The most important thing to look for in a subwoofer is the size of the woofer. The bigger the woofer, the lower the frequencies that it can reproduce. In general, you want a subwoofer with a woofer that is at least 8 inches in diameter. However, if you are looking for a subwoofer to use in a small space, such as a car, you may be able to get away with a smaller woofer.
Another important consideration is the power rating of thesubwoofer. The power rating tells you how much power thesubwoofer can handle. The higher the power rating, the louderthe subwoofer can play without distortion.
Finally, you also need to consider the impedance of thesubwoofer. The impedance is measured in ohms and it tellsyou how much resistance the subwoofer has to the electricalcurrent. A higher impedance means that the subwoofer willdraw more power from your amplifier, so you need to make surethat your amplifier can handle the extra load. Mostsubwoofers have an impedance of 4 ohms or 8 ohms.
Why 6 Inch Subwoofer 4 Ohm Is Necessary?
There are a few reasons why a 6 inch subwoofer 4 ohm is necessary. First, if you have a smaller car, the extra space that the subwoofer takes up can be vital. Second, the extra power that the 4 ohm subwoofer provides can be crucial in getting your music to sound its best. Finally, the Subwoofers ability to reproduce low frequencies accurately is essential for bass-heavy music genres such as hip-hop and EDM.
Comparison Table for 6 Inch Subwoofer 4 Ohm
6 Inch Subwoofer 4 Ohm Guidance
Car Vehicle Subwoofer Audio Speaker – 6.5 Non-Pressed Paper Cone, Black Plastic Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, Foam Surround for Vehicle Stereo Sound System – Pyle PLPW6D
The Pyle PLPW6D car subwoofer is a great way to enhance the sound of your car stereo or radio. It has a power of 300 watt RMS to 600 watt peak and a sensitivity or SPL of 89dB to produce high sound resonance. The subwoofer has a dual 4 ohm impedance that can be wired as 4 or 8 ohm, and comes with a 15” 4-layer dual voice coil to resist corrosion and ensure a long life span. The subwoofer is made entirely of specially treated foam surround for durability, and is designed with this non-fatiguing suspension to keep equipment safe. It has a clean-cut car subwoofer design with a non-pressed paper cone and black plastic basket. The subwoofer is easy to install with its 29” mounting depth and fits most audio systems for cars, boats or RVs. The overall diameter is 6 inch. Included are the necessary cables, installation template and manual.
Common Questions on Car Vehicle Subwoofer Audio Speaker – 6.5 Non-Pressed Paper Cone, Black Plastic Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, Foam Surround for Vehicle Stereo Sound System – Pyle PLPW6D
• What is the size of the product?6.5 inches
• What is the cone made out of?
Non-pressed paper
• What is the basket material?
Black plastic
• What is the impedance?
Dual voice coil 4 ohm impedance
• How much power can this product handle?
600 watts
Why We Like This
• 600 watt power• Dual voice coil• Treated foam surround• Non pressed paper cone• 29″ mounting depth
Additional Product Information
| Color | 6-inch |
| Height | 3.75 Inches |
| Length | 7 Inches |
| Weight | 2.65 Pounds |
Dayton Audio RS150-4 6″ Reference Woofer 4 Ohm
Dayton Audio RS150-4 6″ Reference Woofer 4 Ohm is the perfect addition to any car audio system. The RS150-4 features a high-end low-distortion motor with two shorting paths to reduce inductance, making it an excellent choice for car audio midrange/midbass applications. The 4 ohm impedance is perfect for series pairs in MTMs and center channel speakers.
Common Questions on Dayton Audio RS150-4 6″ Reference Woofer 4 Ohm
• What is the Dayton Audio RS150-4?The Dayton Audio RS150-4 is a 6″ reference woofer with a 4 ohm impedance.
• What are the dimensions of the Dayton Audio RS150-4?
The Dayton Audio RS150-4 has the following dimensions: 6.5″ diameter x 5.875″ height.
• What is the power handling of the Dayton Audio RS150-4?
The Dayton Audio RS150-4 can handle up to 50 watts RMS of power.
• What is the frequency response of the Dayton Audio RS150-4?
The Dayton Audio RS150-4 has a frequency response of 62 Hz – 20 kHz.
• What is the sensitivity of the Dayton Audio RS150-4?
The Dayton Audio RS150-4 has a sensitivity of 86 dB.
Why We Like This
1. The Dayton Audio RS150 4 6″ Reference Woofer 4 Ohm is perfect for series pairs in MTMs and center channel speakers.
2. The RS150 4 has an excellent car audio midrange/midbass.
3. The RS150 4 has a high end low distortion motor with two shorting paths to reduce inductance.
4. The RS150 4 is highly efficient and can handle high power levels.
5. The RS150 4 has a wide frequency response and produces accurate sound.
Additional Product Information
| Height | 3.9 Inches |
| Length | 6.2 Inches |
Audiopipe 6″ Woofer 150W Max 4 Ohm DVC Sold Each
Audiopipe is a company that specializes in audio equipment, and they offer a 6″ Woofer that is 150W Max and 4 Ohm DVC. This product is designed to give you great sound quality, and it is sold individually so that you can get the perfect sound for your needs. This product is perfect for anyone who is looking for a great way to improve their sound system, and it is a great value for the money.
Common Questions on Audiopipe 6″ Woofer 150W Max 4 Ohm DVC Sold Each
• What is the model number of this product?The model number is APSW6.
• What is the purpose of this product?
This product is a 6″ woofer designed for 150W max power and 4 Ohm impedance.
• What are the dimensions of this product?
This product has a diameter of 6 inches.
• What is the weight of this product?
This product weighs 2.2 pounds.
• What is the warranty period for this product?
This product has a one-year limited warranty.
Why We Like This
6″ Woofer with 150W Max power handling
4 Ohm DVC (dual voice coil) design
Ideal for use in car audio applications
Sold each
Frequency response: 40Hz 5kHz
Additional Product Information
| Height | 8 Inches |
| Length | 8 Inches |
| Weight | 4.03 Pounds |
6″ Car Audio Speaker Subwoofer – 300 Watt High Power Bass Surround Sound Stereo Subwoofer Speaker System w/ Molded P.P. Cone, 86 dB, 4Ohm, 40 oz Magnet,1 inch KAPTON Voice Coil – Pyramid PW677X
Looking for an affordable and reliable 6″ car audio speaker subwoofer? Look no further than the Pyramid PW677X. This unit features a maximum power output of 300 watts peak power / 150 watts RMS for full range surround stereo sound reproduction and impressive bass response. It also includes a new design injection molded PP cone and specially treated black rubber edge suspension in a chrome finish basket, a bumped / vented yoke plate for extended excursion, and a rubber magnet boot for better protection. Additionally, the PW677X has an 86 dB sensitivity and 4 ohm impedance rating that compensates for the undersized wire found in many of today’s cars, ultimately reducing distortion so you can enjoy a crisp and clear sound. For added longevity, this subwoofer also features a 40 oz magnet structure and 1 inch KAPTON voice coil. Best of all, the PW677X is a standard size 6″ speaker, making it perfect for new speaker construction or replacing worn / blown speakers.
Common Questions on 6″ Car Audio Speaker Subwoofer – 300 Watt High Power Bass Surround Sound Stereo Subwoofer Speaker System w/ Molded P.P. Cone, 86 dB, 4Ohm, 40 oz Magnet,1 inch KAPTON Voice Coil – Pyramid PW677X
• What are the dimensions of this speaker?The speaker has a diameter of 6 inches.
• What is the maximum power output of this speaker?
The maximum power output of this speaker is 300 watts.
• What is the frequency response range of this speaker?
The frequency response range of this speaker is 40 Hz to 1 kHz.
• What is the sensitivity of this speaker?
The sensitivity of this speaker is 86 dB.
• What is the impedance of this speaker?
The impedance of this speaker is 4 ohms.
Why We Like This
• 300 Watt High Power Bass Surround Sound Stereo Subwoofer Speaker System• Features new design injection molded PP cone and specially treated black rubber edge suspension in a chrome finish basket• Bumped/vented yoke plate for extended excursion and rubber magnet boot for better protection• The audio projection subwoofer has 86 dB and 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars• It ultimately reduces distortion so you can enjoy a crisp and clear sound• Complete subwoofer features 40 oz magnet structure and 1 inch KAPTON voice coil to enhance its performance and can handle higher operating temperatures• silver plated terminal• 6″ Standard Size: Pyramid easy to mount car speaker follows the standard size for most vehicle stereo systems• It has a 2.89″ mounting depth and 6.5″ overall diameter• Perfect for new speaker construction or replacing worn/blown speakers
Additional Product Information
| Color | Black |
| Height | 3.63 Inches |
| Length | 7.25 Inches |
| Weight | 2.95 Pounds |
Massive Audio HIPPOXL64 – 6 Inch Car Audio Subwoofer, High Performance Subwoofer for Cars, Trucks, Jeeps – 6″ Subwoofer 300 Watt RMS, 600w MAX Dual 4 Ohm, 2 Inch Voice Coil. Sold Individually
The HippoXL64 subwoofer from Massive Audio is a high performance car audio subwoofer that is built for competition. With a 90oz high energy double stack strontium magnet structure, heavy duty, rugged industrial textured cast aluminum basket, oversized mirror image dual poly/nomex spiders, this subwoofer is one of the most popular used by car audio enthusiasts for big sound and high scores. The HIPPOXL64 subwoofer features dual impedance high temp aluminum 2″ voice coil former with Kevlar spunlace, Kevlar fiber reinforced non-pressed paper cone with industrial textured finish, and red stitched edge to the cone’s edge for added strength. This subwoofer handles 300 watts RMS and 600 watts MAX, 2″ dual 4 ohm voice coils. It is truly a great car subwoofer at an affordable price. With our black anodized one piece pole-plate for added motor force, heavy duty direct input wires connection to voice coils, reinforced fiberglass woven dust cap for high power applications, it is guaranteed to impress. Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.
Common Questions on Massive Audio HIPPOXL64 – 6 Inch Car Audio Subwoofer, High Performance Subwoofer for Cars, Trucks, Jeeps – 6″ Subwoofer 300 Watt RMS, 600w MAX Dual 4 Ohm, 2 Inch Voice Coil. Sold Individually
• What are the dimensions of the Massive Audio HIPPOXL64 – 6 Inch Car Audio Subwoofer?The Massive Audio HIPPOXL64 is 6 inches in diameter.
• How much power does the Massive Audio HIPPOXL64 – 6 Inch Car Audio Subwoofer have?
The Massive Audio HIPPOXL64 has 300 watts of RMS power and 600 watts of peak power.
• What is the sensitivity of the Massive Audio HIPPOXL64 – 6 Inch Car Audio Subwoofer?
The sensitivity of the Massive Audio HIPPOXL64 is 86 dB.
• What is the impedance of the Massive Audio HIPPOXL64 – 6 Inch Car Audio Subwoofer?
The impedance of the Massive Audio HIPPOXL64 is 4 ohms.
• What is the frequency response of the Massive Audio HIPPOXL64 – 6 Inch Car Audio Subwoofer?
The frequency response of the Massive Audio HIPPOXL64 is 20 Hz – 200 Hz.
Why We Like This
• 65 Inch Subwoofer• 300 Watts RMS• 600 Watts MAX• Dual 4 Ohm Voice Coils• 2 Inch Voice Coil• One Piece Pole Plate• Strontium Magnet Structure• Rugged Industrial Textured Cast Aluminum Basket
Additional Product Information
| Color | Black |
| Height | 8 Inches |
| Length | 7 Inches |
| Weight | 11.03 Pounds |
Benefits of 6 Inch Subwoofer 4 Ohm
If you are looking for an upgrade to your car’s audio system, then a 6 inch subwoofer 4 ohm is a great choice. This size of speaker is able to produce more bass than smaller models, and it will also last longer. In addition, this size is less likely to cause distortion at high volumes. When shopping for a new subwoofer, be sure to look for one that has a RMS (root mean square) power rating of at least 150 watts. This will ensure that your new speaker can handle the extra power without damaging itself.
Buying Guide for 6 Inch Subwoofer 4 Ohm
Nowadays, 6 inch subwoofer 4 ohm is one of the most popular and required Woofers for music lovers. This Woofer provides excellent and powerful sound along with long lasting durability. There are different companies that offer this product at various prices. Here is a buying guide that will help you select the best 6 inch subwoofer 4 ohm as per your requirements and budget.
There are different features that you need to look for while buying a 6 inch subwoofer 4 ohm:
1) Driver size: The driver size is an important factor that determines the quality of sound produced by the Woofer. A larger driver size usually means better sound quality. However, it also depends on other factors such as design, cone material, etc.
2) Cone material: The cone material also plays an important role in determining the sound quality of the Woofer. A stiffer cone material usually results in better sound quality. However, it should not be too hard or else it will result in less bass response.
3) Design: The design of theWoofer also affects its performance. A well-designed Woofer usually performs better than one with a poor design.
Frequently Asked Question
What are the specifications of the 6 inch subwoofer 4 ohm?
In general, a 6 inch subwoofer 4 ohm will have a frequency range of 20-200 Hz, a power handling capacity of 75-200 watts, and an impedance of 4 ohms.
What is the power rating of the 6 inch subwoofer 4 ohm?
The power rating of the 6 inch subwoofer 4 ohm is 120 watts.
What is the input sensitivity of the 6 inch subwoofer 4 ohm?
The input sensitivity of the 6 inch subwoofer 4 ohm is 87 dB.
What is the frequency response of the 6 inch subwoofer 4 ohm?
The frequency response of the 6 inch subwoofer 4 ohm is 20-200 Hz.
What is the maximum SPL of the 6 inch subwoofer 4 ohm?
The maximum SPL of the 6 inch subwoofer 4 ohm is 95 dB.
Conclusion
If you are looking for a quality 6 inch subwoofer with great sound, then this is the perfect product for you. It has a great price and it will definitely improve the sound quality of your car stereo.
