There are a few different types of valve spring pressure testers on the market, but the most popular is the hydraulic type. This type of tester uses a hydraulic system to apply pressure to the valve spring. The amount of pressure applied can be adjusted to get an accurate reading.
Another type of valve spring pressure tester is the pneumatic type. This tester uses air pressure to apply force to the valve spring. Pneumatic testers are typically less expensive than hydraulic testers, but they can be less accurate.
The best valve spring pressure tester for your needs will depend on a number of factors, including accuracy, price, and ease of use. If you need an extremely accurate reading, you may want to spend more money on a higher-end model. However, if you just need a general idea of the force exerted by your springs, a less expensive model will suffice.
Why Valve Spring Pressure Tester Is Necessary?
Valve spring pressure testing is necessary in order to ensure the correct amount of pressure is being applied to the valves. This will prevent premature wear on the valves and prevent engine damage.
Our Top Picks For Best Valve Spring Pressure Tester
Best Valve Spring Pressure Tester Guidance
Moroso 62390 300 lbs Valve Seat Pressure Tester
The Moroso 62390 Valve Seat Pressure Tester is the original tool for checking valve seat pressure on an assembled engine. It has a built-in 300-lb reading scale and fits roller rockers on Small Block, Big Block, and 90° V6 Chevy; Ford 221-302, 351-400 SVO and Ford Windsor engines, and most other wedge-type engines. You can use it with Moroso Stud Mount Valve Spring Compressors No 62373 or No 62370 for the most accurate method of maintaining the valvetrain on a fully assembled engine.
Common Questions on Moroso 62390 300 lbs Valve Seat Pressure Tester
• What is the weight capacity of the Moroso 62390 valve seat pressure tester?300 lbs.
• What is the dimensions of the Moroso 62390 valve seat pressure tester?
10.5″ x 8″ x 6.5″
• How many times can the Moroso 62390 valve seat pressure tester be used?
Up to 5 times.
Why We Like This
• 1. The original tool for checking valve seat pressure on an assembled engine!• 2. Built in 300 lb reading scale• 3. Fits roller rockers on Small Block, Big Block, and 90° V6 Chevy; Ford 221 302, 351 400 SVO and Ford Windsor engines, and most other wedge type engines• 4. Use with Moroso Stud Mount Valve Spring Compressors No 62373 or No 62370 for the most accurate method of maintaining the valvetrain on a fully assembled engine.• 5. Part number: 62390. Fit type: Vehicle Specific. Package Weight: 085 pounds.
Additional Product Information
| Height | 11 Inches |
| Length | 2.75 Inches |
| Weight | 1.67 Pounds |
Universal Mini Valve Spring Pressure Tester Gauge – 0-700 PSI – 0-50 KG/CM2, Alternative For Part # 66834
A valve spring tester is an essential tool for any racer. It allows you to check the pressure of your springs, both at assembly and after use. Worn out springs can lead to a drop in performance, so it’s important to periodically check their pressure. The 66834 mini valve spring tester is a great affordable and portable option for testing springs. It has a wide range of 0-700 psi / 0-50 kg-cm2 and features double scale measuring units for easy reading. The hex-design body is also very versatile, so it can be used in a vise or an arbor press. To use, simply install the tester and a spring in a vice or arbor press and check the pressure at the spring’s installed and open heights. If you have any questions about our product, please don’t hesitate to contact us. We’re always happy to help!
Common Questions on Universal Mini Valve Spring Pressure Tester Gauge – 0-700 PSI – 0-50 KG/CM2, Alternative For Part # 66834
• What is the pressure range for this gauge?0-700 PSI
• What is the alternative for Part # 66834?
Universal Mini Valve Spring Pressure Tester Gauge – 0-700 PSI – 0-50 KG/CM2
• How many times should this process be repeated?
Five times
Why We Like This
• Tests springs with a wider range of 0 700 PSI• Double scale measuring units are easy to read• Features a rubber gauge protector to keep the gauge housing protected• Hex design body is very versatile and can be used in a vise or an arbor press• 100% satisfaction guarantee
Additional Product Information
| Height | 2.755905509 Inches |
| Length | 5.905511805 Inches |
66835 Mini Valve Spring Tester, 0-300 lbs./in. Range, 5LB Increments, Quick & Easy Way to Check Valve Spring Pressure
The 66835 Mini Valve Spring Tester is a quick and easy way to check your valve spring pressure. It can be used in a vise or an arbor press, and reads up to 300 pounds in 5 pound increments. This is a must-have item when rebuilding cylinder heads, upgrading camshafts, or when doing any valvetrain work.
Common Questions on 66835 Mini Valve Spring Tester, 0-300 lbs./in. Range, 5LB Increments, Quick & Easy Way to Check Valve Spring Pressure
• What is the range of this Mini Valve Spring Tester?The range of this Mini Valve Spring Tester is 0-300 lbs./in.
• How many increments are there on this Mini Valve Spring Tester?
There are 5LB increments on this Mini Valve Spring Tester.
• What is the quickest and easiest way to check valve spring pressure?
The quickest and easiest way to check valve spring pressure is with this Mini Valve Spring Tester.
Why We Like This
• 1. Mini valve spring tester for quick and easy spring pressure testing• 2. Can be used in a vise or an arbor press• 3. Reads up to 300 pounds in 5 pound increments• 4. Comes with a rubber gauge protector to prevent damage• 5. Constructed from aluminum alloy with brass internal components
66834 Universal Mini Valve Spring Tester 0-700lbs 0-50 KG/CM2
We all know that 66834 Universal Mini Valve Spring Testers are great for testing the pressure of springs, but did you know that they can also be used to recalibrate your pressure gauge? This handy little tool is perfect for any workshop, and it’s very easy to use. Simply place the tester in your vise or arbor press, and you’re ready to go. The hex-design body is very versatile, so you can use it in either a vise or an arbor press. And if you’re not 100% satisfied with this item, simply return it for a full refund in 30 days.
Common Questions on 66834 Universal Mini Valve Spring Tester 0-700lbs 0-50 KG/CM2
• What is the spring range for the 66834 Universal Mini Valve Spring Tester?The spring range for the 66834 Universal Mini Valve Spring Tester is 0-700lbs 0-50 KG/CM2.
• What is the maximum load that the 66834 Universal Mini Valve Spring Tester can handle?
The maximum load that the 66834 Universal Mini Valve Spring Tester can handle is 700lbs.
• What is the accuracy of the 66834 Universal Mini Valve Spring Tester?
The accuracy of the 66834 Universal Mini Valve Spring Tester is +/- 2%.
Why We Like This
• 1. Pressure range: 0 700 lbs/in• 2. Pressure tested: Variable• 3. Valve spring tester style: Mini for vise/arbor• 4. Recalibration feature• 5. Rubber gauge protector
LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester , RED
Do you like your engines revving high and your valves slamming shut with the force of a thousand suns? If so, you need the LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester! This bad boy can test valve spring pressure up to 100lbs per square inch, meaning you can finally find out just how much force your valves are really capable of withstand. Best of all, it’s red, because everyone knows that red is the fastest color!
Common Questions on LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester , RED
• What is the LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester?The LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester is a device that is used to test the pressure of valve springs in order to ensure that they are within the specified range.
• Why is it important to test the pressure of valve springs?
It is important to test the pressure of valve springs because they are responsible for holding the valves in place and maintaining the proper seal between the valves and the cylinder head. If the pressure is too low, the valves may leak, and if the pressure is too high, the valves may become damaged.
• How often should the LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester be used?
The LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester should be used every time the valve springs are replaced or adjusted.
• What is the proper pressure range for valve springs?
The proper pressure range for valve springs is between 40 and 60 pounds per square inch.
• What will happen if the pressure of the valve springs is outside of the specified range?
A
Why We Like This
• 1. Tests valve springs for proper seat pressure.• 2. Quick and easy to use.• 3. Lightweight and portable.• 4. Made in the USA.• 5. 1 year warranty.
Additional Product Information
| Color | RED |
| Height | 4.3 Inches |
| Length | 12 Inches |
| Weight | 2.85 Pounds |
Benefits of Valve Spring Pressure Tester
As an engine component, the valve spring is constantly subjected to high temperatures and pressures. In order to ensure that your engine is running at its best, it’s important to regularly check the condition of your valve springs using a quality valve spring pressure tester.
There are many benefits to using a valve spring pressure tester, including:
1. You can quickly and easily identify problems with your valve springs. If a spring is damaged or broken, it can cause all sorts of problems with your engine’s performance. By testing the springs on a regular basis, you can avoid these issues altogether.
2. Valve spring testers help you keep track of wear and tear on your engine components. Over time, all engines will experience some degree of wear and tear – but by testingyour valvesprings regularly, you can keep an eye on how much damage has been doneand take steps toreplace thembefore they break completelyand cause serious damage toyour engine block or heads..
Buying Guide for Best Valve Spring Pressure Tester
A valve spring pressure tester is a device used to measure the amount of force required to compress a valve spring. It is an important tool for engine builders and racers who want to determine the correct spring rate for their application. There are many different types of valve spring testers on the market, but they all work in basically the same way.
To use a valve spring pressure tester, first you need to install the appropriate adapter for your engine onto the tester. Then you thread the compressed valve spring onto the adapter and tighten it down. Once the spring is installed, you can press on the release button to slowly decompress the spring and measure its pressure.
There are a few things to keep in mind when selecting a valve spring pressure tester. First, you need to make sure that the tester you choose can handle the amount of pressure your springs will be subjected to. Second, you need to consider how accurate you need the readings to be. And finally, you need to decide whether you want a dial or digital readout.
The most important thing when using a valve spring pressure tester is to always follow the manufacturer’s instructions carefully. This will help ensure that you get accurate readings and don’t damage your springs in the process.
Frequently Asked Question
What is the best valve spring pressure tester for the money?
There is no definitive answer to this question as it largely depends on personal preferences and budget. Some popular valve spring pressure testers include the Supertech Valve Spring Tester, the K-Line Valve Spring Tester, and the JMC Valve Spring Tester.
What is the best valve spring pressure tester for the home mechanic?
Some popular valve spring pressure testers include the JIMS Machinist Valve Spring Tester and the Motion Pro Valve Spring Tester.
What is the best valve spring pressure tester for the professional mechanic?
There is no definitive answer for this question as it depends on the specific needs of the professional mechanic. Some popular valve spring pressure testers include the Kwik-Way Valve Spring Tester, the Snap-on Valve Spring Tester, and the OTC Valve Spring Tester.
What are the features of the best valve spring pressure tester?
There are a few key features to look for when purchasing a valve spring pressure tester. Firstly, you want a tester that is accurate and precise. Secondly, you want a tester that is easy to use and read. Finally, you want a tester that is durable and will last for many years.
What are the benefits of using the best valve spring pressure tester?
There are many benefits to using the best valve spring pressure tester. Some of these benefits include: 1. Accurate measurements: A good quality valve spring pressure tester will provide you with accurate measurements, meaning you can trust the results you get. 2. Repeatability: A good valve spring pressure tester will allow you to take multiple readings and get consistent results each time. This is important when trying to diagnose a problem or make adjustments to your engine. 3. Durability: A well-made valve spring pressure tester will be built to last, meaning you won’t have to replace it as often. 4. Ease of use: A good valve spring pressure tester should be easy to use, so you can get the information you need quickly and without hassle.
Conclusion
Dear Customer,
Thank you for your interest in our best valve spring pressure tester. After hearing your concerns and needs, we strongly believe that our product is the one that fits you the best.
Here are the reasons why:
-It can accurately test the pressure of the valve springs on cylinder heads, intake manifolds, and exhaust manifolds.
-The readings are displayed on a large, easy-to-read LCD screen.
-It is durable and built to last, with a heavy duty construction.
It comes with a one year warranty.
-Our customer service team is friendly and knowledgeable, and will be happy to help you with any questions or concerns you may have.
We want what’s best for our customers, and we believe that our best valve spring pressure tester is just that. We hope that you will give it a try and see for yourself how it can benefit you and your business.
