A truck u joint puller is a versatile tool used to remove and replace universal joints in vehicles. It is a must-have for any professional or do-it-yourself mechanic who needs to complete a job quickly and efficiently. With this powerful device, you can easily remove the old joint and replace it with a new one without damaging any other components. Its simplicity and high degree of perplexity make it an ideal choice for almost any automotive repair job! Burstiness also makes this tool especially useful, as it can adjust to different sizes and shapes of universal joints in just a few seconds. Whether you’re working on an older model or the latest vehicle technology, the truck u joint puller is the perfect tool for getting the job done right!
Why Truck U Joint Puller Is Necessary?
A truck u joint puller is a necessary tool for any truck owner because it helps to properly remove Universal Joints (U-joints) from drive shafts. The U-joints are essential components of the drivetrain that allow the rotation of the driveshaft while also allowing it to move up and down. U-joints can wear out over time and need to be replaced. A truck u joint puller makes this job much easier and faster. Without a u joint puller, it would be difficult and time consuming to remove these components without causing damage to other parts in the drivetrain system.
Comperision Chart for truck u joint puller
Tiger Tool Commercial U-Joint Service Kit for Heavy Duty Trucks, Commercial U Joint Service Kit for Semi Trucks, Works on Class 6-8 Transportation Trucks and Equipment, 20150
Tiger Tool U Joint Puller for Commercial Trucks, Heavy Duty U Joint Removal Tool, Semi Truck Universal Joint Extractor, U-Joint Removal Press for Class 7-8 Trucks, 10102
OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks
OEMTOOLS 24538 Heavy Duty U-Joint Puller, U Joint Removal Tool, for U Joint Removal Tool Kit
Tiger Tool Commercial U-Joint Service Kit with Medium-Duty UJoint Puller for Heavy Duty Trucks, Works on Class 3-8 Transportation Trucks and Equipment, 20102
Tiger Tool Commercial U-Joint Service Kit for Heavy Duty Trucks Commercial U Joint Service Kit for Semi Trucks, Works on Class 6-8 Transportation Trucks and Equipment, 20150
The Tiger Tool Commercial U-Joint Service Kit is the perfect tool for heavy-duty truck and equipment owners. With its part number 20150, it comes with all the necessary tools to dismantle and assemble virtually all U-joints found on class 6-8 transportation trucks and equipment. It also includes two bearing cap installers, the 10217 and 10201, for quick assembly of your U-joints. With this kit, you’ll be able to efficiently get the job done in no time!
Why We Like This
The Tiger Tool Commercial U-Joint Service Kit is perfect for heavy duty truck and equipment owners, as it has all the necessary tools to dismantle and assemble virtually all U-joints.
It comes with two bearing cap installers, the 10217 and 10201, that make assembly a breeze.
The kit is made in North America to ensure you have what it takes to get the job done right.
It’s suitable for use with Kenworth, Peterbilt, Freightliner, Mack, Volvo and other class 6-8 trucks.
The kit is easy to use and can save you time when working on your truck or equipment.
Common Questions & Answers
Q: Does this kit come with instructions?
A: Yes! The Tiger Tool Commercial U-Joint Service Kit comes with easy to follow instructions so you can easily assemble your U-joints.
Q: What types of vehicles does this kit work on?
A: This kit works on class 6-8 transportation trucks as well as other heavy duty trucks like Kenworth, Peterbilt, Freightliner, Mack, Volvo and more.
Q: Is this product made in North America?
A: Yes! This product is proudly made in North America so you can be assured of quality craftsmanship in every piece of the kit.
Additional Product Information
| Height | 17 |
| Length | 21 |
| Weight | 32.5 |
| Width | 6 |
| Size | One Size |
Tiger Tool U Joint Puller for Commercial Trucks Heavy Duty U Joint Removal Tool, Semi Truck Universal Joint Extractor, U-Joint Removal Press for Class 7-8 Trucks, 10102
800-1000 words
The Tiger Tool U Joint Puller for Commercial Trucks is a heavy duty tool designed to disassemble even the most stubborn U-Joints in minutes. This puller is made from high-grade materials and has been specially designed to work with class 7 and 8 trucks and machinery. It eliminates dangerous vice-and-socket or hammering methods, reducing the risk of damage to driveshafts, yokes, joints or bearing caps.
This puller is suitable for Spicer 1610, 1710, 1760, 1810 and 1880 Series as well as Meritor (Rockwell) 16N, 17N, 18N and 1710 Series. It also works with Spicer SPL 140, 170 and 250 Life Series as well as Meritor RPL 20 and 25 Permalube Series. With its robust construction and proprietary manufacturing processes this tool offers ultimate brute strength when disassembling U-Joints.
Why We Like This
Provides Ultimate Brute Strength for disassembling even the most seized and stubborn U-Joints in minutes
Engineered for use with a 1 inch impact tool
Reduces the risk of damage to driveshaft, yokes, joints or bearing caps
Suitable for use with various models of Class 7-8 transportation trucks and equipment
Manufactured from high-grade materials with proprietary metal treatment processes
Common Questions & Answers
Q: Is this tool suitable for all Class 7 & 8 trucks?
A: Yes it is suitable for all Class 7 & 8 trucks that have a bearing cup of between 1.5 2.2 outside diameter such as Kenworth, Peterbilt, Freightliner etc.
Q: Does this tool work on Meritor (Rockwell) 16N/17N/18N/1710 series?
A: Yes it does work on Meritor (Rockwell) 16N/17N/18N/1710 series.
Q: Can I use this tool with a 1 inch impact tool?
A: Yes you can use this tool with a 1 inch impact tool.
Additional Product Information
| Height | 7.7 |
| Length | 3.6 |
| Width | 10.2 |
| Size | One Size |
OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks
The OTC Tools 5190A Heavy Duty U-Joint Puller is the ideal tool for removing heavy-duty driveline U-joints on Class 7 and 8 Trucks. This high-performance tool comes with a large diameter threaded shaft that can handle U-joints that are severely seized due to corrosion and require more force to disassemble. The smooth, crisp threads allow for a lower, more consistent effort to rotate the shaft, thereby avoiding damage to the driveshaft, yoke, bearing cups or joints. In addition, major tool components are heat treated for improved strength and durability, ensuring a long and productive service life. This puller is also designed to fit Spicer driveline 1610, 1710, 1760, 1810 or 1880; Spicer SPL 140, 170 or 250 ‘Life Series’; Meritor (Rockwell) 16N, 17N, 18N or 1710; and Meritor RPL 20 or 25 ‘Permalube’ series’.
Why We Like This
Ideal tool for removing Heavy-Duty driveline U-Joints on Class 7 and 8 Trucks without the need for heat or hammering
Large diameter threaded shaft can handle U-joints that are severly seized due to corrosion and require more force to disassemble
Smooth, crisp threads allows for a lower, more consistent effort to rotate shaft; will not damage the driveshaft, yoke, bearing cups or joints
Major tool components are heat treated for improved strength and durability
Fits Spicer driveline 1610, 1710, 1760 1810 or 1880; Spicer SPL 140 170 or 250 ‘Life Series’; Meritor (Rockwell) 16N 17N 18N or 1710; Meritor RPL 20 or 25 ‘Permalube’ series’
Common Questions & Answers
Q: What type of truck does this puller fit?
A: This puller fits Class 7 and 8 Trucks as well as Spicer Drivelines 1610 -1880; Spicer SPL 140 – 250 ‘Life Series’; Meritor (Rockwell) 16N -18N; Meritor RPL 20 – 25 ‘Permalube’ series’.
Q: Does this tool require heat or hammering?
A: No. This heavy duty u-joint puller does not require heat nor hammering in order to remove heavy duty driveline u-joints.
Q: Is this product durable?
A: Yes. Major components of this tool are heat treated for improved strength and durability which ensures a long and productive service life.
Additional Product Information
| Length | 12 |
| Weight | 11.4 |
| Width | 9 |
OEMTOOLS 24538 Heavy Duty U-Joint Puller U Joint Removal Tool, for U Joint Removal Tool Kit
The OEMTOOLS 24538 Heavy Duty U-Joint Puller is a powerful and cost-effective tool for removing stubborn seized u joint cups on most class 7 and 8 trucks. This u joint tool is designed to be gentle on vehicles, so there’s no need to resort to hammering or heating methods that can damage the driveshaft, yokes, joints, and bearing cups. The heavy duty u joint removal tool can be used with a 1-inch drive impact wrench or smaller, and the yokes easily fit into the 1.5 to 2.2 inch outside diameter bearing cup. The construction is sturdy and rugged enough to hold up to frequent heavy duty use, so you can trust it to get the job done right without breaking the bank.
Why We Like This
Remove stubborn seized u joint cups on most class 7 and 8 trucks with our heavy duty u joint tool
Prevent damage on the driveshaft, yokes, joints, and bearing cups by utilizing this u joint tool; No need to use hammering or heating methods
Easily torque the u joint removal tool to remove a seized back or front driveshaft U-joint
Built to hold up to frequent heavy duty use
Cost-effective option that gets the job done right without breaking the bank
Common Questions & Answers
Q: Does this U Joint Removal Tool Kit work on all types of vehicles?
A: Yes, it works on most class 7 and 8 trucks.
Q: Is this product easy to use?
A: Yes! It can be used with a 1-inch drive impact wrench or smaller and fits into 1.5 – 2.2 inch outside diameter bearing cups easily.
Q: Is this product built for heavy duty use?
A: Absolutely! It is designed for frequent heavy duty use with its durable construction.
Additional Product Information
| Height | 13.6 |
| Length | 8.5 |
| Weight | 11.75 |
| Width | 3.7 |
| Size | Heavy Duty U-Joint Puller |
Tiger Tool Commercial U-Joint Service Kit with Medium-Duty UJoint Puller for Heavy Duty Trucks Works on Class 3-8 Transportation Trucks and Equipment, 20102
The Tiger Tool 20102 Commercial U-Joint Service Kit is a must-have for servicing medium and heavy-duty transportation trucks and equipment. This kit includes all of the necessary tools for disassembling, installing, and repairing U-joints on virtually all Class 3 to 8 trucks and buses. The 10102 provides ultimate brute strength for disassembling even the most seized u-joints in minutes, while the 10104 provides ultimate strength for medium duty vehicles. Also included are the 10217 SPL Bearing Cap Installer and 10201 Bolt-Retained Bearing Cap Installer. All of these tools are proudly made in North America to ensure that you have what it takes to get the job done right.
Why We Like This
All necessary tools included
Provides ultimate brute strength
Accurately installs bearing caps in minutes
Works on Class 3 to 8 transportation trucks and buses
Proudly made in North America
Common Questions & Answers
Q: Is this kit compatible with Ram 3500/5500?
A: Yes, this kit is compatible with Ram 3500/5500.
Q: Does this kit work on medium duty vehicles?
A: Yes, the 10104 provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all medium duty vehicles.
Q: Is this product made in North America?
A: Yes, all of these tools are proudly made in North America to ensure that you have what it takes to get the job done right.
Additional Product Information
| Height | 17 |
| Length | 21 |
| Width | 6 |
| Size | One Size |
Benefits of Truck U Joint Puller
1. Quick and easy removal of u joints without damage to the parts.
2. Designed to fit most popular truck differential yokes and u joints.
3. Allows for a precise fit with minimal effort and ensures proper installation when replacing u joints.
4. Eliminates the need for prying and hammering which can cause damage to the parts during removal or installation.
5. All parts are hardened steel for superior strength and durability, ensuring a long-lasting product that won’t break or wear down with frequent use.
6. Compact design makes it easy to store in small spaces, making it ideal for both professional mechanics and DIYers alike.
Buying Guide for truck u joint puller
What is a Truck U Joint Puller?
A truck u joint puller is a specialized tool used to remove a universal joint, or U joint, from an axle shaft on the drivetrain of a truck. It is designed to be able to fit around the U joint and provide the necessary torque for it to be removed without damaging it.
Uses of a Truck U Joint Puller
The primary use of a truck u joint puller is to safely remove and replace a worn-out or damaged U joint. This can be done quickly and easily as long as you have the right tools and know-how. The puller tool itself is designed to fit around the U joint and provide the necessary torque needed to remove it without damaging it. In addition, it can also be used in other automotive applications such as removing wheel bearings, bushings, seals, etc.
Types of Truck U Joint Pullers
There are two main types of truck u joint pullers: manual and hydraulic. Manual pullers require more physical effort as they rely on manual force for removal/installation whereas hydraulic pullers use hydraulics for removal/installation and require less physical effort. Both types are available in various sizes and configurations depending on your application needs.
How to Choose the Right Truck U Joint Puller
When choosing a truck u joint puller, its important to consider your specific application needs. First, determine what type of truck you have so you can find the correct size and configuration for your vehicles axles. Additionally, if you need more torque than what manual models provide, then consider investing in a hydraulic model that provides extra power when needed. Finally, make sure that you choose one with good quality construction that will last through repeated use over time.
Safety Tips When Using a Truck U Joint Puller
When using any type of tool, safety should always be your priority. Before using any truck u joint puller make sure that all safety guards are in place and securely fastened before starting any work on your vehicles drivetrain components. Additionally, always wear protective gear such as gloves, safety glasses or goggles while working with tools such as this one in order to prevent injury from flying debris or parts from breaking off during removal/installation processes.
The truck U joint puller is a valuable tool that can make the task of removing a U joint from a vehicle much easier and more efficient. It is an essential tool that is used by many mechanics and technicians, and it can save valuable time when performing any job requiring the removal of a U joint. This tool is simple to use and can be found at most auto parts stores or online. With its convenience and affordability, it is an invaluable asset for any mechanic or technician.
