1. Park your trailer on level ground and set the emergency brake.
2. Locate the suspension eye bolts on each side of the trailer frame. These are typically located near the axle.
3. Place the jack under the frame of the trailer and raise it until the frame is level with the ground.
4. Insert the bolts through the center of the lift kit’s brackets and thread them into the suspension eye bolts. Tighten each bolt until it is snug.
5. Lower the jack so that the weight of the trailer rests on the brackets.
6. Repeat steps 3-5 on the other side of the trailer.
7.
Why Travel Trailer Lift Kit Is Necessary?
Lifting your trailer makes it easier to move around and also improve its stability. A travel trailer is a big investment, and you want to make sure that it lasts for as long as possible. A lift kit will help to protect your trailer from wear and tear, and it will also make it easier to maneuver in tight spaces.
Our Top Picks For Best Travel Trailer Lift Kit
Best Travel Trailer Lift Kit Guidance
Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes
Looking for a way to make lifting and lowering your RV steps a breeze? Check out the Solid Step Wide Lift Assist Kit 29″-32″! This handy little kit comes with integrated gas struts that make your RV steps virtually weightless, meaning you can lift and lower them with a single finger. Not to mention, the Lift Assist Kit gives you more control when operating your RV steps, making it a great choice for RVers of all ages and abilities. Plus, the kit comes with all the necessary mounting hardware for a quick and easy installation.
Common Questions on Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes
• What are the dimensions of the Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes?The dimensions of the Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes are 29″ wide x 32″ long.
• What is the weight capacity of the Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes?
The weight capacity of the Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes is 500 lbs.
• What are the dimensions of the foot pads on the Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes?
The dimensions of the foot pads on the Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs, Travel Trailers and Motorhomes are 4″ wide x 4″ long.
• What is the weight of the Solid Step Wide Lift Assist Kit 29″-32″ for 5th Wheel RVs,
Why We Like This
• 1. The Solid Step Lift Assist Kit makes it easy to open and close your RV steps with just one finger.• 2. The integrated gas struts make the steps virtually weightless, so you don’t have to worry about them being too heavy to open or close.• 3. The kit helps eliminate strain on your muscles and joints when lifting or lowering the steps, making it a great option for RV owners of all ages and abilities.• 4. The Lift Assist Kit gives you more control when handling your RV steps, so you can be sure they’re in the right position before you use them.• 5. The kit comes with all the necessary mounting hardware for a quick, DIY installation.
Additional Product Information
| Color | Black |
| Weight | 51 Pounds |
RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA
If you’ve got a #10 Torflex axle on your RV that’s rated for between 2,300 and 4,000 pounds, then you’re in luck. The RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA has got you covered. This kit comes with everything you need to safely and quickly install it, including metal spacers and mounting hardware. It’s also only compatible with side mount brackets on the trailer frame – so if you’ve got a top mounted axle, you’re out of luck.
Common Questions on RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA
• How do I install the RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA?First, remove the old springs from your RV’s axle. Next, insert the new springs into the axle and secure them with the provided U-bolts. Finally, reattach the wheels to the axle and lower your RV back onto the ground.
• Where is the RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA made?
The RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA is proudly made in the USA!
• Why should I choose the RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA over other brands?
The RecPro Single Axle Torflex Lift Kit 3″ Lift | RV Axle Lift Kit | Made in USA is a high-quality, durable product that is backed by a 5-year warranty. Additionally, it is easy to install and comes with everything you need for a successful installation.
• What are the dimensions of the Rec
Why We Like This
• Lift kit is compatible with #10 Torflex axles• Weight capacity of 2,300 to 4,000 pounds• Includes all necessary hardware for installation• Frame spacers have 8 inch bolt hole spacing• Only compatible with side mount brackets
Camco EAZ LIFT Elite Weight Distribution Hitch, 1200lb Kit (48069)
The Camco EAZ LIFT Elite Weight Distribution Hitch is the ideal solution for towing your trailer. The hitch comes with a pre-installed 2-5/16″ hitch ball and sway control ball, so you don’t have to worry about torquing them to specification. The U-bolts and chain package are also pre-installed on the spring bars, making installation a breeze. The hitch has a maximum tongue weight capacity of 1,200 lbs and a maximum gross weight rating of 12,000 lbs. The kit also includes an adjustable ball mount, so you can fine-tune the height of your trailer.
Common Questions on Camco EAZ LIFT Elite Weight Distribution Hitch, 1200lb Kit (48069)
• What are the dimensions of the product?The product is 16.5 x 8.3 x 8.3 inches.
•What is the weight capacity of the product?
The product has a weight capacity of 1200lbs.
•What is the tongue weight capacity of the product?
The tongue weight capacity of the product is 120lbs.
•What is the maximum drop of the product?
The maximum drop of the product is 4 inches.
•What is the maximum rise of the product?
The maximum rise of the product is 4 inches.
Why We Like This
• 1. Trailer Sway Control Kit• 2. Pre Installed Components• 3. Maximum Weight Capacity• 4. Kit Includes• 5. Quality Products
Additional Product Information
| Color | black |
| Height | 33.5 Inches |
| Length | 7.44 Inches |
| Weight | 1 Pounds |
U-Bolt Mounting Kit for 3,500 lb Trailer Axles with 2-3/8 Inch Round Tube Diameter
The U-bolt mounting kit for 3,500 lb trailer axles with 2-3/8 inch round tube diameter is a great way to economically repair your trailer. The kit includes 4 U-bolts, 2 tie plates, 2 spring seats, and 8 nylon lock nuts. The U-bolt measurements are 5 inches long and 294 inches wide with 1/2-20 thread. The tie plate measurements are 592 inches long, 375 inches wide, and 294 inches wide with hole centers. The nylon lock nut measurement is 1/2″-20 thread. This kit is perfect for those on the road repairs.
Common Questions on U-Bolt Mounting Kit for 3,500 lb Trailer Axles with 2-3/8 Inch Round Tube Diameter
• Can I use this U-bolt mounting kit for 3,500 lb trailer axles with 2-3/8 inch round tube diameter on a 2-inch square tube?No, this kit is only designed for use with 3,500 lb trailer axles with 2-3/8 inch round tube diameters.
Why We Like This
• 1. U bolt mounting kit for 3,500 lb trailer axles with 2 3/8 inch round tube diameter• 2. Kit includes 4 U bolts, 2 tie plates, 2 spring seats, and 8 nylon lock nuts• 3. U bolt measurements: 5 inch length, 2 3/4 inch width, 1/2 20 thread• 4. Tie plate measurements: 5 7/8 inch length, 3 3/4 inch width, 2 3/4 inch hole centers• 5. Nylon lock nut measurement: 1/2″ 20 thread
Dexter K7138400 Conversion Kit
If you’re looking to convert your Dexter axle from leaf springs to coil springs, you’ll need the Dexter K7138400 Conversion Kit. This handy kit comes with everything you need to make the switch, including spring seats, nuts, U-bolts, tie plates, and an instruction sheet. With this complete kit, you can easily upgrade your Dexter axle to coil springs, giving you a smoother ride and improved performance.
Common Questions on Dexter K7138400 Conversion Kit
• What is the Dexter K7138400 Conversion Kit?The Dexter K7138400 Conversion Kit is a kit that allows you to convert your Dexter laundry machines from liquid soap to powder soap.
• How do you convert your Dexter laundry machine from liquid soap to powder soap?
First, you’ll need to purchase the Dexter K7138400 Conversion Kit. This kit includes a powder soap dispenser and a adapter hose. Next, you’ll need to remove the liquid soap dispenser from your machine. To do this, simply unscrew the dispenser from the machine. Once the liquid soap dispenser is removed, screw the powder soap dispenser into the machine in its place. Finally, attach the adapter hose to the powder soap dispenser. This will allow the powder soap to be dispensed into your machine.
Why We Like This
1. The Dexter Conversion Kit contains all the necessary parts to convert a standard trailer to Dexter axles.
2. The kit includes two spring seats, eight nuts, four U bolts, two tie plates, and an instruction sheet.
3. The spring seats are designed to provide a smooth, comfortable ride.
4. The U bolts are made of durable materials and provide a secure connection between the axle and the trailer frame.
5. The instruction sheet provides clear and concise instructions for converting a trailer to Dexter axles.
Additional Product Information
| Color | Regular |
| Height | 2.3 Inches |
| Length | 11.1 Inches |
| Weight | 6.8 Pounds |
Benefits of Travel Trailer Lift Kit
A best travel trailer lift kit is a must-have accessory for any serious RVer. It makes life on the road much easier by allowing you to level your camper with ease. Not only does it improve the look of your rig, but it also makes setting up camp a breeze.
There are many different brands and styles of lift kits available, so finding one that fits your needs shouldn’t be difficult. The most important thing to consider when choosing a kit is how much weight it can support. Some models are designed for lighter campers while others can accommodate heavier rigs.
Another factor to consider is whether or not you want a manual or electric model. Electric kits are obviously more expensive, but they save time and effort in the long run. Manual models require some cranking, but they’re still easy to use and usually quite affordable..
Buying Guide for Best Travel Trailer Lift Kit
When you are RVing, one of the most annoying things can be having to constantly adjust your trailer hitch. If you have a travel trailer, then you know how important it is to have a level towing experience. The best way to achieve this is by using a lift kit.
A travel trailer lift kit helps to take some of the strain off of your arms and shoulders by providing support for the tongue weight of your trailer. It also allows you to keep your RV level when traveling down the road. This results in improved handling and braking, and makes it easier on your tow vehicle and tires.
It is important to choose the right size lift kit for your travel trailer. You will need to know the tongue weight of your trailer, as well as the length and width of your A-frame coupler. Once you have these measurements, you can easily find a lift kit that will work perfectly for your needs.
Installing a travel trailer lift kit is relatively easy and can usually be done in about an hour or so. Most kits come with all of the necessary hardware and instructions needed for installation. If you are not confident in your ability to install the kit yourself, there are many reputable RV dealerships and service centers that would be happy to do it for you.
Once installed, using a travel trailer lift kit is simple – just hook up your trailer as usual and enjoy improved handling on the road!
Frequently Asked Question
What is the best travel trailer lift kit?
There is no definitive answer to this question as it depends on a number of factors, such as the type and size of travel trailer, the terrain you’ll be traveling over, and your personal preferences. That said, some popular travel trailer lift kits include the Happijac 4-Point Lifting System and the Reese Straight-Line Sway Control.
What are the features of the best travel trailer lift kit?
The best travel trailer lift kit will have a few key features that will make it stand out from the rest. First, it will be made from high-quality materials that will be durable and long-lasting. Second, it will be easy to install and use. Third, it will be adjustable to fit a variety of different travel trailers. Lastly, it will come with a warranty so that you can be sure it will work as advertised.
What are the benefits of using a travel trailer lift kit?
There are many benefits to using a travel trailer lift kit. Some of these benefits include: 1. Increased safety when loading and unloading your travel trailer. 2. Easier loading and unloading of your travel trailer. 3. More stability for your travel trailer when it is parked. 4. The ability to store your travel trailer in a smaller space.
How does a travel trailer lift kit work?
A travel trailer lift kit is a device that is used to raise and lower the trailer. It is generally operated by a hand crank or a motor.
Where can I find a travel trailer lift kit?
There are a few different places you can find a travel trailer lift kit. One option is to look online, on websites like Amazon or eBay. Another option is to go to a local RV dealer or an RV parts store.
Conclusion
Best travel trailer lift kit offers safe and easy way to store and transport your trailer. It is made of high quality materials that can withstand heavy weights and provide years of service. The kit includes all necessary hardware and instructions for easy installation.
