compatibility
When purchasing a throttle body spacer it is important to make sure it is compatible with your vehicles make, model, year, and engine type. Many spacers are universal but some require specific fitment for certain vehicles so double check before purchasing to ensure you get the right one for your vehicle.
Cost
Throttle body spacers can range from as little as $30 up to several hundred dollars depending on quality, material used, and other factors. Most people should be able to find one that fits their budget without sacrificing quality or performance.
The LS Throttle Body Spacer is a great way to increase your engine’s performance and give it more power. It is relatively easy to install and has proven results that can be seen in improved throttle response, better fuel economy, and increased horsepower. The spacer also helps reduce emissions and provides a better sound from the engine. Overall, the LS Throttle Body Spacer is an excellent addition to any LS motor, making it a great choice for those looking to increase their engine’s performance.
