The camshaft position sensor is used to synchronize the firing of the spark plugs with the movement of the pistons. It is a vital part of the engine’s ignition system. A faulty camshaft position sensor can cause misfires, a rough idle, and poor fuel economy.
Why 5.7 Vortec Camshaft Position Sensor Is Necessary?
A camshaft position sensor is necessary in order to determine the position of the camshaft and to synchronize the engine’s firing sequence. The sensor allows the engine control unit (ECU) to know when to fire each spark plug, so that the engine runs smoothly.
Comparison Table for 5.7 Vortec Camshaft Position Sensor
5.7 Vortec Camshaft Position Sensor Guidance
CAM Camshaft Position Sensor 10490645 10485432 Compatible with Chevy Blazer C1500 C2500 C3500 Astro P30 K1500 K2500 K3500 Express G30 S10 Silverado Sonora GMC Jimmy Safari Savana Sierra/ZBN
If your car’s engine isn’t running as smoothly as it should be, it might be time to replace the camshaft position sensor. The camshaft position sensor is designed to monitor the position of the camshaft and ensure that it is in the correct position. It does this by sending a signal to the engine control unit (ECU) which tells the ECU when to fire the spark plugs. If the camshaft position sensor is not working correctly, it can cause the engine to misfire or run rough. Replacing the camshaft position sensor is an easy job that can be done at home with a few tools.
The first step is to locate the camshaft position sensor. On most vehicles, the sensor is located near the front of the engine, on the side of the cylinder head. Once you have found the sensor, you will need to remove the electrical connector from the sensor. Next, use a wrench to loosen the bolts that secure the sensor in place. Once the bolts are loosened, you can remove the sensor.
To install the new sensor, simply reverse the above process. Be sure to tighten the bolts securely, and then reconnect the electrical connector. Once the sensor is in place, start the engine
Common Questions on CAM Camshaft Position Sensor 10490645 10485432 Compatible with Chevy Blazer C1500 C2500 C3500 Astro P30 K1500 K2500 K3500 Express G30 S10 Silverado Sonora GMC Jimmy Safari Savana Sierra/ZBN
• What does the CAM sensor do?The CAM sensor helps determine the position of the piston.
•Where is the CAM sensor located?
The CAM sensor is usually located near the front of the engine, on the side of the cylinder head.
•How often should the CAM sensor be replaced?
As with most sensors, the CAM sensor should be replaced every few years or according to your vehicle’s maintenance schedule.
•What are the symptoms of a bad CAM sensor?
A bad CAM sensor can cause the engine to run erratically or fail to start.
Why We Like This
• 1. 12 Months warranty• 2. Part Number Fitment: 10485432, 10490645, 10496045, 213920, 38631305, 8104854320, 8104926450, LX756, 4P1229, DR188• 3. CAM Camshaft Position Sensor Fits 10490645 Compatible With Chevy Blazer C1500 C2500 C3500 Astro P30 K1500 K2500 K3500 Express G30 S10 Silverado Sonora GMC Jimmy Safari Savana Sierra• 4. Pls check your vehicle fitment carefully again in the product description followed to avoid any wrong purchase• 5. Pls keep the package in good condition if you want to return it
Additional Product Information
| Color | 10490645 |
ACDelco Professional 213-4664 Engine Camshaft Position Sensor
The ACDelco Professional 213-4664 Engine Camshaft Position Sensor is a premium aftermarket replacement that provides the performance and dependability you expect from ACDelco. It is manufactured to meet expectations for fit, form, and function.
Common Questions on ACDelco Professional 213-4664 Engine Camshaft Position Sensor
• What is the part number for the ACDelco Professional engine camshaft position sensor?21-4664 engine camshaft position sensor.
• What is the warranty on the ACDelco Professional engine camshaft position sensor?
One year.
• How long does it take to install the ACDelco Professional engine camshaft position sensor?
Less than an hour.
• What type of engine does the ACDelco Professional engine camshaft position sensor fit?
V6 engines.
• Is the ACDelco Professional engine camshaft position sensor easy to install?
Yes, it is a direct replacement for the original equipment sensor.
Why We Like This
Dependable
Professional grade
OE fit and function
Aftermarket replacement
Affordable
Additional Product Information
| Height | 2.2 Inches |
| Length | 4.3 Inches |
| Weight | 0.16 Pounds |
CPS Crankshaft Position Sensor 12596851 5S1695 Compatible With GMC Pickup Chevy Silverado Suburban C1500 K1500 K2500 K3500 G30 P30 Cadillac
The crankshaft position sensor is located at the front of the engine, near the crankshaft pulley. The sensor measures the position of the crankshaft and relays this information to the engine computer. This allows the computer to determine when each cylinder is firing and initiate the spark at the correct time.
A faulty crankshaft position sensor can cause a number of problems, including engine misfires, stalling and decreased fuel efficiency. If you suspect your crankshaft position sensor is failing, have the vehicle inspected by a professional technician to avoid engine damage.
Common Questions on CPS Crankshaft Position Sensor 12596851 5S1695 Compatible With GMC Pickup Chevy Silverado Suburban C1500 K1500 K2500 K3500 G30 P30 Cadillac
• What is the name brand of the CPS Crankshaft Position Sensor 12596851 5S1695 Compatible With GMC Pickup Chevy Silverado Suburban C1500 K1500 K2500 K3500 G30 P30 Cadillac?The name brand is GMC.
• What is the model number of the CPS Crankshaft Position Sensor 12596851 5S1695 Compatible With GMC Pickup Chevy Silverado Suburban C1500 K1500 K2500 K3500 G30 P30 Cadillac?
The model number is 12596851.
• What is the Identification Number of the CPS Crankshaft Position Sensor 12596851 5S1695 Compatible With GMC Pickup Chevy Silverado Suburban C1500 K1500 K2500 K3500 G30 P30 Cadillac?
The Identification Number is 5S1695.
• What is the part type of the CPS Crankshaft Position Sensor 12596851 5S1695 Compatible With GMC Pickup Chevy Silverado Suburban C1500 K1500 K2500 K3500 G30 P30 Cadillac?
The part type is a CPS sensor.
Q
Why We Like This
• 1. Tested Before On Sale• 2. Easy Installation• 3. Fitment Info In The Product Description• 4. Fast Shipment• 5. If You Have Any Questions, Please Tell Us• 6. We Will Give You Satisfactory Solutions In Time
Standard Motor Products PC123T Crankshaft Position Sensor Assorted
Standard Motor Products PC123T Crankshaft Position Sensor Assorted is a top quality product that is perfect for your car. It is made with top quality materials and it is very durable. It is also very easy to install and it comes with all the necessary hardware.
Common Questions on Standard Motor Products PC123T Crankshaft Position Sensor Assorted
• What is the Standard Motor Products PC123T Crankshaft Position Sensor Assorted?The Standard Motor Products PC123T Crankshaft Position Sensor Assorted is a sensor that is used to detect the position of the crankshaft.
• Where is the Standard Motor Products PC123T Crankshaft Position Sensor Assorted located?
The Standard Motor Products PC123T Crankshaft Position Sensor Assorted is located on the engine block.
• How does the Standard Motor Products PC123T Crankshaft Position Sensor Assorted work?
The Standard Motor Products PC123T Crankshaft Position Sensor Assorted works by detecting the position of the crankshaft and sending a signal to the engine control unit.
• What are the symptoms of a failing Standard Motor Products PC123T Crankshaft Position Sensor Assorted?
Symptoms of a failing Standard Motor Products PC123T Crankshaft Position Sensor Assorted include the engine stalling, the engine not starting, and the check engine light coming on.
• How do you replace the Standard Motor Products PC123T Crankshaft Position Sensor Assorted
Why We Like This
• • 1. Crankshaft position sensor assorted from Standard Motor Products.• 2. Made in the USA.• 3. Package dimensions: 13 x 99 x 103 inches.• 4. Helps ensure proper engine operation.• 5. Easy to install.
Additional Product Information
| Color | Assorted |
| Height | 4.1 Inches |
| Length | 2.2 Inches |
| Weight | 0.13 Pounds |
ACDelco Professional 213-4761 Engine Crankshaft Position Sensor
The ACDelco Professional 213-4761 Engine Crankshaft Position Sensor is a top quality replacement for your old or damaged sensor. It is made to meet or exceed the original equipment specifications for fit, form, and function. Additionally, it features a blade terminal type for easy installation.
Common Questions on ACDelco Professional 213-4761 Engine Crankshaft Position Sensor
• What is the part number for the ACDelco Professional Engine Crankshaft Position Sensor?The part number is 213-4761.
• What is the function of the ACDelco Professional Engine Crankshaft Position Sensor?
The sensor monitors the position and rotation of the crankshaft and sends this information to the vehicle’s engine control unit (ECU). This allows the ECU to properly time the ignition and fuel injection cycles.
Why We Like This
1. Professional, premium aftermarket replacement
2. Provides the performance and dependability you expect from ACDelco
3. Terminal Type: Blade
4. Manufactured to meet expectations for fit, form, and function
5. Engineered for reliable operation
Additional Product Information
| Height | 2.2 Inches |
| Length | 4.3 Inches |
| Weight | 0.2 Pounds |
Benefits of 5.7 Vortec Camshaft Position Sensor
The 5.7 vortec camshaft position sensor is an important engine management component that helps the engine control module to synchronize the firing of the spark plugs with the rotation of the camshaft. This ensures that each cylinder receives the correct amount of fuel and air mixture for combustion.
The 5.7 vortec camshaft position sensor also known as a CMP sensor, is mounted on top of the engine’s front cover near the timing chain or belt area.
Buying Guide for 5.7 Vortec Camshaft Position Sensor
The camshaft position sensor on a 5.7 vortec engine is located at the back of the engine, behind the cylinder head. It is a round, black sensor with two wires leading to it. The sensor itself is non-serviceable, but can be replaced if necessary.
If your engine is having trouble starting, or if it is running rough, the camshaft position sensor may be to blame. Symptoms of a failing camshaft position sensor include misfires, poor fuel economy, and stalling. Replacing the sensor is relatively simple and can be done without specialized tools or equipment.
To replace the camshaft position sensor on a 5.7 vortec engine:
1) Locate the sensor at the back of the engine behind the cylinder head. It will be a round, black sensor with two wires leading to it.
2) Disconnect the wires from the old sensor by pulling on them gently until they come loose from the sensors electrical connector.
3) Remove old Sensor by unscrewing it counterclockwise with your fingers (it may be helpful to use pliers). Be careful not to drop or damage any of the small parts insideSensor area while removing old one! Allowing dirt & debris to enter this area could cause big problems!5 destroy new Sensor if this happens…do not tryto clean off old Sensor – just get new one right away]. Clean out any debris in area before proceeding…this little step could save you A LOT OF TIME & money down road! *wink*4) Screw in new Sensor clockwise until snug then turn 1/4 – 1/2 turn more w/ same tool [or fingers]. DO NOT OVERTIGHTEN AS THIS COULD STRIP OUT THREADS IN SENSOR OR CAUSE IT TO BREAK! Just “snug” should do it ]=D>5) Reconnect wires to new Sensor being sure they fit snugly into each side of electrical connector [should just “click” into place]. If you have trouble getting them seated all way then make sure you are putting RIGHT wire into RIGHT side hole [they are different sizes so cannot go wrong here] 6) Done
Frequently Asked Question
What is the function of the vortec camshaft position sensor?
The Vortec camshaft position sensor is used to help the engine control module (ECM) synchronize the firing of the spark plugs with the position of the pistons.
How does the vortec camshaft position sensor work?
The Vortec camshaft position sensor is located on the back of the cylinder head, above the camshaft. It consists of a sensor and a magnet. The sensor is mounted on a bracket that is held in place by two bolts. The magnet is mounted on the end of the camshaft. As the camshaft rotates, the magnet passes by the sensor. This causes a change in the magnetic field, which the sensor detects. The sensor converts the change in magnetic field into a electrical signal, which is sent to the engine control module. The engine control module uses the signal from the sensor to determine the position of the camshaft.
What are the symptoms of a faulty vortec camshaft position sensor?
The symptoms of a faulty vortec camshaft position sensor are: 1. The engine will not start 2. The engine will stall 3. The engine will run rough
How do you test the vortec camshaft position sensor to see if it is working properly?
There are a few ways to test a camshaft position sensor: 1. Check for power and ground at the sensor using a multimeter. 2. Check the signal wire from the sensor to the computer using a multimeter. 3. Check the signal from the sensor using an oscilloscope.
What are some common causes of a vortec camshaft position sensor failure?
There are a few common causes of a vortec camshaft position sensor failure. One is simply wear and tear on the sensor itself. Another common cause is a build-up of debris or oil on the sensor, which can interfere with its ability to accurately read the camshaft position. Finally, a vortec camshaft position sensor can fail if the timing belt or chain that it is reading has skipped a tooth or two, throwing off the sensor’s reading.
Conclusion
The 5.7 vortec camshaft position sensor will do a great job of ensuring that your car’s engine is running correctly and smoothly. It’s small and easy to install, so you’ll be able to get it up and running in no time.
